Introduction

The Gigaset N720 does not have the Microsoft Link implementation in the device, to be able to connect to Microsoft Link additional hardware is needed. AudioCodes provides a solution with there SPS server that will be the interface to the Link environment.

AudioCodes and Gigaset performed a series of tests to validate the connection of Gigaset N720 IP DECT Multicell System, through AudioCodes Gateway with SIP Phone Support (SPS) software, into the Microsoft Lync Server.

Under the described configuration the Gigaset DECT phones were validated to support the following features:

• Basic Calls
• Hold
• Call Waiting
• Forward
• Transfer
• Presence Test
• Directory
• Base Station Roaming

Setup

Below is an overview of a possible network setup.

AudioCodes SPS server

SPS Installation procedure

For the detailed SPS installation procedure you can click here to download the AudioCodes installation manual.

SPS Server Architecture

Presence Status

Presence can be configured manually by dialing a special number.

Status is persistent, never expires.

Add User

In detailed it is described in the AudioCodes installation manual, but here some high level explanation how to add a user in the SPS server.

• Search for the user in Active Directory
• Add the user to the SPS
• Add device for the new user

SIP Registration Password

• Find the user
• Click on Edit
• Click on Advanced Settings

Gigaset Configuration

Here you can see an example how it is done using an Gigaset device, registered against the SPS. Settings are dependent on the customer configuration.

Installation can be done using:

• Gigaset N720
• Gigaset N510
• Gigaset DE900/700
• Gigaset DE410/310

Image Added