Versions Compared

Old Version 6

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version 7

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleIntroduction

On this page we would like to provide more details about the Nx70 SNMP and how to use a freeware tool for testing.

  1. Download and install the freeware tool: https://www.manageengine.com/products/mibbrowser-free-tool/
  2. N670 with the IP address 192.168.178.190
  3. PC has the IP address: 192.168.178.14
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleNx70 Settings

In the Nx70 web-interface go to: SETTINGS - System - System log - SNMP statistics

Enter the SNMP manager information, in this example my PC (192.168.178.14).  

I We used the default username and password.


On this page you can also the Nx70 MIB file that you can upload on your SNMP server.

Panel
titleColor#F85404
titleBGColor#F0F0F0
titleSNMP tool settings

Import MIB file

In the tool go to: File Load MIB 

02.png


Enter login credentials.

In the tool go to: 

  • Edit - Settings
  • Select SNMP v3
  • Click on Add
  • Target Host: The IP address of the Nx70
  • Target port: The port number (161)
  • Username: The username configured in the Nx70 (admin)
  • Auth Password: The password configured in the Nx70 (snmp-admin)
  • Priv Password: The password configured in the Nx70 (snmp-admin)
  • Auth Protocol: SHA
  • Priv Protocol: CFB-AES-128


Panel
titleColor#F85404
titleBGColor#F0F0F0
titleRead SNMP Values
  • Select a base station
  • Right click and select SNMPWALK
  • You will get the supported SNMP values


Supported SNMP valuesDescription
bsMAC-xxMAC address of Base station
bsFrom-..BS start time when connection to DM
bsTo-..actual time of BS connection to DM
bsRPN-..RPN number
bsName-..name of BS
bsCl-..cluster level
bsLv-..sync level
bsConn-..Dect mac layer connection setup
bsHoIn-..Handover setup in
bsHoOut-..Handover setup out
bsCallDrop-..Call Drop
bsAsync-..BS lost DECT synchronisation
bsBusy-..Single module enter in busy state
bsDpcOff-..TCP/IP connection toward base station was lost
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleSNMP Traps

Supported traps:

  • BS synchronization status trap
  • BS online/offline status trap

In the tool enabled the Trap viewer (ALT + P)

As mention above, Nx70 supports two Traps:

trBsOnlineState (OID: .1.3.6.1.4.1.32775.2.1) → triggered when BS goes offline:

07.png


trBsSyncState (OID: .1.3.6.1.4.1.32775.2.2) → triggered when BS lost synchronization:

06.png