Page History

Image Modified

Example of Netplanet Trunk gateway settings 1/3.

Image Modified

Example of Netplanet Trunk gateway settings 2/3.

Image Modified

Example of Netplanet Trunk gateway settings 3/3.

Registrar

Enter here the DNS name of the SIP-server, here: mgw1ms1.call.mytweakcarrier66.atnet

Dial command

The dial command is the command which is used in the asterisk software. The term {number:1}  meanswould mean, that at the dialled number (e.g. 001987654321) the first digit is removed. If you don't use a line access code (in most cases '0' is used), you have to remove the ':1' ! ! ! (here the :1 is removed)

In case you want to use the prefix-fields from the outbound rules, please add '{prefix} before '{number:1} .

Group

Select here the previously created gateway group.

Update remote party ID (CLIP)

As the A-number is not presented for forwarded calls to 3rd parties, this setting can be ignored.

Advanced Parameter

You have the possibility to enter 2 different terms into the advanced settings : for example 'fromuser=123456789' and 'fromdomain=mgw1.mytweak.at' . (here are no parameters needed). Enter these terms separately into in the value-field and press the '+'-sign.

Underneath you will see then a preview of the entry in the sip.conf file.

Image Modified

Example of Netplanet Trunk Inbound routes.

Rule

Enter here a name for the according rule.

Date / Weekdays / Time

With these settings you can configure a time-controlled routing to different targets.

Pattern / Target

In the pattern you define which part of the incoming number is used to forward the call to the according extension.

In our example we receive already the correct extension from the gateway group. Therefore no further number-manipulation is necessary.

When the PBX finds an according extension it will route the call to it.

But you can add here exceptions from this rule (e.g. when using pilot-number-only!), for example if you want to forward the incoming call to an internal fax or waiting queues, etc.

Please have in mind the order of these rules, as the system is using First Match!!!