Page History

Section

Column

width	70%

Release Date:

November 2023January 2024

What is new?

EIN2B New hardware supported
- protect new Ein2b hardware to be downgraded to old SW not supporting Ein2b hardware
support
Automatic online firmware update via web-interface with link to release notes
R700H protect supported

Improvements

support
- Handset alarming functionality via MQTT interface
Length of internal numbers when using access and area codes

Improvements

DNS SRV
- Failover/Fallback improvements
Security upgrade:
EPOS/Sennheiser GAP Headsets do not correctly handle Basic-Service=Basic-Speech
Align MQTT topics with alarming API
Upgrade open SSL from version 1.1.1 to version 3.0
- Deprecated: SHA1/MD5 based certificates (are not seen as secure anymore
  - Exception for existing factory provisioning
  certificate)
  - certificates
- Block possibility of adding certs with SHA1 or MD5 based signatures
EPOS/Sennheiser GAP Headsets do not honor Basic-Service=Basic-Speech, after register this DECT headset direct to our DECT system, there is no audio
N670 mini multicell needs to be upgraded with upgrade to N870 feature level license. Show the MAC-ID in the N670 mini multicell DECT base web-interface in case (https://<IP_Addr>/dlsd-stats). This simplifies the ordering of the licenses for all N670 devices as the MAC-ID is needed to upgrade Mini multicell
Embedded Integrator reset option via web-interface offers more roles
required to order the license.
Syslog and user change time stamp should contain year by default
N610: XML file for repeater, only MAC in lower case is accepted
improve silent call based negotiation of PNCAP capabilities in a way, that it uses DOM-228 DBB Handsets shall support PNCAP PIE-RESET-CAPABILITIES, to first Reset all PNCAP capabilities
zero display line protection: not necessary; hardens the use of DECT headsets; endangers the robustness of DECT re-registration
DNS SRV
- At failover unexpected REGISTER to primary at fixed time of 25 seconds
- make ICT-Timer-B and NICT-Timer-F configurable just for some formal certification reasons
- A DNS TLL is not honored
- 25 second gap in SIP registration of account after DNS refresh
- after DNS renewal Register requests are sent to primary server
. Upper case and lower case should be supported
After DECT system software update, refresh the Handset DECT (PNCAP) functionality
GAP handset support via setting is not valid anymore, GAP handsets are supported by default
Multiple PBX Redundancy by Moved permanently or temporarily
Central Phonebook
- Enabled again for Virtual Integrator (Not possible using Embedded Integrator)
Central Phonebook for Large/Enterprise systems
- Enabled again
- Network access closed when not used (Security improvement)
- Refresh now button in webuiweb interface
- Add "search anywhere in name" option on in web
Refactor of saving to redial and call list
DeleteNotProvisionedHS disabled via parameter if internal telephony is enabled
CNIPoverLookup improvement web-interface setting
Multiple PBX Redundancy by Moved permanently or temporarily
Rearrange wildcarding in giga-ip-bs
Access code special treatment configured via webui
Migration to line-id based ringing (and other future features) by automatic PNCAP registration after firmware update with all registered and whitelisted handsets
Multi Automatic Lookup set via provisioning, but "Deactivated" on webUI
- interface
Web interface:Webui -
- For improved interoperability and robustness, ptp operation of V2.57.0 is back to two-step clock synchronisation.
Bugfixes
- Webgui is unusable after "wrong password" in SIP account.
- Autolookup in Broadsoft XSI phonebooks: Number is not replaced with the contact name
- Registration lost after maintenance using TLS
  - Transport timeout watchdog timer is not reset when 200 response is received after 408
  - If RenewConnectionAfterTimeout is triggered, it's parameter value can't be changed
- [Broadsoft N-Way ] conference: Adding conference participants is not possible when access code are is used
- SIP registration lost on FW 2.53improvements
- Access code "0" / "Always", redial is not working correctly
- After a time all handsets reply with "Busy Here" to incoming calls
- CLIP/COLP option does not show numbers starting with +MQTT bsStatus response, does not contain the name
Known Issues
- ..