If needed, you can start a pcap trace on the N870/N670 direct from your PC.

The trace can be made on the:

• DECT Manager + Base + Integrator
• DECT Base

Enable SSH access

First you need to enable SSH access to the system.

Open the web-interface and go to:

SETTINGS - System - Web configurator.

Image Added

Enter the Password for the SSH access.

- SSH remote Capture

Image Modified

Configure the SSH remote capture Interface for your environment:

Image Modified

Enter the IP-Adress from the device you want to capture e.g. Integrator, Dect-Manager or Bases.
And also SSH server username "cli" and your cli password on authentication tab.

Hint: after closing wireshark, or change something in the interface settings, you must reenter your password.

Image Modified

Activate "Use sudo on the remote machine".

Image Modified

please check, if the Remote capture filter is set propably by wireshark. you can force this by pressing the "Restore default value of the item" button.

Image Added

Save the settings and close the interface settings.
Now you can Start capturing directly from the remote device to your local pc.

Therefore doubleclick on the interfache, or choose the interface and click on the blue wireshark start capture button in the main tool bar.

Image Added