Date: Thu, 28 Mar 2024 19:31:43 +0100 (CET) Message-ID: <1929844869.3235.1711650703883@teamwork> Subject: Exported From Confluence MIME-Version: 1.0 Content-Type: multipart/related; boundary="----=_Part_3234_1385001.1711650703882" ------=_Part_3234_1385001.1711650703882 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Content-Location: file:///C:/exported.html
Valid for: |
|
N670 |
|
|
|
|
From software 2.38 it is possible to upgrade an N670 to an N870 feature = level.
The table below describes the changes after upgrade.
Feature
N670 (No license installed)
N670 upgraded to N870 feature level
Max. number of DECT handsets
20
250
Max. number of additional Base stations
2
60
DECT base behind N670
Yes
No
DECT base behind N870
No
Yes
Behind Virtual Integrator as DECT manager
N670 DECT MANAGER LICENSE (S30852-H2714-X2)
Roaming between locations (DECT Managers) are not supported
Up to 300 (upgraded) N670 behind the Virtual Integrator
N870 DECT MANAGER LICENSE (S30852-= H2716-X2)
Roaming between locations (DECT ma= nagers) are supported
Up to 100 (upgraded) N670 behind t= he Virtual Integrator
Behind Embedded Integrator as DECT manager
N670 DECT MANAGER LICENSE (S30852-H2714-X2)
Roaming between locations (DECT Managers) are not supported
Up to 20 (upgraded) N670 behind the Embedded Integrator
N870 DECT MANAGER LICENSE (S30852-= H2716-X2)
Roaming between locations (DECT ma= nagers) are supported
Up to 20 (upgraded) N670 behind th= e Embedded Integrator
Device can have the following role:
User-agent
Gigaset N670 IP PRO/83.V2.43.0+build.5f0a106;7C2F80XXXXXX
Gigaset N670 IP PRO/83.V2.43.0+bui= ld.5f0a106;7C2F80XXXXXX=
When you order a license, you need to add the MAC-ID of the device as th= e license is based on the MAC address of the device.
MAC-ID of the N670
Copy the MAC-ID= from the STATUS page (12 digits MAC address + 4 digits)
If you need the MAC-ID of an N670 that has the role DECT base only, from= software 2.57.0 the DECT base web-interface (https://<IP_Addr>/dlsd-stats) shows the MAC-ID instead of th= e MAC address only.
The license can be activated:
In the N670 web-interface go to: System - Licensing
In case you need to remove this license you have to do it via the cli in= terface with "sudo reset2factory hard".