Page tree
Skip to end of metadata
Go to start of metadata
Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Network - IP
NET.General.DeviceNameInNetwork

a-z, A-Z, 0-9, -
NET.LAN.IP.DHCP.Enabled01

0 = IP address type Static

1 = IP address type Dynamic (Default)

NET.IP.IPv4.Address


NET.IP.IPv4.SubnetMask


NET.IP.IPv4.StandardGateway


NET.IP.IPv4.PreferredDNSServer


NET.IP.IPv4.AlternateDNSServer


Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Network - LAN
NET.HTTP.ProxyServer.Active01

0 = Enable proxy server No (Default)

1 = Enable proxy server Yes

NET.HTTP.ProxyServer.Address


NET.HTTP.ProxyServer.Port0655350 (Default)
NET.VLAN.Tagging02

0 (Default) = off
1 = LAN
2 = LAN + PC 

NET.VLAN.LAN.Identifier


NET.VLAN.LAN.Priority07
NET.VLAN.PC.Identifier


NET.VLAN.PC.Priority07
NET.QoS.RTP.DSCP06446 (Default)
NET.QoS.SIP.DSCP06434 (Default)
NET.LLDP.Active011 (Default)
NET.LLDP.PacketInterval1360060 (Default)
Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Telephony - VoIP
SIP.TransportProtocol12

1 = UDP (Default)

2 = TCP

SIP.Port165535
SIP.Timers.T109999
SIP.Timers.Session909999
SIP.Timers.FailedRegistration09999
SIP.Timers.Subscription09999
SIP.Timers.FailedSubscription099990 = Disabled
300 = Default 
SIP.PRACK01
SIP.DisplayDiversionInfo.enable010 = Do not show the Diversion Info
1 (Default) = Show the Diversion Info
SIP.RTP.Port1655355004 (Default)
SIP.RTP.UseRandomPorts010 = Do not use random RTP ports
1 = Use random port from range <RTP.Port> - <RTP.Port+50> for RTP stream
SIP.RTP.UseSymmetricPorts01
SIP.RTP.UseRTCP01
SIP.Security.SRTP01
SIP.Security.AcceptNonSRTPCalls01
SIP.Security.UseSIPS02

0 => TLS is disabled

1 => TLS is enabled, SIP scheme enabled

2 => TLS is enabled, SIPS scheme enabled

Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Telephony - Connections
SIP.DefaultAccount03
SIP.Accounts.Failover01

0 = Do not use failover (default)
1 = Use failover

SIP.Account.0-3.AccountName


SIP.Account.0-3.Active

0 = Inactive

1 = Active

SIP.Account.0-3.Provider


SIP.Account.0-3.AuthName


SIP.Account.0-3.AuthPassword


SIP.Account.0-3.DisplayName


SIP.Account.0-3.Username


SIP.Account.0-3.Domain


SIP.Account.0-3.ProxyServer.Address


SIP.Account.0-3.ProxyServer.Port165535
SIP.Account.0-3.RegistrationServer.Address


SIP.Account.0-3.RegistrationServer.Port165535
SIP.Account.0-3.RegistrationServer.RefreshTimer09999
SIP.Account.0-3.DNSQuery01

0 = A

1 = A + SRV 

SIP.Account.0-3.FailoverServer.Enabled01
SIP.Account.0-3.FailoverServer.Address


SIP.Account.0-3.FailoverServer.Port


SIP.Account.0-3.STUN.Enabled


SIP.Account.0-3.STUN.Address


SIP.Account.0-3.STUN.Port165535
SIP.Account.0-3.STUN.RefreshTimer09999
SIP.Account.0-3.STUN.NATRefreshTimer09999
SIP.Account.0-3.ICE01
SIP.Account.0-3.OutboundProxy.Mode02

0 = Always
1 = Auto
2 = Never 

SIP.Account.0-3.OutboundProxy.Address


SIP.Account.0-3.OutboundProxy.Port165535
SIP.Account.0-3.DTMFTransmission05

0 = Audio
1 = RFC 4733
2 = Audio + RFC 4733
3 = SIP info
4 = RFC 4733 + SIP info
5 = Audio + RFC 4733 + SIP info 

IP.Account.0-3.AutoNegOfDTMFTransmission01

0 = Automatic DTMF transmission disabled
1 = Automatic DTMF transmission enabled

SIP.Account.0-3.AllowRouteHeaders01

0 = Switch off
1 = Switch on 

SIP.Account.0-3.CLIPSource02

0 = FROM
1 = PPI + FROM
2 = PAI + PPI + FROM
3 = RPID +FROM

Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Telephony - Audio
SIP.VoiceQuality02

0 = Optimized for high bandwidth
1 = Optimized for low bandwidth
2 = Own codec preference

You need to use "2" Own codec preference to set available and active codecs.

