Versions Compared

Old Version 3

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version 4

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Robin Compact SIP Door intercom

section
Section
Column
width70%

Tested with: Gigaset T300/T500 PRO: Software version 4.6.5.0

Column
width70%

Robin Compact SIP: Software version 2.0.1, Software build 1307, Build type Release1.

Create SIP account in Gigaset T300/T500

Goto: Configuration - Phones - Add additional Telephones

Column
width30%

Image Removed

Table of Contents

 

...

Robinsipaccount.jpgImage Added

Use the settings like in the example above.

...

Open the Robin Compact SIP door intercom web-interface

...

 Robinbasicteleph.jpgImage Added

Section
Column
width50%

Enter the SIP username and password as defined in the Gigaset T300/T500.

The SIP domain and proxy is the IP address

...

op the Gigaset T300/T500.

...

Column

...

width

...

50%

RobinSIPacc.jpgImage Added

 

 

...

Column
width30%

Homepage-robin.pngImage Added

Table of Contents

 

  Target number:
Here you can enter the number to be dialled when the door intercom key is pressed. In this example the number 130 is called.
Image Removed 
Image Removed
Target phonebook:
Here you can define which Phonebook entry is used when the key is pressed.
Image Removed 
Image Removed
Used Codec:
Please check if the correct codecs are enabled.
Image Removed 
Image Removed
Door opener activation:
To open the door, the following default codes are tested with the Gigaset T300/T500
Image Removed
 
Gigaset User account.
Without a Gigaset user account, the door intercom can be used to dial an internal number. Incoming and Outgoing calls are not possible.
Incoming calls to the door intercom are only possible when the door intercom is assigned to a user.
In the Gigaset T300/T500 Goto: Configuration - Users and create a new user, only to be used for the door intercom (user license)Image Removed