Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleBase stations

The Integrator/DECT manager automatically recognizes the base stations within the network. Base stations need to be confirmed, activated and synchronized. 



Panel
titleColor#F85404
titleBGColor#F0F0F0
titleBase station administration

Use the following web configurator page to assign base stations to the DECT manager.

SettingsBase stationsAdministration

There are two tables:

  1. Connected base stations lists all base stations which are already connected to the DECT manager.
  2. Pending base stations list all base stations which are not yet connected to a DECT manager.





Panel
titleColor#F85404
titleBGColor#F0F0F0
titleConnected base stations
The page shows the connected base stations with the following information:
MAC address

Hardware address of the base station. With this address the device is uniquely identified within the LAN.

Base station

Name of the base station. When added to the list the MAC address is used as name. The base station located at the same device as the DECT manager is
shown as Local. The name can be edited

RPN

(Radio Fixed Part Number) This number separates the cells in which the base station could reside from each other (maximum 7 cells). It indicates for a
mobile device how many intercell hand overs the base station is able to manage.

DECT manager

Name of DECT manager the base station belongs to. local: The base station belongs to the configuring device.

FWFirmware version currently installed.
StatusSynchronization status of the base station:

0OfflineNot available

1DeactivatedAvailable but not activated

2No SyncActivated but not synchronized

3SyncActivated and synchronized

4Sync OverloadSynchronized but DECT overload





Panel
titleColor#F85404
titleBGColor#F0F0F0
titlePending base stations

The Pending base stations list shows the automatically recognized DECT base stations in the network that have not yet been registered. To integrate them into your DECT multicell system, they need to be confirmed and activated.
The base stations are identified by their MAC address.

Assigning a base stations to your DECT manager

  • Click on in the row of the base station you want to add to your system . . . the data page for the base station is opened.


Info

The relation to a DECT manager cannot be edited and changed. To assign a base station to another DECT manager:

  • Delete it from the Connected base stations list.
  • Open a connection to the intended DECT manager.
  • Assign the base station from the base stations pending list to the DECT manager.