Valid for: 
From SW version: 2.52

N670N870N870EN870 VI
Introduction

Here we describe the configuration/installation of the Nx70 to be used together with teams.

  1. Upgrade the Nx70 to the firmware 2.52 or higher
  2. Download the following provisioning file that contains the basic Microsoft Teams settings:
    1. Provisioning file for the Microsoft teams production environment
  3. In the web-interface go to: SETTINGS - System - Provisioning and configuration and start provisioning using the above provisioning file
  4. Add an DECT handset: SETTINGS - Mobile devices - Administration
    1. Select as VoIP provider "Microsoft Teams onboarding"
  5. Register the handset, after successful registration, the handset is configured


Provider or PBX profiles

The Nx70 supports up to 20 different Provider or PBX profiles.

Microsoft Teams normally uses profile 2/3 but could also use Profile 4/5

Provider or PBX profileDescription

Can be used to connect to another VoIP platform, provisioning is also supported

DECT handsets that are Signed-in the Microsoft Teams platform will automatically via auto-provisioning use this profile.

They have an valid SIP account that has the rights to make and receive calls.

DECT handsets that are Signed-out the Microsoft Teams platform will automatically via auto-provisioning use this profile.

They have an SIP onboarding account but this account can't be used to make and receive calls.

Can be used by Microsoft Teams

Can be used by Microsoft Teams

  →   

Can be used to connect to another VoIP platform, provisioning is also supported
Service information

Onboarding account:

This is an SIP account created by Microsoft used to be able to start the Microsoft Sign-in procedure. With this account it is not possible to make or receive calls.

Add an DECT handset:

When you add an new handset, only when an valid IPUI number is used an onboarding account is created. Adding an DECT handset using fixed numbering or placeholders is not supported.

Replace an existing handset:

Microsoft binds an valid IPUI number with an Teams user. If the DECT handset has to be replaced, you need to start adding an new DECT handset and the Microsoft Sign-in procedure to add this new IPUI to the Teams user. Using the handset replace option in the web-interface is not possible.

Provisioning:

You are used that an platform configures an complete DECT system, Microsoft Teams integration configures one handset and not the whole DECT system. Microsoft teams has no knowledge about the handset location.

Only adding an DECT handset using an IPUI and selecting the "Microsoft Teams onboarding" "Provider or PBX profiles" starts Microsoft teams provisioning.

New or Re-registration of the DECT handset starts provisioning only for this handset.

An check-sync send by the Microsoft platform to the handset SIP account will start provisioning only for this DECT handset.

Handset provisioning will not start using existing methods like: Reboot / After time / Click on Start provisioning in web-interface.


  • No labels