Versions Compared

Old Version 2

changes.mady.by.user Kopowski Thomas

Saved on

compared with

New Version 3

changes.mady.by.user Kopowski Thomas

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Section
Column
width70%
Feature                                                           
Outgoing CallsYes
Incoming CallsYes
CLIP incomingYes
CLIP outgoingYes
Call ForwardingYes
Call TransferYes
Call WaitingYes
DTMFYes
Anonymous CallYes
A-number forwardingYes*
Faxsee chart below**

*= To send the A-number in Call forwardings, go to the Easybell web-portal and use as Mode the option "Trunk". For the own number-representation select "Geräteabhängig" and for CLIP-No-Screening the option "P-Preferred-Identity".

**= For anonymous calls, use the function available on the Web-portal from Deutsche Telefon ( http://power.dtst.de )Easybell offers a full Fax2Mail solution via their web-portal. To receive faxes, preferably use this service!!!

 

 

Column
width30%

 

Table of Contents

...

Section
Column
width40%

Example of Easybell Trunk gateway settings 1/3.

 

Example of Easybell Trunk gateway settings 2/3.

 

Example of Easybell Trunk gateway settings 3/3.

ATTENTION: The default dial-string '{number:1}  must be changed to '{number}, as the Hosted PBX is removing the leading 0, not the Gigaset PBX system!!!!

the first digit is removed. If you don't use a line access code (in most cases '0' is used), you have to remove the ':1' ! ! !

In case you want to use the prefix-fields from the outbound rules, please add '{prefix} before '{number:1} .

Group

Select here the previously created gateway group.

Update remote party ID (CLIP)

To display the correct extension at external parties, you have to use the P-Asserted-Identity (PAI) setting. This parameter is optional, as A-numbers won't be forwarded by the Hosted platformis also important for displaying the A-number at call-forwardings.

Advanced Parameter

You have to enter 3 different terms into the advanced settings: 'fromuser=0891234567800498912345678' and 'fromdomain=92sip.60easybell.208.105de' . Enter these terms separately into in the value-field and press the '+'-sign.

Underneath you will see then a preview of the entry in the sip.conf file.Please check the IP-address of the domain with the IP-address you can see in the web-portal of Deutsche Telefon!!!

Column
width60%

Registrar

You have to use the IP-address Enter here the DNS name of the server, according to the account settings in the web-portal of Deutsche TelefonSIP-server, here: sip.easybell.de .

Dial command

The dial command is the command which is used in the asterisk software. The term {number:1}  means, that at the dialled number (e.g. 0089987654321) will be forwarded to the hosted PBX as is.

Info
titleDial Command

 

Inbound routes

In the Gigaset PBX go to "Administration" - "Routes" - "Inbound routes" select the correct Gateway group and press Show.

...

Section
Column
width40%

Example of Easybell Trunk Outbound routes.

Column
width60%

Rule

Enter here a name for the according rule.

Date / Weekdays / Time

With these settings you can configure a time-controlled routing.

Pattern

In the pattern you define how the outside line is seized. In our example all dialled numbers starting with '0' will use the Gateway group Deutsche Telefon Standard Easybell Trunk.

Remark: For calling anonymous to external parties, use the CLIR-setting in the HOME screen of the user!

...

ReceivingSending

 

Internal FXSInternal SW-FaxExternal SW-FaxExternal machine-Fax
Internal FXS------NOKOKNOK
Internal SW-Fax------OKNOKOKNOK
External SW-FaxOKNOKOK------
External machine-FaxOKNOKOK------

Used devices or services:

...