Page History

...

Section

Column

width	70%

Feature
Outgoing Calls	Yes
Incoming Calls	NoYes
CLIP incoming	Yes
CLIP outgoing	Yes
Call Forwarding	NoYes
Call Transfer	Yes
Call Waiting	Yes
DTMF	Yes
Anonymous Call	No*Yes
A-number forwarding	No*
Fax	see chart below**

*= use the Sipgate WebUI instead

**= Sipgate Trunking offers a full Fax2Mail solution via their web-platform. Preferably use this service!

Column

width	30%

Table of Contents

...

In the Gateway group you have to define the Outbound Caller ID, the Asserted Identity settings, the Inbound DIDs (how the number is forwarded to the Inbound routes) and the Inbound caller ID (number presentation of external caller). in addition you can permit here inbound calls in general for this gateway group.

Section

Column

width	40%

Image Added

Image RemovedExample of Sipgate trunking gateway group settings.

Column

width	60%

Outbound caller ID

As we are using a block of 10 numbers with this account, every user who is allowed to use this line will present the number 498912345 49891234567 plus the last digit of his extension to the provider.

The provider will then take care about the correct number-format to the callee. For example we will present e.g. 498912345678 to the provider and he will change it to 08912345678 to the callee.

In case your block contains more numbers, you can change the first expression to ^\d(\d\d) or even ^(\d\d\d). Then you have to check if also the second expression has to be changed.

Asserted Identity

These fields are used specially for external forwardings. Some providers need special settings in order to present the correct number at the receiving party.

For Sipgate trunking accounts these settings need the same values than the Outbound caller ID.

Inbound DIDs

For incoming calls, you can use the regular expression, generated by the setup assistant. In your case you would have to adjust the city-code and the first part of the extension, according to your line-settings.

^(?:(?:(?:0049|\+49|49|0)?89)?12345)?(.*)

This expression cuts all possibly available country- and city-codes and the pilot-number from the incoming number and only the extension is remaining (here: 678). This will be forwarded to the Inbound Routes.

Inbound caller ID

For incoming calls, we will add an additional 0 in front of the external number of the caller, in order to use the callback-feature of the phone (e.g. 0089987654321). During the call-setup the additional 0 will be automatically removed.

Gateways

This field will be empty when you create this Gateway group. It will show later the assigned SIP gateways.

...

Just enter or choose the values according to your contract or data you received from the provider.

Section

Column

width	40%

Image Added

Image Removed

Example of Sipgate trunking gateway settings 1/3.

Image RemovedImage Added

Example of Sipgate trunking gateway settings 2/3.

Image Removed

Image Added

Example of Sipgate trunking gateway settings 3/3.

Column

width	60%

Dial command

The dial command is the command which is used in the asterisk software. The term {number:1} means, that at the dialled number (e.g. 008987654321) the first digit is removed. If you don't use a line access code (in most cases '0' is used), you have to remove the ':1' ! ! ! In case you want to use the prefix in the outbound routes, you have to enter '{prefix} to the dial command: SIP/{prefix}{number:1}@{gateway}

Group

Select here the previously created gateway group.

Update remote party ID (CLIP)

This setting is just optional, as the provider replaces outgoing CLIP which is not valid with the default number of the SIP account.

Advanced Parameter

You have to enter the complete term 'fromdomain=sipconnect.sipgate.de' , 'username=12345678t9' and also 'fromuser=12345678t9' in the value-field and press the plus-sign.

Underneath you will see then a preview of the entry in the sip.conf file.

...

In addition it is advised to activate the advanced options by clicking it to 'ON' and then pressing Show.

Section

Column

width	40%

Image RemovedImage Added

Example of Sipgate trunking Inbound routes.

Column

width	60%

Rule

Enter here a name for the according rule.

Date / Weekdays / Time

With these settings you can configure a time-controlled routing to different targets.

Pattern / Target

In the pattern you define which part of the incoming number is used to forward the call to the according extension.

Because we already receive the correct extension from the gateway group, we don't need any further number manipulation here.

In our example we forward incoming calls directly to the according extension.

The shown example is the easiest way for a block of numbers, but also other configurations or assignments are possible.

...

In the Gigaset PBX go to "Administration" - "Routes" - "Outbound routes" activate the Advanced options by clicking it to 'ON' and then pressing Show.

Section

Column

width	40%

Image RemovedImage Added

Example of Sipgate trunking Outbound routes.

Column

width	60%

Rule

Enter here a name for the according rule.

Date / Weekdays / Time

With these settings you can configure a time-controlled routing.

Pattern

In the pattern you define how the outside line is seized. In our example all dialled numbers starting with '0' will use the Gateway group Sipgate trunking.

Fax support

Fax currently has been tested (30.05.2015) has not been tested, yet. These results are without a guarantee. Due to different end-devices, configuration of PBX or other settings the fax transmission might fail.

	Sending
Receiving
		Internal FXS	Internal SW-Fax	External SW-Fax	External machine-Fax
	Internal FXS	---	NT---NT	No	NTNo
	Internal SW-Fax	NT---	---	NTNoNT	No
	External SW-Fax	NTYesNT	No	---	---
	External machine-Fax	NTYesNT	No	---	---

Used devices or services:

...

Page tree

Versions Compared

Old Version 2

New Version 3

Key

Fax support