Versions Compared

Old Version 9

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version 10

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Align
alignright

Image Modified

Image Modified

Image Modified

Image Modified

Panel
titleBGColor#F0F0F0
titleValid for N670 / N870 / N870E, but not supported by N610.

Via auto-provisioning you can add DECT base stations.


Info
iconfalse
titleProvisioning example

<?xml version="1.0" encoding="UTF-8"?>
<provisioning version="1.1" productID="e2">

<nvm>

<oper name="add_bs" value="589ec60d90ca">

<param name="DectManager" value="local"/>
<param name="name" value="viaprov"/>
<param name="ipMode" value="1"/>
<param name="ucSyncLevel" value="3"/>

</oper>


</nvm>
</provisioning>

Panel
titleColor#F85404
titleBGColor#F0F0F0
titleProvisioning parameters
ParameterDescription

<oper name="add_bs" value="589ec60d90ca">

</oper>

oper command to add an DECT base station with MAC address: 589ec60d90ca
DectManager

The name of the DECT manager where the base connects to.

  • "local" when using an all-in-one system
  • "dm1"/ "dm2" / ... when using an Integrator system
nameThe base station name
ipMode1 = DHCP / 2 = Static
ipIn case ipMode = 2 then the IP address is configured here
ucSyncLevelThe SYNC level of the base station 
ucClusterThe cluster 1 - 15
bSyncLanMaster1 = LAN master / 0 = LAN Master disabled
bActivateCellActivate base station
ucSyncModeSlaveD = DECT sync / L = LAN sync
ucTxPower1 = Reduce power  / 0 (default) = Do not reduce power 


Other example:

If you want to change the base station settings after it has been added to the system, you need to use the Parameter "ConfirmedBaseStations" and the MAC address of the DECT Base, see the example below.

Info
titleProvisioning base settings

<?xml version="1.0" encoding="UTF-8"?>
<provisioning version="1.1" productID="e2">

<nvm>

<param name="ConfirmedBaseStations.589ec60d90ca.ucSyncLevel" value="3"/>

</nvm>
</provisioning>