Date: Thu, 28 Mar 2024 15:00:00 +0100 (CET) Message-ID: <1206843507.1561.1711634400819@teamwork> Subject: Exported From Confluence MIME-Version: 1.0 Content-Type: multipart/related; boundary="----=_Part_1560_441568676.1711634400819" ------=_Part_1560_441568676.1711634400819 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Content-Location: file:///C:/exported.html
Dependent on the DX800 variant, it can be that the redirect server optio= n is disabled. This can only be enabled via special configuration, for this= you need a patch. The patch is based on the variant and contains the follo= wing settings to enable redirect server.
DX800 enable redirect
BS_IP_Data1.ucB_HAS_PROVISIONING_CODE=3D1
BS_IP_Data1.ucB_SHOW_PROVISIONING_CODE_IN_HS=3D1
BS_IP_Data1.ucB_AUTOPROVISIONING=3D0
BS_IP_Data1.ucI_AUTOPROVISIONING_STYLE=3D0
BS_IP_Data1.ucB_AUTO_UPDATE_PROFILE=3D1
BS_IP_Data3.ucI_ONESHOT_PROVISIONING_MODE_1=3D1
BS_IP_Data1.aucS_AUTOPROVISIONING_CODE=3D0x34,0x34,0x34
Via the restore option, you can activate the patch below. If you variant= is not listed you need to request this from Gigaset.
As most of the DX800 parameters are the same like N510, you can also use= the online tools for N510 to create config files.
Parameter-Name | possible Values | Web-UI | Where to find / Description |
---|---|---|---|
B_... - boolean expressed as 1/0. | |||
I_... - integer value in range +/-(2^15 - 1) | |||
S_... - string value, e.g. =E2=80=9CAla ma kota= =E2=80=9D (entered without quotation signs). | |||
Service-specific-data | |||
I_TDS_AUTHENTICATION_MODE | 0=3DROM data / 1=3DUSER data / 2=3DROM or USER d= ata / 3=3DSIP authentication mode | No | This parameter tells where HTTP auth login/passw= ord is stored. Value 3 is very usefull option. In this mode HTTP login and = password will be get from first SIP account data. |
B_TDS_TRANSMIT_MAC_ADDRESS | No | should mac address of device be included in ever= y request "bTDSTransmitMacAddress =3D 1". | |
S_TDS_ISO_3166_1 | Yes | WebUI-Country-code-for-Telephonebook-entry | |
S_TDS_TXT_AL_HEADER | |||
S_TDS_TXT_NAME | |||
S_AVAILABLE_OTDP | Yes | WebUI-Available-Telephonbooks-under-Services (de= fault:6B747467656E67736862736500FFFFFF) | |
S_TDS_MNEMONIC | Yes | WebUI-Active-Telephonebook-under-Services | |
S_TDS_SERVICE_URL | No | URL address of the phonebook server (must be end= ed with ?) | |
S_TDS_LOGIN | No | if phonebook server requires authentication (onl= y HTTP Digest MD5 is supported) | |
S_TDS_LOGIN_PASS | No | CRYPTED password (password can be generate by sw= -development) | |
I_TDS_CAPABILITIES | No | provider capabilities "aucTDSCapabilities". Capa=
bilities byte are combined from following bits: AEIP_OTDP_CAP_PEOPLE_SEARCH =3D 0x01, <-- white pages AEIP_OTDP_CAP_BUSINESS_SEARCH =3D 0x02, <-- yellow pages AEIP_OTDP_CAP_REVERSE_LOOKUP =3D 0x04, <-- search by phone numbe= r AEIP_OTDP_CAP_PRIVATE_NETWORK_DIRECTORY =3D 0x08, <-- 3rd book&n= bsp; type - private phonebook AEIP_OTDP_CAP_AUTO_LOOKUP =3D 0x10, <-- if reverse lookup is act= ive, all incoming calls will be looked inside netdir and caller name will b= e presented on display AEIP_OTDP_CAP_NICKNAME_FOR_PRIVATE_NETWORK_DIRECTORY =3D 0x20, <= -- private phonebook supports user defined firmware AEIP_OTDP_CAP_ENCRYPT_POSTS =3D 0x40, <-- private phonebook - al= l sent data will be encrypted |