SIP.ActiveCodecs

The codecs are sperated with a "," Example <param name="SIP.ActiveCodecs" value="8,9,0" />
0 = uLaw

8 = aLaw
9 = g.722
18 = G.729

109 = iLBC
115 = g.726-32 
SIP.RTP.Duration2030

20 ms

30 ms

SIP.G729.AnnexB010 = Do not use Annex B (default)
1 = use Annex B 
Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Telephony - Phone System
Telephony.PhoneSystem.Type05

0 = Standard (Default)
1 = Gigaset T640/T440
3 = Hybird 120 GE
4 = Starface
5 = Broadsoft (V2.11.x needed)
6 = Teles (2.21.x needed)
11 = Vodafone

Web-interface: Settings - Telephony - BLF
Telephony.PhoneSystem.BLFURL

Broadsoft BLF URL
Telephony.PhoneSystem.Broadsoft.BLF.AutomaticFKFilling.Enabled010 = Manual Broadsoft BLF creation
1 = Automatic Broadsoft BLF creation
Telephony.PhoneSystem.Broadsoft.BLF.CallPickupCode

Broadsoft Call Pick up Feature code via blinking BLF key
Web-interface: Settings - Telephony - Broadsoft services
Telephony.PhoneSystem.XSI.Server

XSI Server URL
Telephony.PhoneSystem.XSI.SIPAuthentication010 = XSI username and Password
1 = SIP authentication
Telephony.PhoneSystem.XSI.AuthName

XSI Username
Telephony.PhoneSystem.XSI.AuthPassword

XSI Password
Telephony.PhoneSystem.XSI.SearchAnywhereInName.Enabled

0 = Disabled
1 = Enabled
Web-interface: Settings - Telephony - Personal
Telephony.PhoneSystem.XSI.PersonalDirectory.Enabled010 = Disabled
1 = Enabled
Telephony.PhoneSystem.XSI.PersonalDirectory.Name

Name of the personal Directory
Web-interface: Settings - Telephony - Group
Telephony.PhoneSystem.XSI.GroupDirectory.Enabled010 = Disabled
1 = Enabled
Telephony.PhoneSystem.XSI.GroupDirectory.Name

Name of the Group Directory
Web-interface: Settings - Telephony - Group Common
Telephony.PhoneSystem.XSI.GroupCommonDirectory.Enabled010 = Disabled
1 = Enabled
Telephony.PhoneSystem.XSI.GroupCommonDirectory.Name

Name of the Group Common Directory
Web-interface: Settings - Telephony - Enterprise
Telephony.PhoneSystem.XSI.EnterpriseDirectory.Enabled010 = Disabled
1 = Enabled
Telephony.PhoneSystem.XSI.EnterpriseDirectory.Name

Name of the Enterprise Directory
Web-interface: Settings - Telephony - Enterprise Common
Telephony.PhoneSystem.XSI.EnterpriseCommonDirectory.Enabled010 = Disabled
1 = Enabled
Telephony.PhoneSystem.XSI.EnterpriseCommonDirectory.Name

Name of the Enterprise Common Directory
Web-interface: Settings - Telephony - Call log
Telephony.PhoneSystem.XSI.CallLogType010 = Basic Call log
1 = Enhanced Call log
Web-interface: Settings - Telephony - Automatic Call Distribution (ACD)
Telephony.PhoneSystem.Broadsoft.ACD.Enabled01

0 = ACD Disabled
1 = ACD Enabled

Telephony.PhoneSystem.Broadsoft.ACD.Status010 = Agent un-available after login
1= Agent available after login
Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Telephony - Call Settings
Telephony.CallTransfer.AutoDetermineAddress

Enabled

Disabled

Telephony.CallTransfer.SemiAttendedTransferType01

0 = Early attended 

1 = Semi-attended

Telephony.CallTransfer.HoldOnTransfer.Attended

Enabled
Disabled

Telephony.CallTransfer.HoldOnTransfer.Unattended

Enabled
Disabled

Telephony.CallTransfer.DeriveTargetAddress

sipurl, sipcontact
Telephony.AccessCode.Code


Telephony.AccessCode.Enabled


Telephony.AccessCode.For05

0 = Outgoing calls list (Default)
1 = Incoming calls list
2 = LDAP
3 = Local directory
4 = Public net directory
5 = Dial editor

Telephony.AccessCode.InternalNumberLength09Set the length for internal numbers
Telephony.AreaCodes.Country

Other,ALB,ARG,AUS,AUT,BHR,BLR,BEL,BOL,BIH,BRA,BGR,CAN,CHL,
CHN,COL,CRI,HRV,CYP,CZE,DNK,ECU,EGY,EST,FIN,FRA,DEU,GRC,HKG,
HUN,ISL,IND,IDN,IRN,IRL,ISR,ITA,JPN,JOR,KWT,LVA,LBN,LIE,LTU,LUX,
MKD,MYS,MEX,MNE,MAR,NAM,NLD,NZL,NOR,PAK,PSE,PAN,PRY,PER,
PHL,POL,PRT,PRI,ROU,RUS,SAU,SRB,SGP,SVK,SVN,ZAF,KOR,ESP,SWE,
CHE,TWN,THA,TUR,ARE,GBR,USA,URY,VEN,VNM
Telephony.AreaCodes.Int.Prefix


