Versions Compared

Old Version 3

changes.mady.by.user Kopowski Thomas

Saved on

compared with

New Version 4

changes.mady.by.user Sailer, Martin

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Section
Column
width70%
Feature                                                           
Outgoing CallsYes
Incoming CallsYes
CLIP incomingYes
CLIP outgoingYes
Call ForwardingYes
Call TransferYes
Call WaitingYes
DTMFYes
Anonymous CallNoYes
A-number forwardingNoYes
Faxsee chart below

 

 

Column
width30%

Table of Contents

...

Section
Column
width40%

Example of MyTweak Trunk gateway settings 1/3.

 

Image RemovedImage Added

Example of MyTweak Trunk gateway settings 2/3.

 

 

Example of MyTweak Trunk gateway settings 3/3.

Column
width60%

Registrar

Enter here the DNS name of the SIP-server, here: mgw1.mytweak.at

Dial command

The dial command is the command which is used in the asterisk software.

The term {number:1}  means, that at the dialled number (e.g. 001987654321) the first digit is removed. If you don't use a line access code (in most cases '0' is used), you have to remove the ':1' ! ! !

The term {prefix} is used in the outbound routes. If you have entered there a rule which uses the prefix. it will be automatically added in front of the dialled number.

Group

Select here the previously created gateway group.

Update remote party ID (CLIP)

As the A-number is not presented for forwarded calls to 3rd parties, this setting can be ignored.

Advanced Parameter

You have to enter 2 different terms into the advanced settings: 'fromuser=123456789' and 'fromdomain=mgw1.mytweak.at' . Enter these terms separately into in the value-field and press the '+'-sign.

Underneath you will see then a preview of the entry in the sip.conf file.

...