Due to JIRA upgrade, may be problems logging in to Confluence on 31st January 2022 from 8am to 9pm CEST,
In case of any questions please don't hesitate to contact helpdesk@gigaset-devnet.pl

Page tree
Skip to end of metadata
Go to start of metadata

VoIP Unlimited

Feature                                                           
Outgoing CallsYes
Incoming CallsYes
CLIP incomingYes
CLIP outgoingYes
Call ForwardingYes1
Call TransferYes
Call WaitingYes
DTMFYes
Anonymous Call

No2

A-number forwarding-

1 - Call forwarding through system only, redirects via 302 are not supported by VoIP Unlimited

2 - Anonymous call is not supported, alternatively precede the number dialled with 141 and VoIP unlimited will withhold for you.

 

VoIP Unlimited provides services to small and medium businesses in partnership with ICT solution providers, system integrators, traditional telephony dealers, and others who supply VoIP services as part of their offering to customers. Our services include SIP trunks, broadband circuits, wideband Ethernet, and MPLS networks. We also provide CPS, WLR, and T38 compatible FoIP (Fax over IP).

 

 

 

 

Gigaset Hybird settings.

When configuring a SIP trunk into the Hybird you must complete the following settings:

  1. Assistants/PBX/Trunks

 

Assistants/PBX/Trunks

1 - Create a New trunk

2 - Connection Type = SIP Provider (DDI)

 

3 -  Sip Provider Settings

Name = Info only

Authentication ID = SIP-ID given to you from VoIP Unlimited

Password = Password given to you from VoIP Unlimited

Registrar = sip.voip-unlimited.net

 

 

 

4 - Trunk Numbers

Insert the range mius the last x digits.

For example if your rage is 555500 to 555599,

Extensions = 10 to 20

Make the base number as 5555

555510 to 555520 will route direct to extensions, all other numbers would need to be added to P-P DDI Exception (see below)

 

5 - Class of Service - Select a COS

 

Advanced Settings

6 - Registrar Port

7 - Transport Prpotocol

8 - STUN server

If required : stun.voip-unlimited.net

Port = 10000

9 - P-P DDI Exceptions

Add the any DDI's not going to extensions with the same number.

Just the last digits from the range, in the example above any DDI  00 to 99.

 

 

 

  • No labels