Versions Compared

Old Version 8

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version 9

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Anchor
Bintecextend
Bintecextend
Extend an existing Bintec DECT system with:

  • Gigaset DECT base

    and/or

  • Gigaset PRO handset(s)


How to:

  1. Upgrade the Bintec DECT system with the firmware V2...59
  2. Extend the DECT system with a Gigaset device:
    1. Bintec DECT 160 with Gigaset N670 V2.59
    2. Bintec DECT 210 with Gigaset N870 V2.59
  3. Add new Gigaset PRO DECT handsets
    They The following handsets will be fully supported:
    1. R700H
    2. S700H
    3. SL800H
    4. R700H Protect


draw.io Diagram
bordertrue
diagramNameBintecExtendexisting
simpleViewerfalse
width
linksauto
tbstyletop
lboxtrue
diagramWidth890
revision3

New DECT installation behind a Bintec PBX system:

This solution provides the possibility to:

  • Install a Gigaset DECT behind an Bintec PBX
  • That is auto-provisioned by the Bintec PBX
  • With no license required in the Bintec system

How to:

  1. Install a standard Gigaset DECT N670/N870
  2. Upgrade the Gigaset DECT system with the firmware ...
  3. Upload this provisioning file ... via the DECT web-interface
  4. Reboot the DECT system
  5. The Gigaset DECT system can be installed like a normal Bintec DECT system

Remark:

  • Gigaset DECT handsets will have full functionality
  • Bintec DECT handsets will have GAP functionality (Make and receive calls)
  • You can not install Bintec DECT 160/210 as DECT base behind the Gigaset DECT
  • If you want to combine Gigaset DECT system with Bintec DECT system then the Bintec DECT should be installed as the "All-in-one" device with Gigaset devices as additional DECT base. See: The above article
draw.io DiagrambordertruediagramNameBintecNewDECTsimpleViewerfalsewidthlinksautotbstyletoplboxtruediagramWidth888revision4

Digitalisierungsbox Image Added

If you have the Digitalisierungsbox Smart 2, then the Gigaset N670 and N870 can be installed as DECT cordless system as replacement of the Bintec DECT 160 and DECT.

It will be auto-provisioned like the Bintec DECT 160/210.

  • Behind the Gigaset N670 or N870 you can not connect a Bintec DECT Device.
  • If you have Bintec and Gigaset DECT devices and you want to install it at the same customer. Install the Bintec as the all-in-one system and connect the Gigaset in the role DECT base. (Using software 2.59)
  • Bintec DECT handsets behind a Gigaset device will be GAP only.
  • The above Gigaset DECT handsets can be installed behind Bintec and Gigaset DECT systems and are fully supported. (Using software 2.59)