Telephony.AreaCodes.Int.Code


Telephony.AreaCodes.Local.Prefix


Telephony.AreaCodes.Local.Code


Telephony.ToneScheme

INT,AUT,CAN,CZE,DNK,EGY,FIN,FRA,DEU,GRC,NLD,POL,PRT,ROU,
ZAF,RUS,SAU,SVK,ESP,SWE,CHE,ARE,GBR,USA,ITA
SIP.Account.0-3.CallWaiting01
SIP.Account.0-3.CallWaitingSignal

Off

SingleBeep

BeepEvery4

BeepEvery10

BeepEvery20

WebUI.CallSettings.CallWaiting.Disable

Hide Call waiting in Web-UI
SIP.Account.0-3.CountMissedAcceptedCalls01

0 = Missed calls disabled
1 = Missed call enabled (default)

Telephony.Speechpath.CallsViaCallManager02

0 = No

1 = Headset

2 = Handsfree

Telephony.Speechpath.IncCallsWithoutCallManager02

0 = No

1 = Headset

2 = Handsfree

Telephony.Speechpath.OutCallsViaFunctionKey12

1 = Headset

2 = Handsfree

Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Telephony - Call Divert
Telephony.CallDivert.0-3.All.Active010 (Default)
Telephony.CallDivert.0-3.All.VoiceMail011 (Default)
Telephony.CallDivert.0-3.All.Target

Phonenumber where all calls are diverted to.

Telephony.CallDivert.0-3.All.VoiceMail should be set to 0 to use this feature.

Telephony.CallDivert.0-3.Busy.Active010 (Default)
Telephony.CallDivert.0-3.Busy.VoiceMail011 (Default)
Telephony.CallDivert.0-3.Busy.Target

Phonenumber where all calls are diverted to when device is busy.

Telephony.CallDivert.0-3.Busy.VoiceMail should be set to 0 to use this feature.

Telephony.CallDivert.0-3.NoAnswer.Active010 (Default)
Telephony.CallDivert.0-3.NoAnswer.Delay

5,10,15,20,25,30,45,60,90,120 (Default)
Telephony.CallDivert.0-3.NoAnswer.VoiceMail01

1 (Default)

Telephony.CallDivert.0-3.NoAnswer.Target

Phonenumber where all not answered calls are diverted to.

Telephony.CallDivert.0-3.Busy.VoiceMail should be set to 0 to use this feature.

WebUI.CallDivert.Disable

Hide Call Divert from Web-UI
Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Telephony - Do not Disturb
Telephony.DnD.Active01
Telephony.DnD.List.Active01
Telephony.DnD.List.0-49.Name


Telephony.DnD.List.049.Number


Telephony.DnD.AnonymousCallBlock01
Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Telephony - Dialing Plans
Telephony.DiallingPlans.List.0-19.Number


Telephony.DiallingPlans.List.0-19.UseAreaCode01
Telephony.DiallingPlans.List.0-19.Connection04
Telephony.DiallingPlans.List.0-19.Comment


Telephony.DiallingPlans.List.0-19.Active01
Telephony.CallBarring.List.0-19.Number


Telephony.CallBarring.List.0-19.Comment


Telephony.CallBarring.List.0-19.Blocked01
Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Telephony - Voicemail
SIP.Account.0-3.VoiceMail.Active01
SIP.Account.0-3.VoiceMail.Mailbox


Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Online Directories - Corporate
NetDir.LDAP.0.DirectoryName


NetDir.LDAP.0.Enable

0 = Disabled
1 = Enabled 

NetDir.LDAP.0.Server.Address


NetDir.LDAP.0.Server.Port165535
NetDir.LDAP.0.BaseDN


NetDir.LDAP.0.Username


NetDir.LDAP.0.Password


NetDir.LDAP.0.Security

0 = Off
1 = TLS start
2 = LDAPs

NetDir.LDAP.0.NameFilter


NetDir.LDAP.0.NumberFilter


NetDir.LDAP.0.DisplayFormat


NetDir.LDAP.0.MaxNumberOfSearchResults11000
NetDir.LDAP.0.FirstName


NetDir.LDAP.0.Surname


NetDir.LDAP.0.PhoneHome


NetDir.LDAP.0.PhoneOffice


NetDir.LDAP.0.PhoneMobile


NetDir.LDAP.0.Email


NetDir.LDAP.0.Fax


NetDir.LDAP.0.Company


NetDir.LDAP.0.Street


NetDir.LDAP.0.City


NetDir.LDAP.0.ZIP


NetDir.LDAP.0.Country


NetDir.LDAP.0.AdditionalAttribute


NetDir.LDAP.0.AdditionalAttributeDialable

Yes

No

Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Online Directories - XML
NetDir.Xml.0.DirectoryName


