Page History

Image Added

Image Removed

Example of Sipgate trunking gateway settings 1/2.

Image Removed

Image Added

Example of Sipgate trunking gateway settings 2/2.

Dial command

The dial command is the command which is used in the asterisk software. The term {number:1}  means, that at the dialled number (e.g. 008987654321) the first digit is removed. If you don't use a line access code (in most cases '0' is used), you have to remove the ':1' ! ! ! In case you want to use the prefix in the outbound routes, you have to enter '{prefix} to the dial command: SIP/{prefix}{number:1}@{gateway}

Group

Select here the previously created gateway group.

Update remote party ID / P-Asserted-Identity (CLIP)

These settings are just optional, as the provider replaces outgoing CLIP which is not valid with the default number of the SIP account.

T.38 support

In order to have the best fax support on the FXS ports, you have to deactivate the T.38 support option. A fallback to G.711 will be used instead.

Advanced Parameter

You have to enter the complete term

username=12345678t9

in the value-field and press the plus-sign.

Underneath you will see then a preview of the entry in the sip.conf file.

Image Removed

Image Added

Example of Sipgate trunking Inbound routes.

Rule

Enter here a name for the according rule.

Date / Weekdays / Time

With these settings you can configure a time-controlled routing to different targets.

Pattern / Target

In the pattern you define which part of the incoming number is used to forward the call to the according extension.

Because we already receive the correct extension from the gateway group, we don't need any further number manipulation here.

In our example we forward incoming calls directly to the according extension.

The shown example is the easiest way for a block of numbers, but also other configurations or assignments are possible.

Image RemovedImage Added

Example of Sipgate trunking Outbound routes.

Rule

Enter here a name for the according rule.

Date / Weekdays / Time

With these settings you can configure a time-controlled routing.

Pattern

In the pattern you define how the outside line is seized. In our example all dialled numbers starting with '0' will use the Gateway group Sipgate trunking.