Section

Introduction.

In the web-interface you can configure how the Maxwell will get the correct Date and Time settings.

Local

There is no access to any Date/Time server (NTP) in the network, locally or in the cloud. The Date and Time is set manually in the device.

You configure the Date/Time server manually via the web-interface.

This is the default setting.

Only use Use DHCP option 42 for the NTP server setting, when not send then use the NTP server send via provisioning.

Auto-provisioning parameter	Web-interface	Value
System.DateAndTime.AutoAdjustTime (Updated in the 2.22 software or higher)	Local	NTPServiceDisabled.
	Provisioning	NTPServiceEnabled
	Manual	NTPServiceManual
	DHCP Option 42	NTPServiceDHCP