Versions Compared

Old Version 6

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version 7

changes.mady.by.user Kopowski Thomas

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Give the Line an unique name, you do not need to enter a username and password, because Dean Connect is working based on IP address

 

Image AddedDean Provider.jpgImage Removed

In the Provider pull-down list, select "new.."

 

Dean Settings.jpgImage RemovedImage Added

Number Area settings:

Just add the telephone numbers for this SIP trunk. The Country Code and Area Code can be filled in, if different than the default setting.

 

Dean NumberArea.jpgImage RemovedImage Added

 

Info
titleImportant

With the 5.1.0.11 Release an issue is found with sending a BYE to disconnect the call, the issue is retested with the 5.2.0.10 release and is solved.

With the 5.2.0.10 Release, the following is important.

When the provider setting is set on auth mode: IP address, the Gigaset T300/T500 will send qualify messages even if the setting in the webinterface is on NO. You can change this by changing the setting in the file: /etc/asterisk/sip.conf. Search for the provider and change qualify to no. When changing the device/line setting, the sip.conf will be overwritten. Please remember this. Restart or reboot have no influence on the setting. Else, please ask Dean Connect to enable the qualify in their network.

...