Page History

Section

Info
IMPORTANT: The procedure to change the role of the device via the hardware key is only possible when the device has fully booted!

Panel

FAQ Nx70 - Role change via hardware key.With software 2.33 we have improved the role change via the hardware key on the Nx70, the following is improved:

You do not need to count the seconds anymore how long to press the hardware key to acknowledge the role change. This is done automatically.
Both LED's will turn RED to acknowledge the new role is accepted.
During shutdown and boot, both LED's will stay RED until normal start-up procedure.

Panel

titleColor	#F85404
titleBGColor	#F0F0F0
title	Example how to switch from Base to All in one role

Info
IMPORTANT: The procedure to change the role of the device via the hardware key is only possible when the device has fully booted!

Action	New	Old
Press hardware key for 10 seconds until both LED's are switched off. Device is in role change mode.	FAQ Nx70 - Role change via hardware key.	FAQ Nx70 - Role change via hardware key.
Release hardware key and right LED is GREEN. Role is DECT Base	FAQ Nx70 - Role change via hardware key.	FAQ Nx70 - Role change via hardware key.
Press hardware key and both LED's will be BLUE. Role is All in one	FAQ Nx70 - Role change via hardware key.	FAQ Nx70 - Role change via hardware key.
Press hardware key for 5 seconds to confirm the new role. With new software, after 4 seconds the role is automatic acknowledged and LED's turn RED. With old software, you do not see any LED indication that the new role is acknowledged. The LED's will stay BLUE for some time.	FAQ Nx70 - Role change via hardware key.	FAQ Nx70 - Role change via hardware key.
Device will start booting, both LED's turn RED.	FAQ Nx70 - Role change via hardware key.	FAQ Nx70 - Role change via hardware key.
Normal boot process is followed.	For LED signalling see: FAQ Nx70 - LED

Page tree