|
S_TDS_TXT_MENU | No | Handset-Telephonebook-Search-Menue-Header | |
S_TDS_TXT_HEADER | No | Handset-Telephonebook-Search-Result-Header | |
S_TDS_TXT_SEARCH_1 | No | Handset-Telephonebook-Search-note-Line-1 | |
S_TDS_TXT_SEARCH_2 | No | Handset-Telephonebook-Search-note-Line-2 | |
S_TDS_TXT_DEP_MENU | No | Handset-Yellowpages-Search-Menue-Header | |
S_TDS_TXT_DEP_HEADER | No | Handset-Yellowpages-Search-Result-Header | |
S_TDS_TXT_DEP_SEARCH_1 | No | Handset-Yellowpages-Search-Note-Line-1 | |
S_TDS_TXT_DEP_SEARCH_2 | No | Handset-Yellowpages-Search-Note-Line-2 | |
S_OTDP_AUTH_PASS | No | ||
S_TDS_TXT_PTD_MENU | No | Handset-Private-Phonebook-Search-Menue-Header | |
S_TDS_TXT_PTD_HEADER | No | Handset-Private-Phonebook-Search-Result-Header= td> | |
S_TDS_TXT_PTD_SEARCH_1 | No | Handset-Private-Phonebook-Search-Note-Line-1 | |
S_TDS_TXT_PTD_SEARCH_2 | No | Handset-Private-Phonebook-Search-Note-Line-2 | |
S_OTDP_AUTH_NAME | No | ||
IP Configuration | |||
B_USE_DHCP | boolean true/false | Yes | Settings --> IP-configuration --> IP addre= ss type |
I_IP | Yes | Settings --> IP-configuration --> IP addre= ss | |
I_SUBNET_MASK | Yes | Settings --> IP-configuration --> Subnet m= ask | |
I_DEFAULT_ROUTER | Yes | Settings --> IP-configuration --> Default = gateway | |
I_DNS_SERVER_1 | Yes | Settings --> IP-configuration --> Preferre= d DNS server | |
I_DNS_SERVER_2 | Yes | Settings --> IP-configuration --> Alternat= e DNS server | |
B_ACCEPT_FOREIGN_SUBNET | boolean true/false | Yes | Settings --> IP-configuration --> Allow ac= cess from other networks |
B_HTTP_PROXY_ENABLED | Yes | Settings --> IP-configuration --> Enable p= roxy | |
S_HTTP_PROXY_URL | Yes | Settings --> IP-configuration --> Proxy se= rver address | |
I_HTTP_PROXY_PORT | Yes | Settings --> IP-configuration --> Proxy se= rver port | |
B_SHOW_QUESTION_MARK_IN_WEB | Yes | Question mark in the right-upper corner | |
B_SHOW_SECURITY_ADVICE | Yes | Security advice after login if password or simil= ar is not changed | |
I_HTTPLANGUAGE | Yes | Before login you can change the WebUI-language= td> | |
// enabled web languages | |||
B_WEB_LANGUAGE_ENABLED_ENG | Yes | Offered languages for the WebUI (at login!) | |
B_WEB_LANGUAGE_ENABLED_GER | Yes | Offered languages for the WebUI (at login!) | |
B_WEB_LANGUAGE_ENABLED_FRE | Yes | Offered languages for the WebUI (at login!) | |
B_WEB_LANGUAGE_ENABLED_ITA | Yes | Offered languages for the WebUI (at login!) | |
B_WEB_LANGUAGE_ENABLED_NDL | Yes | Offered languages for the WebUI (at login!) | |
B_WEB_LANGUAGE_ENABLED_ENGUS | Yes | Offered languages for the WebUI (at login!) | |
B_WEB_LANGUAGE_ENABLED_ARA | Yes | Offered languages for the WebUI (at login!) | |
B_WEB_LANGUAGE_ENABLED_RUS | Yes | Offered languages for the WebUI (at login!) | |
B_SIP_USE_STUN_SHC | Yes | Settings --> Telephony --> Connections --&= gt; Gigaset.net --> STUN enabled | |
Advanced VOIP settings | |||
B_DTMF_TX_MODE_AUTO | Yes | Settings --> Telephony --> Advanced Settin= gs --> Send settings | |
