Page History

You can transfer connected calls as well as calls ringing on your phone.

• When you have a call on the line, there are two ways to transfer it to a third party:
  
  
  • Announcing the call to the third party first, to make sure the call is welcome and will be accepted: Attended transfer;
    
    
  • Transferring the call unannounced: Blind transfer. There will be no feedback on whether the third party is available and/or picking up the call.
    
    
• When a call is ringing on your phone, you can transfer it to a third party without answering it first (blind transfer only).

Attended transfer

• With a single call on the phone.
  
  

1.  Put Put the call on hold. In our example, the caller on hold is 77881005.

2. Dial the number you want to transfer the call to and announce the call (Fig. 12). You can also select a number from the internal or one of the available external phone directories

3. If the third party wants to accept the call, hang-up the call OR

If the third party wants to accept the call, press Image Removed . If the screen of the call you do not want to transfer appears on-screen, press to bring the right one on-screen.
Press Image Removed Press Image Added or Image Added .

Press Image Added to complete the transfer.

With more than one call. All calls must be on hold.

1. Dial the number you want to transfer the call to and announce the call.

2. If the third party wants to accept the call, press Image Removed Image Added . If the screen of the call you do not want to transfer appears on-screen, press to bring the right one on-screen.

3. Press Image Removed Image Added. You may briefly see the "Ended" messages, indicating that the transfer was completed. The remaining call on hold or the first of the remaining calls on hold will then appear on-screen.

Blind transfer

• Blind transfer of active call
  
  
  • With a call on the line (Fig. 4), press Image Removed Image Added or Image Added. The dial screen will appear.

• • Dial the number (Fig. 45), or press to Image Added  to select a number from the internal or one of the available external phone directories

  • Press Image Removed Image Added. You may briefly see two "Ended" messages followed by the callee and caller's name/number, indicating that the transfer was completed.

Note: If a call is waiting, as indicated by the symbol Image Added in the lower right corner, you must reject it before you can transfer your active call blindly.

Press the function key underneath Image Added . The "Call Waiting" screen appears.

Press Image Added to reject the call waiting. The caller hears the busy signal.

• Blind transfer of call waiting
  
  

  • If you are in a call and want to transfer a call waiting, press the function key underneath Image Added .

    Note: Your active call will remain active while you are transferring the ringing call.
    
    

  • Press Image Removed or the function key underneath Image Removed Image Added or Image Added. The dial screen appears.
    
    

  • Enter the number of the third party you intend to transfer the call to and press Image Removed Image Added. The "Connected" screen with your active call appears.
    
    

• Blind transfer of ringing call
  
  

  • With a call ringing, press Image Removed or the function key underneath Image Removed .. Image Added or Image Added

Image AddedImage Removed

• • The dial screen appears. Enter the number of the third party you intend to transfer the call to and press Image Removed Image Added to complete the transfer.