Date: Fri, 29 Mar 2024 08:13:07 +0100 (CET) Message-ID: <1739969947.3567.1711696387791@teamwork> Subject: Exported From Confluence MIME-Version: 1.0 Content-Type: multipart/related; boundary="----=_Part_3566_115635384.1711696387791" ------=_Part_3566_115635384.1711696387791 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Content-Location: file:///C:/exported.html
Valid for: |
|
N670 |
N870 |
N870E |
Embedded Integrator |
Virtual Integrator |
This page explains how to prepare an Multicell installation at different= sites to be added later to an Virtual Integrator without the need to regis= ter all handsets new. If you do not follow this procedure, you still can ad= d an Multicell installation to an Virtual Integrator but all handsets needs= to be registered manually again.
The first site we will use as master for the other sites.
You need to read the DECT PARI of the first site and use this for the ot= her sites.
The DECT PARI can be read from the Status page.
Before you register any DECT handset on the other sites, you first need = to configure the DECT PARI of these sites to be the same like the DECT PARI= of the Master site.
The DECT PARI can not be configured via the web-interface, this has to b= e done via provisioning.
Important !!!
Do not register any DECT handsets until the N870 multisite system has th= e same PARI as the master. Else you need to register all handset manually a= gain.
Auto-provisioning template
<?xml version=3D"1.0" enco=
ding=3D"UTF-8"?>
&=
lt;provisioning version=3D"1.1"=
productID=3D"e2">
<nvm>
<!--
PARI TEXT CHECK(length(PARI) <=3D 8), /* main DECT identity for the =
entire system */
-->
<param name=3D"DmGlobal.0.PARI" value=3D"1031360D" />
</nvm>
=
</provisioning>
Example:
On my second system the DECT PARI is:
On the second system you to the Provisioning page
"Browse" and select the xm= l file.
Click on Upload and Start auto configuration.
DECT PARI is now changed to the setting of the Master.
You can now register the DECT handsets.
How to Migrate an existing N870 multicell installation to an Virtual Int= egrator can be found here. FAQ - How to migrate an Multicell to an Virtual Integrator.<= /a>