NetDir.Xml.0.ServerAddress


NetDir.Xml.0.Username


NetDir.Xml.0.Password


NetDir.Xml.0.EnablePrivateDirectory


NetDir.Xml.0.PrivateDirectoryName


NetDir.Xml.0.EnableWhiteDirectory


NetDir.Xml.0.WhiteDirectoryName


NetDir.Xml.0.EnableYellowDirectory


NetDir.Xml.0.YellowDirectoryName


NetDir.Xml.0.NumberFilter

bp
NetDir.Xml.0.ProviderName


Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Online Services - Doorstation
NetSrv.DoorStations.0-19.Name


NetSrv.DoorStations.0-19.SIPID


NetSrv.DoorStations.0-19.DTMFCode


NetSrv.DoorStations.0-19.Username


NetSrv.DoorStations.0-19.Password


NetSrv.DoorStations.0-19.CameraURL

This parameter is ignored by Maxwell 2
NetSrv.DoorStations.0-19.PictureRefreshTime

Time in msec, see below for the allowed values.

500 = 2 fps
200 = 5 fps
100 = 10 fps
67 = 15 fps

This parameter is ignored by Maxwell 2

Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Desk Phone - Main Menu
System.MainMenu.Content

Standard (Default)
User defined

Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Desk Phone - Ringtones
SIP.DefaultRingtone

For values, see list below.
SIP.Account.0-3.Ringtone.External

06_Gigaset.mp3 (or .wav)

Attention: Full-path will be optional from version 2.19.x. Then the filename will be sufficient to set the ringtone. Until version 2.18.4 the full path is still necessary.

 List with Ringtones
Name in UI/Web-UI
Filename
From software 2.24.12
0101.wav01.mp3 (or .wav)
02_Memo02_Memo.wav02_Memo.mp3 (or .wav)
03_Vibe03_Vibe.wav03_Vibe.mp3 (or .wav)
04_Listen04_Listen.wav04_Listen.mp3 (or .wav)
05_Down05_Down.wav05_Down.mp3 (or .wav)
06_Gigaset06_Gigaset.wav06_Gigaset.mp3 (or .wav)
07_Egg07_Egg.wav07_Egg.mp3 (or .wav)
08_Peak08_Peak.wav08_Peak.mp3 (or .wav)
09_Step09_Step 3.wav09_Step 3.mp3 (or .wav)
10_P Cut10_P Cut.wav10_P Cut.mp3 (or .wav)
11_Set11_Set.wav11_Set.mp3 (or .wav)
12_Sim12_Sim.wav12_Sim.mp3 (or .wav)
13_Tone one13_Tone one.wav13_Tone one.mp3 (or .wav)
14_Dunken14_Dunken.wav14_Dunken.mp3 (or .wav)
15_Piano15_Piano.wav15_Piano.mp3 (or .wav)
16_Officebuffer16_Officebuffer.wav16_Officebuffer.mp3 (or .wav)
17_Twelve17_Twelve.wav17_Twelve.mp3 (or .wav)
18_Flightzone18_Flightzone.wav18_Flightzone.mp3 (or .wav)
19_Waste19_Waste.wav19_Waste.mp3 (or .wav)
20_Smototh G20_Smooth_G.wav20_Smooth_G.mp3 (or .wav)
21_Green Tea21_Green Tea.wav21_Green Tea.mp3 (or .wav)
22_Evolve 122_Evolve 1.oggEvolve 1.ogg
23_Evolve 223_Evolve 2.oggEvolve 2.ogg
Bellcore 1bellcore_dr1.oggbellcore_dr1.ogg
Bellcore 2bellcore_dr2.oggbellcore_dr2.ogg
Bellcore 3bellcore_dr3.oggbellcore_dr3.ogg
Bellcore 4bellcore_dr4.oggbellcore_dr4.ogg
Bellcore 5bellcore_dr5.oggbellcore_dr5.ogg
SIP.Account.0-3.Ringtone.HeaderExternal

<http://www.notused.com>;info=alert-external
SIP.Account.0-3.Ringtone.Internal

See: SIP.Account.0-3.Ringtone.External
SIP.Account.0-3.Ringtone.HeaderInternal

<http://www.notused.com>;info=alert-internal
SIP.Account.0-3.Ringtone.Group

See: SIP.Account.0-3.Ringtone.External
SIP.Account.0-3.Ringtone.HeaderGroup

<http://www.notused.com>;info=alert-group
SIP.Account.0-3.Ringtone.Doorstation

See: SIP.Account.0-3.Ringtone.External
SIP.Account.0-3.Ringtone.HeaderDoorstation 

<http://www.notused.com>;info=alert-door
SIP.Account.0-3.Ringtone.HeaderOptional


Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Desk Phone - Display
PhoneUI.Settings.Language

en-us (Default)

 Complete list

de-de

fr-fr

es-es

it-it

nl-nl

tr-tr

pt-pt

el-gr

da-dk

sv-se

no-no

cs-cz

pl-pl

sl-sl

ro-ro

ru-ru

PhoneUI.Settings.ScreenSaverTimeout0600,10,20 (Default),30,40,50,60
PhoneUI.Settings.ColorScheme.Tree03

