Due to planned upgrade JIRA/Confluence may not be available on 30th October 2021 from 10am to 6pm CEST,
In case of any questions please don't hesitate to contact helpdesk@gigaset-devnet.pl

Page tree

Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 5.3


door intercom

Door Intercom


Tested with:

Gigaset T300/T500 PRO: Software version

Protalk Slim IPDP 01C: VoIP version: 1.58 UDV version: 6.0

Create SIP account in Gigaset T300/T500

Go to: Configuration - Phones - Add additional Telephones


Protalk Phone.jpgImage RemovedImage Added

Use the settings like in the example above. Always use the Password generator to create a secure Password.

Configure the Protalk door intercom

 Protalk SIP.jpgImage Removed

Image Added

SIP proxy server and SIP registrar server = IP address of the Gigaset T300/T500.

Account module Name and Auth. ID = Telephone name in Gigaset T300/T500.

Password = Password in Gigaset T300/T500.

Protalk Number.jpgImage Removed 

Image Added

Here you can define which number is dialled when the key is pressed, in this example number: 206.

Protalk audio.jpgImage Removed 

Image Added

Please check if the correct codecs are enabled.

Gigaset User account.

Without a Gigaset user account, the door intercom can be used to dial an internal number. Incoming and Outgoing external calls are not possible.

Incoming calls to the door intercom are only possible when the door intercom is assigned to a user.

In the Gigaset T300/T500 Go to: Configuration - Users and create a new user, only to be used for the door intercom (user license)

Protalk User.jpgImage Removed 

Image Added

Door intercom video integration


Gigaset T300/T500

This door intercom supports video, the config below is an example how to configure the T300/T500 that will show the door intercom video when receiving a call from the device. The T300/T500 will act as a Proxy for the DE700 and DE900 devices and will provide the Devices with the Video from the door intercom. No special programming in the DE700 and 900 Devices is needed.

Door intercom video integration

with the

Gigaset DE700 and DE900.

It When there is no Gigaset T300/T500 used, it is also possible to show the door intercom picture on the DE700 and DE900 devices release 02.00.04 and higher. You can use the following features:

  • Door intercom with video
  • Web camera

Door intercom with video

Just define the name of the device, the SIP number, DTMF door opener code, Camera URL (http:

Doorintercom with Video

//<IP address>/video.jpg) and Reload Rate.

Image Added

Web camera

Just add a Web camera with the door intercom URL (http://<IP address>/video.jpg)

Image Added

You can also use the web camera as screen-saver, under info service select the web camera you just added to the device.

Image Added





ProTalk IP door entry phone with one button and a cameraImage Modified

Table of Contents