RoutIT

Section

Column

width	50%70%

Feature
Outgoing Calls	Yes
Incoming Calls	Yes
CLIP incoming	Yes
CLIP outgoing	Yes
Call Forwarding	Yes
Call Transfer	Yes
Call Waiting	Yes
DTMF	Yes
Anonymous Call	Yes
A-number forwarding	No

Column

width	30%

bgcolor

Image Added

blue

Table of Contents

Column

width	20%

Image Removed

Example settings from provider:
Registration username:	<Phone number>
Domain:	trunktest.voipit.nl
Authentication username:	<Username> please ask RoutIT to make this the same as the Registration username, this means: <Phone number>
Authentication password:	<SIP Password>
Outbound proxy:	<IP address Outbound proxy>
Telephone numbers	085-1111111 085-1111112 085-1111113
Important is that RoutIT would like to see the domain name in the registration, but because it is now a valid domain name, this must be created manually in the local host file. Login the PBX using SSH and change the /etc/hosts file, we added the line:

...

If you see the correct IP address, than you can go further.

Gigaset T300/T500 settings.

In the Gigaset PBX go to "Configuration" - "Lines" - "Lines" and click on: Image Removed New Line

Provider settings:

Give the Line an unique name, insert the Registration username <Phone number> and Password. <SIP Password>

RoutIT Provider.jpg Image RemovedImage Added

In the Provider pull-down list, select "new.."

Use the settings below.

The fromuser field should be the same as the Registration username: <Phonenumber>
The host and fromdomain field are the same as the provider domain settings.

Image Added

RoutIT prov settings.jpg Image Removed

Number Area settings:

Just add the telephone numbers for this SIP trunk. The Country Code and Area Code can be filled in, if different than the default setting.

RoutIT number.jpg Image RemovedImage Added

Extended settings:

To enable incoming calls, you need to use the settings below.

Open the Manual Configuration and change the default settings like in the example below. Do not forget to enable the check-box Active.

RoutIT extended.jpg Image RemovedImage Added

You can copy the text below to paste into the field.

...

Info

title	Important

The above settings where to enable the SIP registration and outgoing calls, the settings below are needed to open the firewall to accept the incomings calls from this provider.