Versions Compared

Old Version 3

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version 4

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
           Mobile devices > oper name "add_hs", see XML files definitionTelephony > Telephony > Telephony > > Online directories > System > System > System > System >
Parameter nameValue: minValue: maxvalidatorValue: Allowed
Web-interface: Settings - Network - IP
   Device name
   IPv4 / IPv6 
   Dynamic / Static 
   IP address 
   Subnet mask 
   Standard gateway 
   Preferred DNS
    Alternate DNS
Web-interface: Settings - Network - LAN
   VLAN tagging
   VLAN identifier 
   VLAN priority
Web-interface: Settings - Base stations - Administration
ConfirmedBaseStations.<mac>.name   Name / Location This name should make it easier to assign the base station within the logical and spatial structure of the DECT network
ConfirmedBaseStations.<mac>.ucTxPower

0

1 

0 = Normal power output (Default)
1= Reduce TX power by 8dB for external antenna operation

ConfirmedBaseStations.<mac>.bActivateCell01 0 = Base station deactivated
1 = Activated base station (Default)
Web-interface: Settings - Base stations - Synchronization

ConfirmedBaseStations.<mac>.ucCluster

110 Select the cluster to which the base should be assigned to from the option menu.
ConfirmedBaseStations.<mac>.ucSyncLevel110 Select the synchronization level for the base station.
ConfirmedBaseStations.<mac>.bSyncLanMaster01 

0 = Off (Default)
1 = LAN Master

Web-interface: Settings - Provider or PBX profiles
SipProvider.<0-9>.Name IP<1-10>  Name for the provider or PBX profile. This name is shown in the Provider/PBX list
SipProvider.<0-9>.Domain  Domain part of the user address 
SipProvider.<0-9>.ProxyServerAddress  Proxy server address
SipProvider.<0-9>.ProxyServerPort165535Proxy server port (Default 5060)
SipProvider.<0-9>.RegServerAddress  Registration server
SipProvider.<0-9>.RegServerPort165535

 

Registration server port (Default 5060)
SipProvider.<0-9>.RegServerRefreshTimer  Registration refresh time (Default 180)
SipProvider.<0-9>.TransportProtocol131 = UDP
2 = TCP
3 = TLS
SipProvider.<0-9>.UseSIPS01 

0 = SIPS disabled (Default)
1 = SIPS enabled

SipProvider.<0-9>.DnsQuery01 0 = A
1 = SRV + A 
SipProvider.<0-9>.FailoverServerEnabled00: off
1: on 		Failover Server > Enable registration
SipProvider.<0-9>.FailoverServerAddress   Registration server
SipProvider.<0-9>.FailoverServerPort165535

 

Registration port (Default 5060)
SipProvider.<0-9>.OutboundProxyMode2  Outbound proxy mode
SipProvider.<0-9>.OutboundProxyAddress  Outbound server address
SipProvider.<0-9>.OutboundProxyPort165535 Outbound proxy port  (Default 5060)
SipProvider.<0-9>.MWISubscription01 

0 = Do not send SIP Subscribe for MWI
1 = Send SIP Subscribe for MWI

SipProvider.<0-9>.AvailableCodecs18,9,8,0 

 

0 = g711u
8 = g711a
9 = g722
18 = g729
SipProvider.<0-9>.ActiveCodecs18,9,8,00: g711u
8: g711a
9: g722
18: g729 		0 = g711u
8 = g711a
9 = g722
18 = g729
SipProvider.<0-9>.RTPPtime1020, 30 Length of time in milliseconds (10, 20 (Default), 30) represented by the audio data in one packet.
SipProvider.<0-9>.HoldType01 0 = Inactive
1 = Sendonly (Default)
SipProvider.<0-9>.CT_HoldTT_Attended01 0 = Attended Transfer
1 = Unattended Transfer
SipProvider.<0-9>.CT_HoldTT_Unattended01 Settings for Codecs > Hold towards Transfer-Target > Unattended Transfer
SipProvider.<0-9>.SRTP_Enabled01 0 = SRTP disabled (Default)
1 = SRTP enabled
SipProvider.<0-9>.AcceptNonSRTPCalls01 

0 = Do not accept non-SRTP calls
1 = Accepts non-SRTP calls

SipProvider.<0-9>.CLIPSource02 0 = FROM
1 = PPI+FROM
2 = PAI+PPI+FROM (Default)
Web-interface: Settings - Mobile devices - Administration
hs.<ipui>.RegStatus Settings - Mobile devices - Administration  Mobile device > RegStatus

hs.<ipui>.DECT_AC

  regex: ^\d{4}$Mobile device > Authentication Code (PIN)
SipAccount.<ipui>.AuthName   Personal provider data > SIP Authentication name
SipAccount.<ipui>.AuthPassword  

 

