Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Section
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleAuto-provisioning

Following provisioning file does apply RPN=1 to all base stations of a system. In singlecell system, to the one and only local base.

(warning) DO NOT apply following provisioning file to any N670/N870/N870E.

Info
titleHow to use provisioning file to enable transparent repeater operation:
  • Provisioning is not atomic!
  • Wildcard-provisioning even more is not atomic!
  • Some settings depend on the other!

So the fully safe procedure to apply this provisioning file is to apply the provisioning twice:

  1. It is recommended to save a backup before applying the following provisioning step.
  2. Upload this provisioning file via web-ui.
  3. "Start auto configuration", should be successful, confirm by OK!
  4. Repeat step 3 - "Start auto configuration", should be successful, confirm by OK!
  5. Reboot the device. 
Info

Provisioning using wildcard "@" <param name="ConfirmedBaseStations.@.ucRpnIndex" value="0x1" /> then mostly 2 * provisioning has to be started.

Provisioning using device MAC address (<param name="ConfirmedBaseStations.589ec67c257a.ucRpnIndex" value="0x1" />) then one time provisioning is enough.

Code Block
languagexml
titleProvisioning template
<?xml version="1.0" encoding="UTF-8"?>
<provisioning version="1.1" productID="e2">
    <nvm>
 
        <!-- ATTENTION: DO NOT apply this provisioning xml to N670/N870 system!!! It will break your N670/N870 system-->

<!-- Provisioning is not atomic! ===========================================
 Provisioning is not atomic!
 Wildcard-provisioning even more is not atomic!
 Some settings depend on the other!
 So the fully safe procedure to apply this provisioning file is to apply the provisioning twice:
 1. Upload this provisioning file via web-ui.
 2. "Start auto configuration", should be successful, confirm by OK!
 3. "Start auto configuration", should be successful, confirm by OK!
 4. Reboot the device.
-->
        <param name="dm.local.LocalBaseRpn" value="1"/>
        <param name="ConfirmedBaseStations.@.ucRpnIndex" value="0x1" />
<!-- ======================================================================== -->

<!-- MAC address in lower case, without ':' separator =======================
If you want to prevent wildcard provisioning, 
you need to give the MAC address of the local base,
without ':' separators and in lower case letters:
        <param name="dm.local.LocalBaseRpn" value="1"/>
        <param name="ConfirmedBaseStations.0x589ec6123456.ucRpnIndex" value="0x1" />
======================================================================== -->
        <param name="DmGlobal.0.DECTCipherDisable" value="1" />
        <param name="DmGlobal.0.DECTEnhancedEncryption" value="0" />
        <param name="DmGlobal.0.DECTCfSettings" value="0x00" />
        <param name="DmGlobal.0.DECTBlindslots" value="0x0aaa" />
        <param name="DmGlobal.0.WidebandEnabled" value="0" />
        <param name="DmGlobal.0.DECTDSAA2" value="0" />
		
    </nvm>
</provisioning>

Examples of provisioning files

...