(Maxwell 3):
0 - White on Black (see main screen then)
1 - White on Blue (see main screen then)
2 - White on Red (see main screen then)
3 - White on Green (see main screen then)

This parameter is ignored by Maxwell 2

PhoneUI.Settings.ColorScheme.Basic45

(Maxwell Basic):
4 - White on Black (see main screen then)
5 - Black on White (see main screen then)

PhoneUI.Settings.Backlight197 (Default)
PhoneUI.Settings.Contrast195 (Default)
PhoneUI.Settings.BacklightTimeout11205 (Default): Value is in minutes
Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Desk Phone - Pictures (Only Maxwell 3)
PhoneUI.Settings.ScreenSaverTimeout0600,10,20 (Default),30,40,50,60
PhoneUI.Settings.ScreenSaverSelection03

0 = Analog clock

1 = Digital clock

2 = Pictures

3 = HTTP source

Maxwell 2 only supports values 0 and 1

PhoneUI.Settings.ScreenSaverHTTPSource

This parameter is ignored by Maxwell 2
Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Desk Phone - Message Notification
Telephony.VoiceMail.VoicemailMessages.Active011 (Default)
Calls.Missed.Notification.Active011 (Default)
PhoneUI.SIP.ShowSIPMessagesOnDisplay011 (Default)
PhoneUI.SIP.ClearSIPMessageWithBackKey011 (Default)
Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Desk Phone - Keys and LEDs
PhoneUI.Keys.ProgrammableKeys.Directory.Type011

1 = LDAP
3 = XML white pages
4 = Local directory
5 = XML yellow pages
6 = XML Private directory
7 = XSI Personal
8 = XSI Group
9 = XSI Group Common
10 =XSI Enterprise 
11 = XSI Enterprise Common

PhoneUI.Keys.ProgrammableKeys.Messages.Type02

0 = Default

1 = FAC

2 = Action URL

PhoneUI.Keys.ProgrammableKeys.Messages.FAC.enable


PhoneUI.Keys.ProgrammableKeys.Messages.FAC.disable


PhoneUI.Keys.ProgrammableKeys.Messages.ActionURL.enable


PhoneUI.Keys.ProgrammableKeys.Messages.ActionURL.disable


PhoneUI.Keys.ProgrammableKeys.DND.Type02

0 = Default

1 = FAC

2 = Action URL

PhoneUI.Keys.ProgrammableKeys.DND.FAC.enable


PhoneUI.Keys.ProgrammableKeys.DND.FAC.disable


PhoneUI.Keys.ProgrammableKeys.DND.ActionURL.enable


PhoneUI.Keys.ProgrammableKeys.DND.ActionURL.disable


PhoneUI.Keys.ProgrammableKeys.Hold.Type02

0 = Default

1 = DTMF code

2 = Action URL

PhoneUI.Keys.ProgrammableKeys.Hold.DTMFCode


PhoneUI.Keys.ProgrammableKeys.Hold.ActionURL


PhoneUI.Keys.ProgrammableKeys.Conference.Type03

0 = Default

1 = DTMF code

2 = Action URL

3= FAC

PhoneUI.Keys.ProgrammableKeys.Conference.DTMFCode


PhoneUI.Keys.ProgrammableKeys.Conference.ActionURL


PhoneUI.Keys.ProgrammableKeys.Conference.FAC


PhoneUI.Keys.SoftKeys.X.Type

X=0 Left SoftKey, X=1 Right Softkey

-118

-1 = No function
3 = Quick Dial
5 = SIP URL
8 = Action URL
9 = SIP INFO
10 = FAC
11 = Call Waiting
12 = Local Directory
13 = Ldap Directory
14 = Xml Public
15 = Xml Yellow
16 = Xml Private
17 = Redial
18 = Select Line

PhoneUI.Keys.SoftKeys.X.Action

X=0 Left SoftKey, X=1 Right Softkey



Only Valid for:

  • SIP INFO

PhoneUI.Keys.SoftKeys.X.Connection

X=0 Left SoftKey, X=1 Right Softkey



Only Valid for:

  • Quick Dial

PhoneUI.Keys.SoftKeys.X.DisableCode

X=0 Left SoftKey, X=1 Right Softkey



Only Valid for:

  • FAC

PhoneUI.Keys.SoftKeys.X.DisableName

X=0 Left SoftKey, X=1 Right Softkey



Only Valid for:
  • SIP INFO
  • FAC

PhoneUI.Keys.SoftKeys.X.EnableCode

X=0 Left SoftKey, X=1 Right Softkey



Only Valid for:

  • FAC

PhoneUI.Keys.SoftKeys.X.EnableName

X=0 Left SoftKey, X=1 Right Softkey



Only Valid for:

  • Quick Dial
  • SIP URI
  • Action URL
  • SIP INFO
  • FAC

PhoneUI.Keys.SoftKeys.X.PhoneNumber

X=0 Left SoftKey, X=1 Right Softkey



Only Valid for:

  • Quick Dial

PhoneUI.Keys.SoftKeys.X.URL

X=0 Left SoftKey, X=1 Right Softkey



Only Valid for:
  • SIP URI
  • Action URL
Parameter nameValue:minValue:maxValue: allowed
Quick Dial Keys


PhoneUI.Keys.QuickDialKeys.X.Type
x = 1,2,3,4 
03

0 - Default
1 - QuickDial
2 - FAC
3 - ActionURL

PhoneUI.Keys.QuickDialKeys.X.Number
x = 1,2,3,4 
030 - Default
1 - QuickDial
2 - FAC
3 - ActionURL

PhoneUI.Keys.QuickDialKeys.X.FAC
x = 1,2,3,4 

030 - Default
1 - QuickDial
2 - FAC
3 - ActionURL
PhoneUI.Keys.QuickDialKeys.X.ActionURL
x = 1,2,3,4 
030 - Default
1 - QuickDial
2 - FAC
3 - ActionURL
Parameter nameValue:minValue:maxValue: allowed
Function keys (Only maxwell 3)


PhoneUI.Keys.FunctionKeys.X.Type

Maxwell 2 and 3: X = (Function key) 0 - 7

Expansion module 1 level 1: X = (Function key) 8 - 36
Expansion module 1 level 2: X = (Function key) 37 - 65

Expansion module 2 level 1: X = (Function key) 66 - 94
Expansion module 2 level 2: X = (Function key) 95 - 123

Expansion module 3 level 1: X = (Function key) 124 - 152
Expansion module 3 level 2: X = (Function key) 153 - 181

-110

-1 (No Function)

0 (Line, not for Expansion module)

1 (Shared Line, not for Expansion module)

2 (Park + Retrieve, not for Expansion module)

3 (Quick Dial)

4 (BLF)

5 (SIP URI)

6 (Call Divert, not for Expansion module)

7 (DTMF)

8 (Action URL)

9 (SIP INFO)

10 (FAC)

PhoneUI.Keys.FunctionKeys.X.DisplayName

Maxwell 2 and 3: X = (Function key) 0 - 7

02560-9, a-z, A-Z, *, @ , etc.

PhoneUI.Keys.FunctionKeys.X.Connection

Maxwell 2 and 3: X = (Function key) 0 - 7

03

SIP account 0 (1) - 3 (4)

Valid for:

  • Line
  • Shared Line
  • Park and Retrieve
  • Quick Dial
  • BLF
  • Call Divert
  • SIP Info

PhoneUI.Keys.FunctionKeys.X.PhoneNumber

Maxwell 2 and 3: X = (Function key) 0 - 7



Valid for:

  • Park and Retrieve
  • Quick Dial
  • BLF
  • Call Divert

PhoneUI.Keys.FunctionKeys.X.CallPickupCode

Maxwell 2 and 3: X = (Function key) 0 - 7



Valid for:

  • BLF

PhoneUI.Keys.FunctionKeys.X.URL

Maxwell 2 and 3: X = (Function key) 0 - 7



Valid for:

  • SIP URI
  • Action URI

PhoneUI.Keys.FunctionKeys.X.CallDivertType

Maxwell 2 and 3: X = (Function key) 0 - 7



Valid for:

  • Call Divert

PhoneUI.Keys.FunctionKeys.X.EnableCode

Maxwell 2 and 3: X = (Function key) 0 - 7



Valid for:

  • DTMF
  • FAC

PhoneUI.Keys.FunctionKeys.X.DisableCode

Maxwell 2 and 3: X = (Function key) 0 - 7



Valid for:

  • FAC

PhoneUI.Keys.FunctionKeys.X.DTMFCode

Maxwell 2 and 3: X = (Function key) 0 - 7


0-9,*,#

Available in Maxwell 3
Valid for:

  • DTMF

PhoneUI.Keys.FunctionKeys.X.Action

Maxwell 2 and 3: X = (Function key) 0 - 7



Valid for:

  • SIP INFO

PhoneUI.Keys.FunctionKeys.X.Color

Maxwell 2 and 3: X = (Function key) 0 - 7

02

"0" -> Red
"1" -> Green
"2" -> Yellow
"3" -> Standard

This parameter is ignored by Maxwell 2 for the main-device keys.

Only expansion module keys can be used with multi-color.

Function keys for expansion module see here


Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Desk Phone - Events
System.Events.RegistrationSuccessed


System.Events.RegistrationFailed


System.Events.ConnectionEstablished


System.Events.ConnectionTerminated


System.Events.OffHook


System.Events.OnHook


System.Events.IncomingCall


System.Events.OutgoingCall


Web-interface: Settings - Desk Phone - Local Phonebook See wiki article
System.LocalPhonebook.Url


System.LocalPhonebook.UpdateTime

08:00
Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Web Configurator
WebUI.AdminPassword


WebUI.UserPassword


WebUI.ShowPassword


WebUI.AllowAccessWeb010 = Allow access from a different subnet
1 = No access from different subnet (Default)
Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - System - Phone Web Server

HTTP.ConnectionType




HTTP (Default)

HTTPS

HTTP_HTTPS

HTTP.Port16553580 (Default)
HTTP.SecurePort165535443 (Default)
WebUI.LogoutTimer16010 (Default)
Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - System - Provisioning and Configuration

PhoneUI.Provisioning.ShowInProgressOnDisplay

(Parameter is not in web-interface)

01

0 = Do not show "Provisioning in Progress" on Display.

