Versions Compared

Old Version 2

changes.mady.by.user Kopowski Thomas

Saved on

compared with

New Version 3

changes.mady.by.user Kopowski Thomas

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Section
Column
width70%
Feature                                                           
Outgoing CallsYes
Incoming CallsYes
CLIP incomingYes
CLIP outgoingYes
Call ForwardingYes
Call TransferYes
Call WaitingYes
DTMFYes
Anonymous CallNo*
A-number forwardingNo*
Faxsee chart below

*= use the Sipgate WebUI instead

 

 

Column
width30%

Table of Contents

...

In the Gateway group you have to define the Outbound Caller ID, the Inbound DIDs (how the number is forwarded to the Inbound routes) and the Inbound caller ID (number presentation of external caller). in addition you can permit here inbound calls in general for this gateway group.

 

Section
Column
width40%

 Image Removed

Image Added

Example of HFO SIP trunk gateway group settings.

Column
width60%

Outbound caller ID

As the

last 3 digits of the SIP account number are matching the user extension (--> 678), we just add the full extension to the trunk part 498912345

number is fixed with this account, every user who is allowed to use this line will present the same number to the callee.

For external calls, we

will send 498912345678 to the provider and he

will present

+498912345678

e.g. 00498912345678 to the calling party.

Info
titleNumber format

The number format used for outgoing calls has to be in E164 format, so, full number, without + or leading zeros, but with country-code!

 

Asserted Identity

These fields are used specially for external forwardings. Some providers need special settings in order to present the correct number at the receiving party.

!!! For Sipgate basic accounts this setting is not of interest, as you can only modify your CLIP via the Sipgate basic Web-portal. This is valid for standard calls, anonymous calls or also call forwardings. !!!

Inbound DIDs

For incoming calls

, we will route the complete number to the Inbound routes (e.g. 08912345678)

, you can use the regular expression, generated by the setup assistant. In your case you would have to adjust the city-code and the first part of the extension, according to your line-settings.

^(?:(?:(?:0049|\+49|49|0)?89)?12345)?(.*)

This expression cuts all possibly available country- and city-codes and the pilot-number from the incoming number and only the extension is remaining (here: 678). This will be forwarded to the Inbound Routes.

Inbound caller ID

For incoming calls, we will add an additional 0 in front of the external number of the caller, in order to use the callback-feature of the phone (e.g.

008987654321

0089987654321). During the call-setup the additional 0 will be automatically removed.

Gateways

This field will be empty when you create this Gateway group. It will show later the assigned SIP gateways.

 

 

SIP gateway

In the Gigaset PBX go to "Administration" - "Routes" - "SIP gateways" enter a name for the new gateway and click on: Create new gateway

...

Just enter or choose the values according to your contract or data you received from the provider.

 

Section
Column
width40%

Image RemovedImage Added

Example of HFO SIP Sipgate basic gateway settings 1/3.

Image RemovedImage Added

Example of HFO SIP Sipgate basic gateway settings 2/3.

Image RemovedImage Added

Example of HFO SIP Sipgate basic gateway settings 3/3.

Column
width60%

Dial command

The dial command is the command which is used in the asterisk software. The term {number:1}  means, that at the dialled number (e.g. 008987654321) the first digit is removed. If you don't use a line access code (in most cases '0' is used), you have to remove the ':1' ! ! !

Group

Select here the previously created gateway group.

Update remote party ID (CLIP)

This setting is just optional, as the provider replaces outgoing CLIP which is not valid with the default number of the SIP account.

Advanced Parameter

You have to enter the complete term 'fromdomain=sipgate.de' and also 'fromuser=123456789' in the value-field and press the plus-sign.

Underneath you will see then a preview of the entry in the sip.conf file.

...

In addition it is advised to activate the advanced options by clicking it to 'ON' and then pressing Show.


Section
Column
width40%

Image RemovedImage Added

Example of HFO Telecom Sipgate basic Inbound routes.

Column
width60%

Rule

Enter here a name for the according rule.

Date / Weekdays / Time

With these settings you can configure a time-controlled routing to different targets.

Pattern / Target

In the pattern you define which part of the incoming number is used to forward the call to the according extension.

Because the Sipgate basic contains only one number, we do a 1:1 match between external and internal number.

In our example we forward incoming calls to 08912345678 directly to the extension 678.

The shown example is the easiest way for single numbers, but also other configurations or assignments are possible.

...

In the Gigaset PBX go to "Administration" - "Routes" - "Outbound routes" activate the Advanced options by clicking it to 'ON' and then pressing Show.

 

Section
Column
width40%

Image RemovedImage Added

Example of HFO Telecom Sipgate basic Outbound routes.

Column
width60%

Rule

Enter here a name for the according rule.

Date / Weekdays / Time

With these settings you can configure a time-controlled routing.

Pattern

In the pattern you define how the outside line is seized. In our example all dialled numbers starting with '0' will use the Gateway group Sipgate basic.

Info
titleMultiple basic accounts

If you want to use multiple Sipgate basic accounts in the PBX, you have to create a permission group for each user.

The dedicated permission group has to be assigned to the user in the user-settings and then for the outbound routes you have to select the according group, too!

The default setting for groups ([all]) can't be used in this case.

Fax support

Following table shows you the current state (15.05.2015) of supported fax constellations. These results are without a guarantee. Due to different end-devices, configuration of PBX or other settings the fax transmission might fail.

Used devices or services:

Canon Fax-L100 (internal FXS), www.minifax.de (external SW-Fax), Triumph Adler DCC 2725 (external machine-Fax)

We're currently working on an automatic fallback function, which should solve the remaining NOK constellations.