Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Align
alignright

Valid for:

N610

N670

N870

N870E

Embedded Integrator

Virtual Integrator

Panel
titleColor#F85404
titleBGColor#F0F0F0
titleIntroduction

FAQ Nx70 - Mini-multicellImage AddedThe Mini-multicell offers the possibility to create an Mini-multicell solution with up to 3 N670 devices.

  • Up to 20 DECT handsets
  • Up to 8 simultaneous calls
  • Up to 2 extra N670 base-station
  • New feature released with software 2.38.0 or higher
    Just update to the latest firmware, no license is needed
  • Create a range extension with up to 3 base-stations
  • Advantage against repeaters
    • Up to 8 simultaneous calls, against 2 when using repeater within the DECT network
    • Cascade/chaining is supported
  • Easy installation
  • LAN connection is required
  • Power via PoE or adapter
  • Handover, roaming and load balancing
  • Synchronization via DECT or LAN
  • Upgrade to Small/Medium-multicell is possible via License
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleGrow strategy - Protect your investment

To protect your investment, you can upgrade the Single/Mini-multicell system to a Small/Medium-multicell system.

In case that the customer needs:

  • More base-stations
  • More then 20 DECT handsets
  • More then 8 simultaneous calls

It is possible to upgrade the Mini-multicell to a Small/Medium-multicell system, for this you need to buy for each device an N670 UPGRADE TO N870 FEATURE LEVEL license

How to upgrade the Mini-multicell?

  • Order the N670 upgrade License
    • You need for each device to buy a separate license. License is based on the MAC address of the N670
  • On the N670 (Int-DM-Base) install the license
  • N670 base only
    • Reset the device to an N670 (Int-DM-Base), this is needed to have the N670 web-interface to install the license
    • Install the license
    • Change the role to DECT base only


The following configuration is also supported, change the role of all N670 devices to Base only.

  • N870 is the Int+DM (+Base) of this system
  • N670 devices are used as N670 base only
    • Reset the device to an N670 (Int-DM-Base), this is needed to have the N670 web-interface to install the license
    • Install the license
    • Change the role to DECT base only








Info
titleN670 as Base only without a license

An N670 that is in role Base only and does not have a N670 UPGRADE TO N870 FEATURE LEVEL License installed, can not be connected to a Small/Medium-multicell.

FAQ Nx70 - Mini-multicellImage Added