1 = Show "Provisioning in Progress" on Display. (Default)

System.Provision.ProvisioningServer

http://profile.gigaset.net/device/%DVID/ (Default)
FirmwareManagment.AutomaticCheckForUpdates01

0 = Automatic check for updates is "No"

1 = Automatic check for updates is "Yes"

System.Provision.Period

(Parameter is not in web-interface)

60086400

0 (Default) =  Random value between 1:00 and 4:00 am

Minimum time is 600 seconds.
If you configure the time <600 and > 0 then it can be that during manual testing provisioning, the
device will wait until the 600 seconds are passed and with the correct setting this
will not happen. 

Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - System - Security
System.Security.AcceptAllCertificates01

0 = Accept all certificates No (Default)

1 = Accept all certificates Yes

System.Security.HTTPAuthUsername


System.Security.HTTPAuthPassword


Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - System - Date and Time
System.DateAndTime.AutoAdjustTime
(Updated in the 2.22 software or higher)
NTPServiceDisabledNTPServiceEnabled

NTPServiceDisabled = Setting "Local" in web-interface, time is set manually.
NTPServiceEnabled = NTP server via provisioning, if not send then use DHCP option 42
NTPServiceManual = NTP server is entered manually via the web-interface.
NTPServiceDHCP = Use DHCP option 42, if not send then use NTP server via provisioning.

System.DateAndTime.TimeServer

pool.ntp.org (Default)
System.DateAndTime.TimeZone

GMT+1.Europe/Amsterdam


 Complete list

GMT-11.Pacific/Midway
GMT-10.Pacific/Honolulu
GMT-9.America/Anchorage
GMT-8.America/Los_Angeles
GMT-8.America/Tijuana
GMT-7.America/Phoenix
GMT-7.America/Chihuahua
GMT-7.America/Denver
GMT-6.America/Costa_Rica
GMT-6.America/Chicago
GMT-6.America/Mexico_City
GMT-6.America/Regina
GMT-5.America/Bogota
GMT-5.America/New_York
GMT-4.America/Barbados
GMT-4.America/Halifax
GMT-4.America/Manaus
GMT-3.America/Sao_Paulo
GMT-3.America/Argentina/Buenos_Aires
GMT-3.America/Godthab
GMT-3.America/Montevideo
GMT-3.America/Santiago
GMT-2.Atlantic/South_Georgia
GMT-1.Atlantic/Azores
GMT-1.Atlantic/Cape_Verde
GMT.Africa/Casablanca
GMT.Europe/London
GMT+1.Europe/Amsterdam
GMT+1.Europe/Belgrade
GMT+1.Europe/Brussels
GMT+1.Europe/Sarajevo
GMT+1.Africa/Brazzaville
GMT+1.Africa/Windhoek
GMT+2.Asia/Amman
GMT+2.Europe/Athens
GMT+2.Asia/Beirut
GMT+2.Africa/Cairo
GMT+2.Africa/Harare
GMT+2.Europe/Helsinki
GMT+2.Asia/Jerusalem
GMT+3.Asia/Baghdad
GMT+3.Asia/Kuwait
GMT+3.Europe/Minsk
GMT+3.Europe/Moscow
GMT+3.Africa/Nairobi
GMT+4.Asia/Baku
GMT+4.Asia/Dubai
GMT+4.Asia/Tbilisi
GMT+4.Asia/Yerevan
GMT+5.Asia/Karachi
GMT+5.Asia/Oral
GMT+5.Asia/Yekaterinburg
GMT+6.Asia/Almaty
GMT+7.Asia/Bangkok
GMT+7.Asia/Krasnoyarsk
GMT+8.Asia/Shanghai
GMT+8.Asia/Hong_Kong
GMT+8.Asia/Irkutsk
GMT+8.Asia/Kuala_Lumpur
GMT+8.Australia/Perth
GMT+8.Asia/Taipei
GMT+9.Asia/Seoul
GMT+9.Asia/Tokyo
GMT+9.Asia/Yakutsk
GMT+10.Australia/Brisbane
GMT+10.Pacific/Guam
GMT+10.Australia/Hobart
GMT+10.Asia/Magadan
GMT+10.Australia/Sydney
GMT+10.Asia/Vladivostok
GMT+12.Pacific/Auckland
GMT+12.Pacific/Fiji
GMT+12.Pacific/Majuro
GMT+13.Pacific/Tongatapu

System.DateAndTime.AutoAdjustClockForDSTAutomatedDaylightSavingDisabledAutomatedDaylightSavingEnabled

