Page tree
Skip to end of metadata
Go to start of metadata
Introduction

The page contains the following information on incidents concerning DECT manager operation. 

In the web-interface go to: SETTINGS - System - System log



Debug mode

The Debug mode is only used when it is known how to reproduce. When the logs are collected, the Debug mode must be disabled. The debug mode should only be used to collect logs for a short time.

Auto-provisioning
ParameterDescription

dm.local.SysLogEnable

or

dm.@.SysLogEnable

0: Off
1: On

dm.local.SysLogServer

or

dm.@.SysLogServer

Server address: Enter the IP address or the (fully qualified) DNS name of your Syslog server.

dm.local.SysLogServerPort

or

dm.@.SysLogServerPort

Server port: Enter the port number, where the Syslog server expects to receive requests.

dm.local.SyslogProtocol

or

dm.@.SyslogProtocol

SyslogProtocol

tcp

udp

In software 2.36 this setting can't be changed via provisioning, this will be changed.

  • No labels