Overview

Image Removed
SD card

In order to extend the internal memory and store personal data, images, videos or music, you can insert a microSD card (not included) into your phone.

Image Removed

Display key

You can use the display key to switch the display on or off, or to capture a screenshot of the display currently shown.

• If the screenshot feature is activated: A screenshot of the display currently shown is captured.
• If the screenshot feature is not activated: The display is switched on/off.

The display key is located behind the right cover on the back of the device.

Image Removed

Using the phone in different scenarios

...

First steps

Your device will start automatically as soon as it is connected to the mains power supply. Please be aware that if the device is powered by PoE (Power over Ethernet) it is supplied with power as soon as it is connected to an Ethernet switch with PoE-functionality.

Setting the language

On the Start screen tap on
Image Removed to open the list of available apps.  
Image Removed  Select
Image Removed Settings.
Scroll down and select
Image Removed  Language & input  
Image Removed  Tap on Language  
Image Removed  Select your desired language.

Registering the handset (DECT)

If you use a DECT handset you need to register it on the phone.
Install the handset as described in the Installation Guide and place it in the cradle in order to charge the battery.
On the Start screen tap on
Image Removed to open the list of available apps.  
Image Removed  Select
Image Removed Settings.
Select
Image Removed  DECT  
Image Removed  Tap on Register DECT Handset. Image Removed
The registration process may take some time. If the reg istration is successful a message is output.
Establishing a connection to the local network
Your phone must be connected to the local network before it can connect to a phone system or the Internet and before you can operate it from a PC. You can connect the phone to the local network via Ethernet or Wi-Fi.

Connecting via Ethernet

Make sure that the phone's LAN port
Image Removed is connected to an Ethernet switch/router by an Ethernet cable.
On the Start screen tap on
Image Removed to open the list of available apps.  
Image Removed  Select
Image Removed Settings.
Select
Image Removed  Ethernet  
Image Removed  Drag switch by Ethernet to the right to switch on Ethernet function. Image Removed
The network connection is established if the phone has automatically been assigned an IP address from a DHCP server in the network.
If your device is assigned a static IP address, your net work administrator must tell you the IP address of your device. You then assign this address to your phone manually.
Ethernet configuration Image Removed
Tap on Ethernet configuration.
If the network connection is established, the configu ration information, e.g. the IP address, is displayed.
If the network connection has not been established automatically, you can enter the configuration data manually.
Proxy configuration
When a connection to internal or external network resources is made via a proxy server, you must enter the proxy server data. Proxy settings are used by the browser but may not be used by other apps.
Tap on Proxy Configuration.  
Image Removed  Enter the data of your proxy server.

Connecting via Wi-Fi

...

Wi-Fis that are not in range or that withhold the SSID and are therefore not displayed in the list can be entered manually. You will require the network name (SSID), the security protocol used and the network key. Once the tablet is in range of one of these Wi-Fis, the connection is established.
Select
Image Removed  Wi-Fi  
Image Removed  Tap on
Image Removed  
Image Removed  Enter Network SSID.
Select security protocol (None, WEP, WPA/WPA2 PSK, 802.1x EAP).
Enter password/network key.  
Image Removed  Save.
Configuring Internet telephony
Before you can use the device to phone anyone you need the services of a VoIP provider.
Prerequisite:
uYou have a phone system in your network that provides VoIP accounts for your device, or
uYou have registered with a VoIP provider (e.g., via your PC) and set up a VoIP account.
The device searches the network for a provisioning file and checks whether VoIP accounts already exist. If the telephone has existing VoIP accounts, these accounts are configured automatically. You can now make calls with your phone via the Internet.
If the telephone has no existing VoIP accounts, you must configure them manually. The Web config urator will help you with this (£ p. 20).
Web configurator – configuring the phone on a PC
The Web configurator provides you with a user interface that you can use to configure your Maxwell 10 on the PC.
Prerequisites:
uYour phone is connected to the local network.
uThe Web server is enabled.
Enabling the web server
ÛOn the Start screen tap on
Image Removed to open the list of available apps.  
Image Removed  Select
Image Removed Settings.

Starting the Web configurator
To start the Web configurator you will need the IP address for your phone. You will find this via the phone display, in the Ethernet or WLAN settings for the device:
If connected via Ethernet:
ÛOn the Start screen tap on
Image Removed  
Image Removed  Select
Image Removed Settings  
Image Removed  
Image Removed  Ethernet  
Image Removed  Ethernet configuration.
If connected via Wi-Fi:
ÛOn the Start screen tap on
Image Removed  
Image Removed  Select
Image Removed Settings  
Image Removed  
Image Removed  Wi-Fi  
Image Removed  Tap on the network your phone is connected to.

Accessing the Web configurator:
ÛLaunch the Internet browser on your PC.
ÛEnter the IP address in the browser's address field. Example: Image Removed
The login screen appears.
ÛSelect the appropriate language from the drop-down list.
ÛEnter the password. Default: admin
ÛClick on Login.
The Web configurator will now start.
ÛSelect the function that you wish to use.
uUse the Settings tab to set or change individual functions on your phone.
uOpen the Status tab to obtain information about the status of your phone (
Image Removed  p. 38).

Understanding the Web configurator menu tree
Network and connectors
All of the settings for connecting your phone to the local network must be correct to enable commu nication with other devices in the network and phone calls via the Internet.
If you use the Web configurator, your phone is already connected to the local network. You can use the Network and Connections menu to change and extend these settings. You can also create set tings for phone connections:
uLAN settings (£ p. 14)
uPhone Systems (£ p. 16)
uQoS settings (Quality of Service) (£ p. 17)
uVoIP settings (£ p. 18)
uSecurity settings (£ p. 19)
LAN settings

...