Personal provider data > SIP Authentication password
SipAccount.<ipui>.UserName   Personal provider data > SIP Username
SipAccount.<ipui>.DisplayName   Personal provider data > SIP Display name
SipAccount.<ipui>.ProviderId   Personal provider data > VoIP provider
hs.<ipui>.DirectAccessDir   Online directories > Directory for direct access
hs.<ipui>.IntKeyDir   Online directories > Corporate directory for INT key
hs.<ipui>.AutoLookupDir   Online directories > Automatic look-up
hs.<ipui>.LDAPUseSIPCredentials   LDAP authentication > Use personal provider data (SIP)
hs.<ipui>.LDAPUsername   LDAP authentication > Username
hs.<ipui>.LDAPPassword   LDAP authentication > Password
SipAccount.<ipui>.VoiceMailMailbox   Network mailbox configuration > Call number or SIP name (URI)Voicemail box number / name
SipAccount.<ipui>.VoiceMailActive   Network mailbox configuration > Activate network mailboxActivate Voicemail box
hs.<ipui>.CallManagerCallsVia  

enum: Headset, Handsfree, No

Call manager > Accept calls directly via Call Manager

hs.<ipui>.SaveMissedCalls

hs.<ipui>.SaveAcceptedCalls

 

  Missed calls and alarms > Missed/accepted calls count

hs.<ipui>.ShowMissedCalls

   Missed calls and alarms > Flashing LED (MWI) for missed calls

hs.<ipui>.ShowMissedAlarms

 

  Missed calls and alarms > Flashing LED (MWI) for missed alarms

hs.<ipui>.ShowMissedNetAM

 

  Missed calls and alarms > Flashing LED (MWI) for network mailbox
Web-interface: Settings - Mobile devices - Registration Center
    
Web-interface: Settings - Telephony - VoIP
DmGlobal.0.Port5060 1range: 1-65535SIP > SIP port (Default 5060)
DmGlobal.0.Timers_T1500  regex: ^\d{1,3}$SIP > SIP timer T1 (Default 500)
DmGlobal.0.Timers_Session1800  

regex: ^\d{1,4}$

SIP > SIP session timer(Default 1800)
DmGlobal.0.Timers_FailedRegistration300  regex: ^\d{1,4}$SIP > Failed registation registration retry timer(Default 300)
DmGlobal.0.Timers_Subscription1800  regex: ^\d{1,4}$SIP > Subscription timer (Default 1800)
DmGlobal.0.PRACK00: off
1: on		 10 = PRACK disabled
1 = PRACK enabledSIP > PRACK

DmGlobal.0.QoS_SIP_DSCP

34

  Quality of Service (QoS) > SIP ToS / DiffServ (Default 34)

DmGlobal.0.QoS_RTP_DSCP

46

  Quality of Service (QoS) > RTP ToS / DiffServ (Default 46)
Web-interface: Settings - Telephony - Audio
DmGlobal.0.WidebandEnabled010 : off
1: on		 Audio > = Wideband with codec G.722 disabled
1 = Wideband with codec G.722 disabled
Web-interface: Settings - Telephony - Call settings

Telephony.0.CT_ViaRKey

010: off
1: on 		Call Transfer > Call transfer via R key

Telephony.0.CT_ByOnHook

010: off
1: on 		Call Transfer > Transfer call by on-hook

Telephony.0.CT_AutoDetermineAddress

010: off
1: on		 Call Transfer > Determine target address automatically

Telephony.0.AccessCode

 

  Access Code > Access Code

Telephony.0.AccessCodeFor

  0 : = Outgoing calls list
1 : = Incoming calls list
2 : = LDAP
3 : = Local directory
4 : = Public net directory
5 : = Dial editor 		 Access Code > is added to numbers

AreaCodes.0.Country

Germany

 

 Area Codes > Country

AreaCodes.0.Int_Prefix

0  Area Codes > International Prefix

AreaCodes.0.Int_Code

49  Area Codes > International Area code

AreaCodes.0.Local_Prefix

0  Area Codes > Local Prefix

AreaCodes.0.Local_Code

   Area Codes > Local Area code

Telephony.0.ToneScheme

Germany

 

 Tone Selection > Tone scheme
Web-interface: Settings - Online directories - Public

XMLDir.0.ProviderName

Public

  Public Directories > Directory name

XMLDir.0.ServerURL

 

  Public Directories > Server address

XMLDir.0.Username

 

  Public Directories > Username

XMLDir.0.Password

   Public Directories > Password
Netdir.4.Activated   Public White Pages > Enable Public White Pages

XMLDir.0.WhitePagesDirName

 

  Public White Pages > Directory name

XMLDir.0.StartWithListWP

010: off
1: on 		Public White Pages > Start mode
Netdir.5.Activated   Public Yellow Pages > Enable Public Yellow Pages

