Versions Compared

Old Version 7

changes.mady.by.user Kopowski Thomas

Saved on

compared with

New Version Current

changes.mady.by.user Sailer, Martin

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Section
Column
width70%
Feature                                                           
Outgoing CallsYes
Incoming CallsYes
CLIP incomingYes
CLIP outgoingYes
Call ForwardingYes
Call TransferYes
Call WaitingYes
DTMFYes
Anonymous CallYes
A-number forwardingYes
Faxsee chart below---

 

 

Column
width30%

Table of Contents

...

Section
Column
width40%

Example of MyTweak Trunk gateway settings 1/3.

 

Example of MyTweak Trunk gateway settings 2/3.

 

 

Example of MyTweak Trunk gateway settings 3/3.

Column
width60%

Registrar

Enter here the DNS name of the SIP-server, here: mgw1.mytweak.at

Dial command

The dial command is the command which is used in the asterisk software.

The term {number:1}  means, that at the dialled number (e.g. 001987654321

 

 

 

) the first digit is removed. If you don't use a line access code (in most cases '0' is used), you have to remove the ':1' ! ! !

The term {prefix} is used in the outbound routes. If you have entered there a rule which uses the prefix. it will be automatically added in front of the dialled number.

Group

Select here the previously created gateway group.

From user

Type in the user like above.

Update remote party ID (CLIP)

As the A-number is not presented for forwarded calls to 3rd parties, this setting can be ignored.

Advanced Parameter

You have the possibility to enter different terms into the advanced settings. Enter terms separately into in the value-field and press the '+'-sign.

Underneath you will see then a preview of the entry in the sip.conf file.

 

 

Inbound routes

In the Gigaset PBX go to "Administration" - "Routes" - "Inbound routes" select the correct Gateway group and press Show.

...

Section
Column
width40%

Example of MyTweak Trunk Outbound routes.

Column
width60%

Rule

Enter here a name for the according rule.

Date / Weekdays / Time

With these settings you can configure a time-controlled routing.

Pattern

In the pattern you define how the outside line is seized. In our example all dialled numbers starting with '0' will use the Gateway group MyTweak Trunk.

 

Fax support - not tested completely

Following table shows you the current state (10.07.2015) of supported fax constellations. These results are without a guarantee. Due to different end-devices, configuration of PBX or other settings the fax transmission might fail. More info about fax via VoIP networks can be found here.

...