Page History

Image AddedUse this menu option to manually activate and deactivate the mode configured in the "Alarm Configuration" menu and selected in the "Operating Mode" menu. Depending on this, the menu option in Basic Mode will be called "BM Activation", in Alarm Mode "AM Activation" or in
PNG Mode "PNG Activation".

When Alarm Mode and PNG Mode are activated, a sensor test is performed first in each case (Sensor test yes/no, depends on alarm server logon response). Only the sensors that are activated in the respective mode are checked. It is only if the test has been concluded successfully that the corresponding Alarm Mode is active.

Manual activation is only possible if this has been activated for the corresponding operating mode. It is also possible to configure automatic activation.

See Section 3.2.1.2, "[Mode] Activation".

If one of the operating modes is active, the monitoring MWI LED above the display flashes green.

Procedure:

When the display is idle, press the center key three times (central key on the control key) to activate/deactivate.

Alternatively:

1. Select the Additional Features icon in the main menu.
2. Select [Mode] Activation.