Page tree
Skip to end of metadata
Go to start of metadata
Introduction

Application servers can communicate with the Nx70 via the MQTT protocol.

The MQTT access can be configured via the:

  • Web-interface
  • Auto-provisioning

You can connect using:

  • Pre-shared key (PSK) using port 8884
  • Certificates using port 8885


Configuration

In the Nx70 web-interface go to: SETTINGS - Online services - Application servers

If this page is not visible, use the provisioning file below to enable this page.

You need to create the provisioning file below and start provisioning (Can be done via the web-interface)

Enable MQTT web-page via provisioning

<?xml version="1.0" encoding="UTF-8"?>
<provisioning version="1.1" productID="e2">

<nvm>

<oper name="set_webui_visibility">

<param name="menu.settings/online-services/application-servers" value="visible" />

</oper>

</nvm>
</provisioning>


After the provisioning, the Application Servers page is now visible.


Create an Account for an Application server

You now can create an application server access.

  • Id: id for external clients are: "as1", "as2" ...
  • Application server name (username) (At least one character is needed)
  • Password (has to be at least 32 characters using hexadecimal digits only: 0 1 2 3 4 5 6 7 8 9 a b c d e f A B C D E F)


Create an account via auto-provisioning

<?xml version="1.0" encoding="UTF-8"?>
<provisioning version="1.1" productID="e2">

<nvm>

<oper name="set_external_client">

<param name="Username" value="as1" />
<param name="Password" value="123456789012345678901234567890ab" />

</oper>

</nvm>
</provisioning>

  • No labels