AutomatedDaylightSavingDisabled

AutomatedDaylightSavingEnabled

System.DateAndTime.TimeFormat

12h

24h (Default)

System.DateAndTime.DateOrder

dd.mm.yyyy (Default)

mm.dd.yyyy

Parameter nameValue:minValue:maxValue: allowed
Web-interface


WebUI.Language

en-us (Default)

 Complete list

de-de

fr-fr

es-es

it-it

nl-nl

tr-tr

pt-pt

el-gr

da-dk

sv-se

cs-cz

pl-pl

sl-sl

ro-ro

ru-ru

WebUI.ShowPIN01

0 = Show PIN No

1 = Show PIN Yes (Default)

PhoneUI.Security.PIN

1234 (Default)
Parameter nameValue:minValue:maxValue: allowed
Device settings not available via web-interface


Phone UI
PhoneUI.Settings.Volume110

5 (Default)

Menu - Settings - Audio - Ringtones -Volume

PhoneUI.Settings.Confirmations01

0 (Default)

Menu - Settings - Audio - Advisory Tones - Confirmations

PhoneUI.Settings.KeyClick01

0 (Default)

Menu - Settings - Audio - Advisory Tones - Key Click

PhoneUI.Settings.AnonymousCallSilencing01Menu - Settings - Audio - Ringtones - Anonymous Call Silencing
PhoneUI.Audio.ReceiverVolume1103 (Default)
PhoneUI.Audio.HeadsetVolume1103 (Default)
PhoneUI.Audio.HandsfreeVolume1103 (Default)
PhoneUI.SelectedServices.Disable01

0 = Show Selected Services menu in PhoneUI (Default)
1 = Hide Selected Servicesmenu in PhoneUI

PhoneUI.Keys.FunctionKeys.Icons010 = Do not show Function key icons
1 = Show Function key icons (Default) 
PhoneUI.ActiveRingbacks.Disable010 = Show Active Ringbacks menu item in PhoneUI (Default)
1 = Hide Active Ringbacks menu item in PhoneUI
PhoneUI.Audio.OneMelody.Doorstation


PhoneUI.Audio.OneMelody.External


PhoneUI.Audio.OneMelody.Group


PhoneUI.Audio.OneMelody.Internal


PhoneUI.Audio.OneMelody.Optional


PhoneUI.CallDivert.Disable010 = Show Call Divert menu item in PhoneUI (Default)
1 = Hide Call Divert menu in PhoneUI
PhoneUI.CallWaiting.Disable010 = Show Call Waiting menu item in PhoneUI (Default)
1 = Hide Call Waiting menu in PhoneUI
PhoneUI.Directory.Local.NameFirst


PhoneUI.Menu.Contacts.Visible010 = Hide Contacts menu in PhoneUI
1 = Show Contacts menu in PhoneUI (Default)
PhoneUI.WithholdNumber.Disable010 = Show Withhold Number menu item in PhoneUI (Default)
1 = Hide Withhold Number menu item in PhoneUI
WEB-UI
WebUI.CallSettings.CallWaiting.Disable01

0 = Show Call waiting menu in Web-UI (Default)
1 = Hide Call waiting in Web-UI

WebUI.CallDivert.Disable01

0 = Show Call Divert menu in Web-UI (Default)
1 = Hide Call Divert menu in Web-UI

Note: It will also enable/disable the function key Call Divert.

Others
PhoneUI.Settings.DistinctiveRinging01

1 (Default) = Show all ringtones in MMI and web-interface
0 = Hide the Distinctive ringtones (External, Internal, Group, Doorstation) in MMI and web-interface. Used when provider does not support Distinctive ringtone.

SIP.Checksync.Simple01

0 (default) = Device will not reboot automatic after check-sync.
If reboot=true is send then of course device will reboot
1 = Device will reboot automatic after check-sync. (same behavior as reboot=true is send)
If device will receive reboot=false then also reboot will happen.

Timer 1 only provisioning is done: Device will reboot 5 seconds after downloading provisioning file

Timer 2 also firmware update is started: Device will reboot 90 seconds after firmware file is downloaded.

(Device will not allow a reboot during these 90 seconds, it waits until the 90 seconds are passed)

Calls.Missed.Subscribe.Active01

0 = inactive - Subscribe for MWI is not send to server, MWI displayed correctly
1 = active (default) - Subscribe for MWI is send to server, MWI displayed correctly

SoftKeys.X.Active

X=0 Left SoftKey, X=1 Right Softkey

010 = When SoftKey is FAC then change to disabled
1 = When SoftKey is FAC then change to enabled
SIP.Account.(0-3).RegistrationServer.ReregisterAlternative010 (Default) = Disabled, SIP re-REGISTER 50% of the negotiated expire timer.
1 = Enabled, SIP re-REGISTER 75% of the negotiated expire timer.
System.Provision.MaxDownloadSpeedBps

Firmware update download speed limitation (Bytes per second), where 0 (zero) is no limitation.
  • No labels