Versions Compared

Old Version 18

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version 19

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Panel
titleFirst Authentication fails
Column
width50%

 

 

  1. The client receives the WEB-server challenge and gathers the required credentials. A new request is send containing the username (MAC address) and hashed secret key (MAC-ID).
  2. The WEB-server receives the request and requires an authentication. The WEB-server checks if the authentication information is in the request. The wrong authentication information is available. The WEB-server responds returning an 401 Unauthorized.
  3. The client receives the WEB-server challenge and gathers the required credentials coming from the device configuration. A new request is send containing the username and hashed secret key.

    Username = Settings - System - Security - HTTP digest username
    Password = Settings - System - Security - HTTP digest password

Column
width50%

Panel
titleSecond Authentication fails
Column
width50%



  1. The client receives the WEB-server challenge and gathers the required credentials coming from the device configuration. A new request is send containing the username and hashed secret key.
  2. The WEB-server receives the request and requires an authentication. The WEB-server checks if the authentication information is in the request. The wrong authentication information is available. The WEB-server responds returning an 401 Unauthorized.
  3. On the Maxwell display, the user can add the Username and Password Manually.


    If you press "No" key then menu will be gone after 60 seconds.
    If you press "Any" key then 60 seconds timer will be set to 0 again, 60 seconds after pressing the last key, the menu will be gone.
    To start provisioning using these credentials, you need to press the "Save" key.
    You can try 3 times, will still fails, the menu will be gone. You need to reboot or press provisioning in web-interface to get menu again.
    If entry is correct, the data is stored in the web-interface:

    Image Added
Column
width50%