Versions Compared

Old Version 5

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version Current

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Align
alignright

Valid for:

N610

N670

N870

N870E

Embedded Integrator

Virtual Integrator

Panel
titleBGColor#F0F0F0
titleValid for N610 / N670 / N870 / N870E.

Depending on the device role the LEDs on the front side show different operational states. The LEDs can have three different colours (red, blue, green) or can be off.

 

Panel
titleColor#F85404
titleBGColor#F0F0F0
titleDECT manager and base stations
LED 1 (left)LED 2 (right)Description
OffPower off
Lights permanentlyDevice is booting
Flashes alternatingFirmware update in progress
Flashes alternating

No connection to LAN or no IP address available/assigned

FlashesOff

Connecting to DECT manager or no connection to DECT manager

Image Added

Panel
titleColor#F85404
titleBGColor#F0F0F0
titleBase station operational states
LED 1 (left)LED 2 (right)DescriptionLights permanentlyOffSuccessful connected to DM, synchronizingLights permanentlySynchronized, DECT readyLights permanentlyFlashes quicklySynchronized, DECT trafficLights permanentlyFlashes slowlySynchronized, DECT overload

Image Added

Panel
titleColor#F85404
titleBGColor#F0F0F0
titleDECT
DECT
manager (without DECT)
LED 1 (left)LED 2 (right)DescriptionLights permanentlyNo DECT base inside activeFlashes quicklyLights permanentlySystem traffic / ongoing calls

Image Added

Image Added

Panel
titleColor#F85404
titleBGColor#F0F0F0
titleDECT manager (with DECT)

Image Added

LED 1 (left)LED 2 (right)DescriptionLights permanentlyOffNot synchronized, DECT readyLights permanentlyLights permanentlySynchronized, DECT readyFlashes quicklyLights permanentlySynchronized, system traffic, no DECT trafficFlashes quicklyFlashes quicklySynchronized, DECT trafficFlashes quicklyFlashes slowlySynchronized, DECT overload
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleDisabled LED's via auto-provisioning

Via auto-provisioning you can disable the LED's on the devices.

ParameterDescription
DmGlobal.0.bLedSignallingActive

Possibility to turn the LED's on the base Off or On.

0 = LED's off
1 = LED's on

Example:

<param name="DmGlobal.0.bLedSignallingActive" value="1"/>

Panel
titleColor#F85404
titleBGColor#F0F0F0
titleDisabled LED's via the web-interface

From software 2.36 or higher it is possible to disable the LED's also via the web-interface.

In the web-interface go to: Base stations - Administration

Image Added