Versions Compared

Old Version 5

changes.mady.by.user Reindl Christian

Saved on

compared with

New Version Current

changes.mady.by.user Huggett, Paul

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

There are two ways to receive calls from the 2N Door Intercom. You can use the standard Phone Applikation Application on Maxwell or the 2N Helios IP Mobile App available on Google Play https://play.google.com/store/apps/details?id=cz.nn.helios_mobile&hl=de.

...

As a first step of the Configuration of 2N® Helios IP intercom Go to menu "Directory" and specify the name of this position and Number 1. This is the Phone Number of your Maxwell 10. Make sure that position of the user is Enabled. 

 


Next step is to configure the SIP Settings and connect to your IP PBX.

...

Please go to Services -> HTTP API and change the "Connection type" to Unsecure (TCP) and switch off AuthentificationAuthentication for Camera API and Switch API.

 


Maxwell 10 configuration

General configuration of door intercoms - Maxwell 10 Door Interphone

...

As a first step of the Configuration of 2N® Helios IP intercom Go to menu "Directory-Phone Book" and specify the name of this position and Number 1 in format "device:device_name" make sure that position of the user is Enabled. You also have to specify the IP Address of your Maxwell under "Helios IP Eye Address". 




If the user is set according to the picture above, then move to the section "Services-Streaming" and set  the tab called "JPEG" and allow there option "JPEG Snapshots Download" as shown in the next pictures. This possibility is available in 2N® Helios IP intercoms with firmware versions 2.6 - 2.9.1. 

 


Please go to Services -> HTTP API and change the "Connection type" to Unsecure (TCP) and switch off Authentification for Authentication for Camera API and Switch API.

 

 



As a last step in 2N® Helios IP settings go to the section Phone -> Calls and activate Automatic Pickup. 

 


Info

In order to use the "Switch" HTTP API you need to have a software license uploaded in the intercom. Without that license you have to use DTMF.

...


2N® Helios IP Mobile configuration

...

When you are connected to 2N® Helios IP Mobile running on Maxwell 10, go to section "Settings" and enter Device Name "Maxwell" which we previously specified in 2N® Helios IP intercom. If this parameter is not set correctly, you will not be able to receive calls from 2N® Helios IP! 


Now everything is set correctly and you should be able to see the video stream and receive calls from your door intercom.

 

 

...