Page History

Section

Panel

titleColor	#F85404
titleBGColor	#F0F0F0
title	Introduction

With the Area codes you can define how the device dials a number. Image Added

When your platform supports E.164 dialing, you need to change the settings like described below. (Use Area code = For local and National calls.)

Section

N870	Settings	Access code = 0
		Disabled	Is added always
Use Area code = NO	International Prefix = 00 International Area code = 49 Local prefix = 0 Local Area code = 76	Outgoing call 1022 = 1022 xxxxxxx = xxxxxxx 085xxxxxxx = 085xxxxxxx 004985xxxxxxx = 0049185xxxxxxx	Outgoing call / Manual 1022 = 01022 xxxxxxx = 0xxxxxxx 085xxxxxxx = 0085xxxxxxx 004985xxxxxxx = 00049185xxxxxxx
Use Area code = For local and National calls.		Outgoing call 1022 = 0049761022 xxxxxxx = 004976xxxxxxx 085xxxxxxx = 004985xxxxxxx 004985xxxxxxx = 004985xxxxxxx	Outgoing call 1022 = 00049761022 xxxxxxx = 0004976xxxxxxx 085xxxxxxx = 0004985xxxxxxx 004985xxxxxxx = 0004985xxxxxxx
Use Area code = For local calls.		Outgoing call 1022 = 0761022 xxxxxxx = 076xxxxxxx 085xxxxxxx = 085xxxxxxx 004985xxxxxxx = 004985xxxxxxx	Outgoing call 1022 = 00761022 xxxxxxx = 0076xxxxxxx 085xxxxxxx = 0085xxxxxxx 004985xxxxxxx = 0004985xxxxxxx

Info

The symbol ‚+‘ is to indicate the country code. It has to be replaced with the international dialing prefix used in the caller's location. This is usually 00. ‚+‘ is supported in the GSM network only.

‘+’ is not a “GAP-keypad Code”. (according GAP “#, *, 0 – 9” Relate to the feature dialed digits (basic) [N.4] and outgoing call [N.1], NG-DECT Part 3 (CAT-iq 2.0 ) states: “For sending digits NG-DECT Part 3 inherits the rules mandated by the GAP profile)

The digits mandated for GAP are currently editable for a number to be dialed. ‘+’ is not editable.

Currently vCards received for the local directory (e.g. via Bluetooth) with a ‘+’ within a number are converted: “00”.

Page tree

Versions Compared

Old Version 4

New Version 5

Key