XMLDir.0.YellowPagesDirName

 

  Public Yellow Pages > Directory name

XMLDir.0.StartWithListYP

010: off
1: on 		Public Yellow Pages > Start mode
Netdir.6.Activated   Public Private Pages > Enable Public Private Pages

XMLDir.0.PrivatePagesDirName

 

  Public Private Pages > Directory name

XMLDir.0.StartWithListPP

0 0: off
1: on		 Public Private Pages > Start mode
Web-interface: Settings - Online directories - Corporate

LDAPDir.0.DirName

 

  LDAP directory > Directory name
Netdir.0.Activated   LDAP directory > Enable directory

LDAPDir.0.ServerURL

   Access to the LDAP data server > Server address

LDAPDir.0.ServerPort

389 1range: 1-65535Access to the LDAP data server > Server port (Default 389)

LDAPDir.0.BaseDN

   Access to the LDAP data server > LDAP Search base (BaseDN)

LDAPDir.0.UseIndividualCredentials

010: off
1: on		 Access to the LDAP data server > Mobile device specific authentication

LDAPDir.0.Username

 

  Access to the LDAP data server > Username

LDAPDir.0.Password

 

  Access to the LDAP data server > Password

LDAPDir.0.StartWithList

010: off
1: on		 Search in LDAP database > Enable list mode

LDAPDir.0.NameFilter

(|(cn=%)(sn=%))

 

 Search in LDAP database > Name filter

LDAPDir.0.NumberFilter

(|(telephoneNumber=%)(mobile=%))

 

 Search in LDAP database > Number filter

LDAPDir.0.AdditionalFilter1Name

City

 

 Search in LDAP database > Additional filter #1 name

LDAPDir.0.AdditionalFilter1

(|(l=%))

 

 Search in LDAP database > Additional filter #1 value

LDAPDir.0.AdditionalFilter2Name

Street

 

 Search in LDAP database > Additional filter #2 name
LDAPDir.0.AdditionalFilter2

(|(street=%))

 

 Search in LDAP database > Additional filter #2 value

LDAPDir.0.DisplayName

%sn, %givenName

 

 Search in LDAP database > Display format

LDAPDir.0.MaxNrOfSearchEntries

50 regex: ^\d{1,4}$Search in LDAP database > Max. number of search results

LDAPDir.0.ItemFN

 

  Configuration of directory items > First name

LDAPDir.0.ItemLN

 

  Configuration of directory items > Surname

LDAPDir.0.ItemPH

 

  Configuration of directory items > Phone (home)
LDAPDir.0.ItemPO   Configuration of directory items > Phone (office)
LDAPDir.0.ItemPM   Configuration of directory items > Phone (mobile)

LDAPDir.0.ItemEM

 

  Configuration of directory items > E-mail

LDAPDir.0.ItemFX

 

  Configuration of directory items > Fax

LDAPDir.0.ItemCP

   Configuration of directory items > Company

LDAPDir.0.ItemST

 

  Configuration of directory items > Street

LDAPDir.0.ItemCT

   Configuration of directory items > City

LDAPDir.0.ItemZP

   Configuration of directory items > Zip

LDAPDir.0.ItemCO

 

  Configuration of directory items > Country

LDAPDir.0.ItemAA

 

  Configuration of directory items > Additional attribute

LDAPDir.0.IsAdditionalAttributeDialable

010: off
1: on		 Configuration of directory items > Additional attribute can be dialed
Online directories > XML
Web-interface: Settings - Online directories - XML
 
Web-interface: Settings - System - Web configurator
WebUIAccounts.1.Password   Change Password > New password (Admin)
   System > Provisioning and configurationCLI Password
Web-interface: Settings - System - Capacity licensing
    
Web-interface: Settings - System - Provisioning and configuration
Provisioning.global.ProvisioningServer

http://profile.gigaset.net/device/%DVID/

 

 Provisioning and configuration > Provisioning server
Web-interface: Settings - System - Security
Security.global.HTTPAuthUsername   HTTP Authentication > HTTP digest username

Security.global.HTTPAuthPassword

 

  HTTP Authentication > HTTP digest password
Web-interface: Settings - System - System log
DmGlobal.0.SysLogEnable010: off
1: on		 System log > Activate system log
DmGlobal.0.SysLogServer   System log > Server address
DmGlobal.0.SysLogServerPort514 range: 1-65535System log > Server port

StateInfo.global.DebugLevelMask

DWE D : = debug
W : = warning
E : = error
I : = info
T : = test		 System log > Log level
Web-interface: Settings - System - Date and time
DmGlobal.0.NtpServer

0.europe.pool.ntp.org,1.europe.pool.ntp.org,

2.europe.pool.ntp.org,3.europe.pool.ntp.org

  Date and time > Time server
DmGlobal.0.TimeZone timezones.txt Date and time > Timezone