Versions Compared

Old Version 2

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version Current

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Column
width70%

Introduction

The Gigaset T500/T300 is based on asterisk and sometimes it is needed to change the incoming configuration of the SIP trunks, below are some examples how to change the dialplan.

Question

The incoming dialled number has extra "0" that needs to be removed.

Expand
titleClick here for solution

The normal rule in the dialplan is:

exten => _.,3,Goto(Trunk-incoming-manuell,${EXTEN},1)

To remove the first digit you need to change the rule to:

exten => _.,3,Goto(Trunk-incoming-manuell,${EXTEN:1},1)

The ":1" removes the first digit, to remove the first 2 digits you need to change it to ":2"

Example:

  • Without change: 09742123456
  • With change: 9742123456

 

With the following change you can add numbers to the incoming dialled number:

Expand
titleClick here for solution

The normal rule in the dialplan is:

exten => _.,3,Goto(Trunk-incoming-manuell,${EXTEN},1)

To remove the first digit you need to change the rule to:

exten => _.,3,Goto(Trunk-incoming-manuell,+49${EXTEN},1)

The "+49" adds the German country code to the incoming number.

Example:

  • Without change: 9742123456
  • With change: +499742123456
Column
width30%

Table of Contents