Versions Compared

Old Version 7

changes.mady.by.user Kopowski Thomas

Saved on

compared with

New Version 8

changes.mady.by.user Kopowski Thomas

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Just enter or choose the values according to your contract or NGN data you received from the provider.

Info
titleAttention

HFO Telecom uses multiple IP-addresses for the DNS registrar.hfosip.de .

Therefore incoming INVITEs might be rejected when using the DNS-name.

Please use the IP-address 123.167.162.5 instead for the Registrar-field.

 

 

Section
Column
width40%

Example of HFO SIP gateway settings 1/3.

Example of HFO SIP gateway settings 2/3.

Example of HFO SIP gateway settings 3/3.

Column
width60%

Dial command

The dial command is the command which is used in the asterisk software. The term {number:1}  means, that at the dialled number (e.g. 0089987654321) the first digit is removed. If you don't use a line access code (in most cases '0' is used), you have to remove the ':1' ! ! !

Group

Select here the previously created gateway group.

Update remote party ID (CLIP)

To display the correct extension at external parties, you have to use the P-Asserted-Identity (PAI) setting. If this is not selected, only the head-number (e.g. 0891234567-0) will be presented, no matter which extension is used to dial.

Advanced Parameter

You have to enter the complete term 'fromdomain=hfosip.de' in the value-field and press the '+'-sign.

Underneath you will see then a preview of the entry in the sip.conf file.

...