Versions Compared

Old Version 2

changes.mady.by.user Bakker, Bas

Saved on

compared with

New Version 3

changes.mady.by.user Bakker, Bas

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

BCom

Section
Column
width50%
Feature                                                           
Outgoing CallsYes
Incoming CallsYes
CLIP incomingYes
CLIP outgoingYes
Call ForwardingYes
Call TransferYes
Call WaitingYes
DTMFYes
Anonymous CallYes
A-number forwardingYes

 

 

Column
width20%

 

 

 

Column
width30%

Table of Contents

 

 

Info
titleImportant

BCom uses multiple servers behind the domain name sip.bcom.nl (redundancy and load balancing), because of the possibility that a call can come in from another IP address than the registration IP, the call is declined if the other IP addresses are unknown to the PBX. To solve this you have to create dummy SIP-gateways.

 

Gigaset T640/T440 settings.

In the Gigaset PBX go to "Administration" - "SIP Gateways" - At "Gateway" enter the desired name and click on "Create new gateway":

SIP Gateway provider settings:

 

 

Dummy SIP Gateways:

 

Underneath screenshots of 1 dummy account....

Extended settings:

To enable incoming calls, you need to use the settings below.

Open the Manual Configuration and change the default settings like in the example below. Do not forget to enable the check-box Active.

<Picture>

You can copy the text below to paste into the field.

Background Color
#C0C0C0
#C0C0C0

Loremipsum
1
1