Page History

Image RemovedImage Added

Example of QSC IPFonie extended sip gateway settings 1/2. 

Image Modified

Example of QSC IPFonie extended connect gateway settings 2/2.

Registrar

Enter here the DNS name of the SIP-server, here:

sip.qsc.de

You have to use this DNS-name for registration, otherwise incoming calls will be rejected by the server.

User

Enter here the pilot-number of your account followed by "@qsc.de", here:

089123456@qsc.de

In case you have multiple number blocks, you have to create for each block a separate Gateway-group, SIP-gateway and incoming/outgoing routing!

Dial command

The dial command is the command which is used in the asterisk software. The term {number:1}  means, that at the dialled number (e.g. 0089987654321) the first digit is removed. If you don't use a line access code (in most cases '0' is used), you have to remove the ':1' ! ! !

In case you want to use the prefix-fields from the outbound rules, please add '{prefix} before '{number:1} .

Source of destination number

To derive the correct target number from the INVITE, select here

To: header

From Domain

To have the signalling correct enter here the following domain:

sip.qsc.de

T.38 support

In order to have the best possible fax support, you should activate this parameter. Check also the fax-interop list below. In case you encounter issues for incoming/outgoing fax, please try to deactivate the option.

Group

Select here the previously created gateway group.

Advanced Parameter