Introduction

Polycom devices can be provisioned by the T440/640 PBX system with SIP account data and other configurations.

Following devices are supported:

  • Soundstation IP 5000
  • Soundstation IP 6000
  • Soundstation IP 7000

Conditions

 

In order to provision the Polycom devices automatically following details must be secured:

  • DHCP server in the T440/640 must be activated
  • Polycom provisioning must be enabled (by default)
  • Option "Add devices automatically" must be enabled (by default)

Options

In case the internal DHCP can't be used, there are 3 options to make the provisioning working with the Polycom devices:

  1. Use Option 66 in the existing to inform the device during DHCP procedure about the provisioning server
    TFTP Server Name: http://ftp:ftp@<ip-address-pbx>/prov/polycom
  2. After finished boot process of the polycom device enter the menu and enter the following details:
    Settings --> Advanced... (enter 456 as PIN) --> Admin Settings --> Network configuration --> Prov. Server -->
    1. Server Type: TFTP
    2. Server Address: http://<ip-address-pbx>/prov/polycom
    3. Server User: ftp
    4. Server Password: ftp
  3. Enter the WebUI of the SoundStation IP 7000 and go to
    Settings --> Provisioning Server
    and enter the same settings as shown under (2.)

Example screenshot from IP7000 WebUI

 

  • No labels