Page History

...

Section

Column

width	70%

Feature
Outgoing Calls	Yes
Incoming Calls	Yes
CLIP incoming	Yes
CLIP outgoing	Yes
Call Forwarding	Yes
Call Transfer	Yes
Call Waiting	Yes
DTMF	Yes
Anonymous Call	No*
A-number forwarding	No*
Fax**	see chart below

*= use the Sipgate WebUI instead

**= Sipgate Team offers a full Fax2Mail solution via their web-platform. Preferably use this service!

Column

width	30%

Table of Contents

...

In the Gateway group you have to define the Outbound Caller ID, the Inbound DIDs (how the number is forwarded to the Inbound routes) and the Inbound caller ID (number presentation of external caller). in addition you can permit here inbound calls in general for this gateway group.

Section

Column

width	40%

Image Removed

Image Added

Example of Sipgate Team gateway group settings.

Column

width	60%

Outbound caller ID

As the number is fixed with this account, every user who is allowed to use this line will present the same number to the callee.

For external calls, we will present e.g. 00498912345678 to the calling party.

Asserted Identity

These fields are used specially for external forwardings. Some providers need special settings in order to present the correct number at the receiving party.

!!! For Sipgate Team accounts this setting is not of interest, as you can only modify your CLIP via the Sipgate Team Web-portal. This is valid for standard calls, anonymous calls or also call forwardings. !!!

Inbound DIDs

For incoming calls, you can use the regular expression, generated by the setup assistant. In your case you would have to adjust the city-code and the first part of the extension, according to your line-settings.

^(?:(?:(?:0049|\+49|49|0)?89)?12345)?(.*)

This expression cuts all possibly available country- and city-codes and the pilot-number from the incoming number and only the extension is remaining (here: 678). This will normally be forwarded to the Inbound Routes.

! ! ! The system receives only the username from Sipgate Team. Therefore the regular expression is not working as expected. But you can still use the expression, as the complete username is forwarded to the Inbound Routes ! ! !

Inbound caller ID

For incoming calls, we will add an additional 0 in front of the external number of the caller, in order to use the callback-feature of the phone (e.g. 0089987654321). During the call-setup the additional 0 will be automatically removed.

Gateways

This field will be empty when you create this Gateway group. It will show later the assigned SIP gateways.

...

Just enter or choose the values according to your contract or data you received from the provider.

Section

Column

width	40%

Image Added

Image RemovedExample of Sipgate Team gateway settings 1/3.Image Removed

Image Added

Example of Sipgate Team gateway settings 2/3.

Image Added

Image RemovedExample of Sipgate Team gateway settings 3/3.

Column

width	60%

Dial command

The dial command is the command which is used in the asterisk software. The term {number:1} means, that at the dialled number (e.g. 008987654321) the first digit is removed. If you don't use a line access code (in most cases '0' is used), you have to remove the ':1' ! ! !

If you want to use a prefix in the outbound Routes, then enter '{prefix} before the term '{number:1}.

Group

Select here the previously created gateway group.

Update remote party ID (CLIP)

This setting is just optional, as the provider replaces outgoing CLIP which is not valid with the default number of the SIP account.

Advanced Parameter

You have to enter the complete term 'fromdomain=sipgate.de' , 'fromuser=12345678912345678t9' and 'username=12345678912345678t9' in the value-field and press the plus-sign.

Underneath you will see then a preview of the entry in the sip.conf file.

Info

title	Codecs

Sipgate >Team also do support G.722 and G.711 ulaw. For wideband calls (IP to IP) activate also the G.722 codec in the SIP-gateway.

...

In addition it is advised to activate the advanced options by clicking it to 'ON' and then pressing Show.

Section

Column

width	40%

Image Added

Image RemovedExample of Sipgate Team Inbound routes.

Column

width	60%

Rule

Enter here a name for the according rule.

Date / Weekdays / Time

With these settings you can configure a time-controlled routing to different targets.

Pattern / Target

Info

title	Sipgate Team

ATTENTION! The incoming number of our extension is not send in the default fields. The system sees only the username (in our example: 12345678t9) of the account, which can also contain letters.

Therefore we have to forward the whole incoming 'number' to one internal number ! ! !

For Sipgate team you have to forward the complete 'number' ^(.*) to an internal extension (e.g. 678).

Because the Sipgate Team informations contain the username, not the number, we do a 1:1 match between external and internal number.

In our example we forward incoming calls for username 12345678t9 directly to the extension 678.

Outbound routes

In the Gigaset PBX go to "Administration" - "Routes" - "Outbound routes" activate the Advanced options by clicking it to 'ON' and then pressing Show.

Section

Column

width	40%

Image RemovedImage Added

Example of Sipgate Team Outbound routes.

Column

width	60%

Rule

Enter here a name for the according rule.

Date / Weekdays / Time

With these settings you can configure a time-controlled routing.

Pattern

In the pattern you define how the outside line is seized. In our example all dialled numbers starting with '0' will use the Gateway group Sipgate basic.

Info

title	Multiple basic accounts

If you want to use multiple Sipgate Team accounts in the PBX, you have to create a permission group for each user.

The dedicated permission group has to be assigned to the user in the user-settings and then for the outbound routes you have to select the according group, too!

The default setting for groups ([all]) can't be used in this case.

...

Page tree

Versions Compared

Old Version 1

New Version 2

Key

Outbound routes