I_DTMF_TX_MODE_BITS | (BITS!) 1=3Daudio, 2=3DRFC 2833, 4=3DSIP INFO | Yes | Settings --> Telephony --> Advanced Settin= gs --> Send settings |
B_USE_R_KEY_FOR_CALL_TRANSFER | Yes | Settings --> Telephony --> Advanced Settin= gs --> Use R-Key to initiate call transfer with the SIP Refer method | |
B_CT_AFTER_ON_HOOK | Yes | Settings --> Telephony --> Advanced Settin= gs --> Transfer Call by On-Hook | |
B_USE_RANDOM_PORT | Yes | Settings --> Telephony --> Advanced Settin= gs --> Use random ports | |
I_SIP_LOCAL_PORT | Yes | Settings --> Telephony --> Advanced Settin= gs --> SIP port (min) | |
I_RTP_LOCAL_PORT | Yes | Settings --> Telephony --> Advanced Settin= gs --> RTP port (min) | |
I_SIP_LOCAL_PORT_MAX | Yes | Settings --> Telephony --> Advanced Settin= gs --> SIP port (max) | |
I_RTP_LOCAL_PORT_MAX | Yes | Settings --> Telephony --> Advanced Settin= gs --> RTP port (max) | |
B_VOIP_CALLWAITING_STATUS | Yes | ||
B_CTO_REFER_TO_PREFERRED_CONTACT | Yes | Settings --> Telephony --> Advanced Settin= gs --> Preferred Refer To | |
B_CTO_REFER_TO_AUTOMATIC | Yes | Settings --> Telephony --> Advanced Settin= gs --> Automatic Refer To | |
Audio settings | |||
B_ONLY_ONE_ACTIVE_VOIP_CALL | Yes | Settings --> Telephony --> Audio --> Al= low 1 VoIP Call only | |
I_SIP_PREDEFINED_VOCODER | Yes | ||
I_SIP_AVAILABLE_VOCODER | Yes | ||
Number assignment | |||
B_AUTOMATIC_FALLBACK_TO_PSTN | Yes | Settings --> Telephony --> Number Assignme= nt --> Automatic fallback to fixed line | |
B_ENHANCED_AUTOFALLBACK | Yes | Settings --> Telephony --> Number Assignme= nt --> Enhanced Auto-Fallback | |
S_PSTN_NAME | Yes | Settings --> Telephony --> Connections --&= gt; Fixed Line --> Connection Name or Number | |
Dialing plans | |||
I_DIALING_PLAN_COUNTRY_ID | Yes | Settings --> Telephony --> Dialling Plans = --> Country | |
S_CITY_CODE | Yes | Settings --> Telephony --> Dialling Plans = --> Local Area Code | |
B_USE_CITY_CODE | Yes | Settings --> Telephony --> Dialling Plans = --> Predial area code for local calls through VoIP | |
S_SIP_SHC_DISPLAYNAME | No | Handset!! --> Call gigaset.net --> Option= s --> Own details | |
B_SHC_CALLFORWARDING_STATUS_1 | Yes | Settings --> Telephony --> Call Forwarding= --> Gigaset.net | |
I_SHC_CALLFORWARDING_WHEN_1 | Yes | Settings --> Telephony --> Call Forwarding= --> Gigaset.net --> When | |
S_SHC_CALLFORWARDING_NUMBER_1 | Yes | Settings --> Telephony --> Call Forwarding= --> Gigaset.net --> Call number | |
B_SIP_SHC_ACCOUNT_IS_ACTIVE | No | Enable Gigaset.net account | |
S_EMAIL_SERVER | Yes | Settings --> Messaging --> E-Mail --> P= OP3 Server | |
S_EMAIL_USERNAME | Yes | Settings --> Messaging --> E-Mail --> A= uthentication Name | |
S_EMAIL_PASS | Yes | Settings --> Messaging --> E-Mail --> A= uthentication Password | |
I_EMAIL_POLL_TIME | Value in minutes | Yes | Settings --> Messaging --> E-Mail --> C= heck for new e-mail |
Info Services | |||
B_SHOW_INFO_SERVICE_SERVER_ADVICE | Yes | Settings --> Services --> Advice under "Ac= tivate Info Services" | |
B_INFO_SERVICE_ACTIVE | Yes | Settings --> Services --> Activate Info Se= rvices | |
