To check if the customers network can be used for LAN synchronisation. You can install an Integrator / DECT manager and some base stations in the customer network that are synchronised via LAN.
From software 2.29.1 we have the LAN sync quality visible in the Base-station events see: FAQ Nx70 - Base station events, q-idx-lt, o-thr-exc, d-thr-exc (LAN synchronization)
For previous software, see below.
Enable the CLI access on the Integrator / DECT manager.
Connect a PC to the customer network and run the batch script below that connects with the DECT base stations that are synchronised via LAN. You do not need to connect to the DECT manager.
Run the Batch file below.
- Results will be written every minute in the c:\temp\ directory when not available change the script to write to another directory.
- Change the host= to the IP address of your base station.
- Change the password= to the CLI password.
- The ssh_client= points to the location of plink.exe that is part of PuTTY. You can find PuTTY on the Internet.
Let it run for a day or longer and check if the values are within the supported limits.
Collect LAN sync batch file
set ssh_client="c:\Program Files\PuTTy\plink"
echo Start dlsd.status.log at %host% !time! > %logfile%
FOR /L %%N IN (1,1,1440) DO (
echo ************************* >> %logfile%
echo new dlsd status logged at !time! >> %logfile%
echo new dlsd status logged at !time!
%ssh_client% -pw %password% cli@%host% "cat /tmp/log/dlsd.status" >> %logfile%
ping 127.0.0.1 -n 61 > nul