Versions Compared

Old Version 9

changes.mady.by.user Zimmermann, Dennis

Saved on

compared with

New Version Current

changes.mady.by.user Zimmermann, Dennis

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Panel
bgColor#FDFEFE
titleBGColor#CACFD2
titleCisco
Column
width25%

About Cisco

Cisco Systems, Inc. (known as Cisco) is an American multinational technology conglomerate headquartered in San José, California, that develops, manufactures, and sells networking hardware, telecommunications equipment, and other high-technology services and products

Column
width75%

 See below for a list with supported features when using the Gigaset PRO IP Devices on the providers network.


Feature                                            N720 Multi cell    N870 via Anynode SBC
Software release:  38V2.47.0
Basic CallYesYes
Calling line (CLIP)YesYes
Connected line (COLP)YesYes
Anonymous call--
Do Not Disturb--
Message waiting--
Call list/history

Yes

Yes
Voice mail deposit/retrieval--
Call waitingYesYes
Call Hold / ToggleYesYes
Music on Hold--
Call forward (CFU)YesYes
Call forward (CFNR)YesYes
Call forward (CFB)YesYes
Call Transfer attendedYesYes
Call Transfer unattendedYesYes
DTMF (RFC2833)YesYes
Conference 3ptyNoNo
BLF Busy / Idle indication--
Call pick-up direct  ( * 8 extension)--
Call pick-up group ( * 8 )--
Call pick-up BLFNo-
Call completed elsewhere--
Auto provisioningNoYes (via Anynode)
Info
titleImportant

N720 speciality: In the Cisco call manager the configuration is based on Trunks and not on extension. When using the extension the Cisco only allows one IP address and this causes that the N720 will not work.

See on our wiki how to configure the N720 to connect based on IP address instead of SIP registration.
Info
titleImportant

N870 speciality:

Connecting Gigaset N870 to CUCM via Anynode

Cisco CUCMSIP trunk configurationSIP profile
create a SIP profile for the SIP-Trunk to Anynode with the following parameters:
Image Removed
Image Removed
Image Removed
Image Removed
SIP Trunk Security profile
Create a SIP trunk security profile with the following parameters:
Image Removed
  • SIP trunk
    • create a SIP trunk with the parameters described below
    Image Removed
    Image Removed
    Image Removed
    Image Removed
  • Route pattern
    • Create a route pattern for the extension numbers of the DECT system and route it tot he SIP trunk we have created before:
    Image RemovedSIP route pattern:
    A SIP route pattern has to be created. It is needed for the REFER requests in case of a call transfer. The SIP route pattern needs to have the IP address of the ANYNODE SIP interface where the DECT phones are registering to (here 192.168.3.29). Is needs to be routed to the SIP trunk to Anynode we have crated before:    Image RemovedAnynode SBCGeneral configuration
    It is recommended to have 2 seperate interfaces or IP addresses on the AnyNode server. One interface is for the SIP trunk for the CUCM, the second interface is for the registration of the SIP phones. In our example we use the 192.168.3.28 for the CUCM sip trunk and we use the 192.168.3.29 as registrar for the SIP phones.    CUCM SIP trunk
    Create a SIP trunk to the CUCM as it is described in the AnyNode documentation. It is important that the correct IP address is selected in the network controller in the SIP node:
    Image Removed
    select “Network controller” and “advanced configuration” in the IP address tab:
    Image Removed
    then click on “Open”:
    Image Removed
    select the IP address you want to use for the CUCM SIP trunk. Here we use 192.168.3.28 .
    SIP registrar for the DECT phones.
    Create a SIP registrar with SIP users as described in the AnyNode system documentation. Here we use a Static User directory for the authentication. Each user has the E.164 number configured as username.
    Important for the self provisioning: The SUB ID needs to be the IPUI of the DECT handset. This is important for the auto provisioning service to work properly.
    Image Removed
    Image Removed
    Default settings for the provisioning server are used with the „Gigaset N670 & N870“ template and https.
    The default https port is 14001 here. It can be changed in the „http server“ configuration in the provisioning server menu:
    Image Removed
    Image Removed
    For a better security It is recommended to use https. With http the usernames and password of the extension numbers would be transmitted in clear text.Routing
    The routing domain has to be configured as in the following example.

    The first route with the highest priority points to the SIP phones.
    The destination dial strings come from the SIP phones directory from the SIP registrar we created before.
    The second route is pointing to the CUCM and matches with a wild card pattern (All Numbers beginning with 0-9), source nodes are the SIP phones and the CUCM. This is important for call transfers to work.

    Image Removed

    In the routing forward profile the „Telephony forwarding“ has to be configured as in the following example:
    In „SIP phones“ routing forward profile select „To SIP Trunk“ in the telephony forwarding field:

    Image Removed

    In the CUCM routing forward profile set the „telephony forwarding“ to „To CUCM“:

    Image Removed

    Number manipulation
    If you use E164 you can add some rewriting rules in the CUCM node:
    Image Removed
    Special parameters
    Some special parameters have to be set that call transfers are working correctly:
    The the SIP phones node, click on “open all” and switch to the highest detail level “+++”:
    Image Removed
    in the “call transfer” tab click on the little lock on the left and in “Blind transfer mode” select “pass the REFER along”:
    Image RemovedGo to the “To CUCM” routing forward profile, expand the detail level to (+) and select “telephony forwarding”:
    Image Removed

    View file
    nameConnecting Gigaset N870 to CUCM via Anynode.docx
    height250

    In the “signaling forwarding from calling entity to called entity” tab under “SIP refer forwarding” click on the little lock on the left and select “Enabled”  on “Forward SIP REFER requests”:’
    Image Removed 
    The same configuration has also to be done on the “SIP phones” routing forward profile.Gigaset:
    On the Gigaset device the provisioning server has to be set as in the following example:
    Image Removed
    The URL contains the MAC address of the device:
    In our example: https://[IP-Address of Anynode]:[Port configured in Anynode]/[MAC-Address N870].xml
    g.     https://192.168.3.28:14001/7C2F80E0D600.xml
    Click on “Set” and on “Start auto configuration” to download the configuration from the provisioning server.

     

    The registration of the handsets are standard. Please refer to the user manual.

     

    Appendix:
    Test environment description:IP Addresses:
    In our test environment the Anynode SBC had two IP addresses:
    192.168.3.28 was the interface for the CUCM SIP trunk
    192.168.3.29 was the interface for the SIP client registration
    192.168.3.30 was the IP address of the CUCM    Versions:CUCM version: 11.5.1.18900-97Gigaset N870 IP Pro: V2.47.0 Anynode SBC: 4.6.15 on Debian Linux
    it is recommended to use the 4.6.15 version or newer. In older versions the “REFER” parameters can not be changed.