S_INFO_SERVICE_URL | No | URL for the Info-Services-Server | |
Management Date & Time | |||
S_TIME_NTP_SERVER | Yes | Settings --> Management --> Date&Time = --> Time Server | |
B_TIME_USE_AUTOMATIC_NTP_SYN | Yes | Settings --> Management --> Date&Time = --> Automatic adjustment of System Time with time server | |
I_TIME_COUNTRY | Yes | Settings --> Management --> Date&Time = --> Country | |
I_TIME_TIMEZONE | Yes | Settings --> Management --> Date&Time = --> Time Zone | |
B_TIME_USE_AUTOMATIC_DST | Yes | Settings --> Management --> Date&Time = --> Automatically adjust clock to summer-time changes | |
B_HAS_NTP_SETTINGS | No | ||
Miscellaneous | |||
B_SHOW_VOIP_STATUS_ON_HANDSET | Yes | Settings --> Management --> Miscellaneous = --> Show VoIP status on handset | |
Firmware Update | |||
S_DATA_SERVER | Yes | URL for the gigaset.net-server | |
Provisioning-specific-data | |||
// TR-069 | |||
S_DEV_MGMT_SRVR_URL | No | ||
S_DEV_MGMT_SRVR_USER | No | ||
S_DEV_MGMT_SRVR_PW | No | ||
I_DEV_MGMT_SRVR_INF_EN | No | ||
I_DEV_MGMT_SRVR_INF_INTV_O | No | ||
S_DEV_MGMT_SRVR_PARKEY | No | ||
S_DEV_MGMT_SRVR_CONN_USER | No | ||
S_DEV_MGMT_SRVR_CONN_PW | No | ||
S_DEV_MGMT_SRVR_OUI | No | ||
S_DEV_PRODCLASS | No | ||
S_DEV_MGMT_SRVR_SERNUM | No | ||
B_TR069_SEND_TRANSF_COMPL | No | ||
S_TR069_COMMAND_KEY | No | ||
S_TR069_AES_KEY | No | ||
B_BOOTSTRAP_TRIGGER | No | ||
B_TR69_MGMT_ENABLED | No | ||
I_DEV_MGMT_SRVR_INF_INTV | No | ||
B_HAS_PROVISIONING_CODE | No | ||
B_SHOW_PROVISIONING_CODE_IN_HS | No | ||
B_DO_AUTOMATIC_UPDATES | Yes | General indication if a check for new FW / Profi= e will occur every night. | |
B_AUTO_UPDATE_FW | No | Indication if a new firmware will be stored dire= ctly, without user interaction and signalling via MWI (forced update). = ; | |
B_AUTO_UPDATE_PROFILE | No | Indication if a new Profile will be stored direc= tly, without user interaction and signalling via MWI (forced update). = | |
I_REMINDER_FW_UPDATE | No | Value in "x" days! If the value is greater than = 0, the customer will get a reminder via MWI again after "x" days. | |
I_REMINDER_PROFILE_UPDATE | No | Value in "x" days! If the value is greater than = 0, the customer will get a reminder via MWI again after "x" days. | |
S_USER_FIRMWARE_URL | No | ||
// Auto-Provisioning Codes/Modes | |||
S_AUTOPROVISIONING_CODE | Yes | Settings --> Telephony --> Account 1 -->= ; Auto Configuration Code | |
S_AUTOPROVISIONING_CODE_2 | Yes | Settings --> Telephony --> Account 2 -->= ; Auto Configuration Code | |
S_AUTOPROVISIONING_CODE_3 | Yes | Settings --> Telephony --> Account 3 -->= ; Auto Configuration Code | |
S_AUTOPROVISIONING_CODE_4 | Yes | Settings --> Telephony --> Account 4 -->= ; Auto Configuration Code | |
S_AUTOPROVISIONING_CODE_5 | Yes | Settings --> Telephony --> Account 5 -->= ; Auto Configuration Code | |
S_AUTOPROVISIONING_CODE_6 | Yes | Settings --> Telephony --> Account 6 -->= ; Auto Configuration Code | |
I_ONESHOT_PROVISIONING_MODE_1 | No | ||
I_ONESHOT_PROVISIONING_MODE_2 | No | ||
I_ONESHOT_PROVISIONING_MODE_3 | No | ||
I_ONESHOT_PROVISIONING_MODE_4 | No | ||
I_ONESHOT_PROVISIONING_MODE_5 | No | ||
I_ONESHOT_PROVISIONING_MODE_6 | No |