Versions Compared

Old Version 193

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version Current

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.




Value: allowedParameter name
Web-interface: Settings - Telephony - Web-interface: Settings - Telephony - Web-interface: Settings - Telephony - Web-interface: Settings - Telephony - Web-interface: Settings - Telephony - Web-interface: Settings - Telephony - Web-interface: Settings - Telephony - Web-interface: Settings - Telephony - Value: allowedValue: allowedValue: allowedValue: allowedValue: allowedValue: allowedParameter name
Value: allowedValue: allowedParameter nameParameter nameValue: allowedValue: allowedValue: allowedValue: allowed Do not show Function key icons
1 = Show Function key icons (Default) 
Parameter nameValue: allowed
Web-interface: Settings - Network - IP
IP
NET.General.DeviceNameInNetworka-z, A-Z, 0-9, -
Address Assignment
NET.LAN.IP.DHCP.Enabled

0 = IP address type Static

1 = IP address type Dynamic (Default)

NET.IP.IPv4.Address
NET.IP.IPv4.SubnetMask
NET.IP.IPv4.StandardGateway
NET.IP.IPv4.PreferredDNSServer
NET.IP.IPv4.AlternateDNSServer
Parameter nameValue: allowed

Web-interface: Settings - Network - LAN
HTTP Proxy
NET.HTTP.ProxyServer.Active

0 = Enable proxy server No (Default)

1 = Enable proxy server Yes

NET.HTTP.ProxyServer.Address
NET.HTTP.ProxyServer.Port0 (Default) - 65535
VLAN
NET.VLAN.Tagging

0 (Default) = off
1 = LAN
2 = LAN + PC 

NET.VLAN.LAN.Identifier
NET.VLAN.LAN.Priority0 - 7
NET.VLAN.PC.Identifier
NET.VLAN.PC.Priority0 - 7
Quality of Service (QoS)
NET.QoS.RTP.DSCP0 - 64: 46 (Default)
NET.QoS.SIP.DSCP0 - 64: 34 (Default)
Link Layer Discovery Protocol (LLDP)
NET.LLDP.Active0 = Disabled
1 = Enabled (Default)
NET.LLDP.PacketInterval1 - 3600: 60 (Default)Parameter name
Web-interface: Settings - Telephony - VoIP
SIP
SIP.TransportProtocol

1 = UDP (Default)

2 = TCP

SIP.Port1 - 65535
SIP.Timers.T10 - 9999
SIP.Timers.Session90 - 9999
SIP.Timers.FailedRegistration0 - 9999
SIP.Timers.Subscription0 - 9999
SIP.Timers.FailedSubscription0 = Disabled
300 = Default 
SIP.PRACK0 = Disable
1 = Enabled
SIP.DisplayDiversionInfo.enable0 = Do not show the Diversion Info
1 (Default) = Show the Diversion Info
RTP
SIP.RTP.Port1 - 65535: 5004 (Default)
SIP.RTP.UseRandomPorts0 = Do not use random RTP ports
1 = Use random port from range <RTP.Port> - <RTP.Port+50> for RTP stream
SIP.RTP.UseSymmetricPorts0 = Disable
1 = Enabled
SIP.RTP.UseRTCP0 = Disable
1 = Enabled
SIP.RTP.UseRTCPXR

0 = Disable
1 = Enabled

SIP.RTP.RTCPXRServer.AddressRTCP XR server address
SIP.RTP.RTCPXRServer.PortRTCP XR server port
Security
SIP.Security.SRTP0 = Disable
1 = Enabled
SIP.Security.AcceptNonSRTPCalls0 = Disable
1 = Enabled
SIP.Security.UseSIPS

0 => TLS is disabled

1 => TLS is enabled, SIP scheme enabled

2 => TLS is enabled, SIPS scheme enabled

Value: allowedWeb-interface: Settings - Telephony - Connections
SIP.DefaultAccount 0 - 3 (4-5 Maxwell 4)
SIP.Accounts.Failover

0 = Do not use failover (default)
1 = Use failover

IP Connection

SIP.Account.x.AccountName

Maxwell B/2/3: x = 0 - 3
Maxwell 4: x = 0 - 5


SIP.Account.x.Active

0 = Inactive
1 = Active

SIP.Account.x.Provider
Personal Provider Data
SIP.Account.x.AuthName
SIP.Account.x.AuthPassword
SIP.Account.x.DisplayName
SIP.Account.x.Username
General Data of your Service Provider
SIP.Account.x.Domain
SIP.Account.x.ProxyServer.Address
SIP.Account.x.ProxyServer.Port1 - 65535
SIP.Account.x.RegistrationServer.Address
SIP.Account.x.RegistrationServer.Port1 - 65535
SIP.Account.x.RegistrationServer.RefreshTimer0 - 9999
Redundancy
SIP.Account.x.DNSQuery

0 = A

1 = A + SRV 

Failover Server
SIP.Account.x.FailoverServer.Enabled0 = Disabled
1 = Enabled
SIP.Account.x.FailoverServer.Address
SIP.Account.x.FailoverServer.Port
Network Data of your Service Provider
SIP.Account.x.STUN.Enabled0 = Disabled
1 = Enabled
SIP.Account.x.STUN.Address
SIP.Account.x.STUN.Port1 - 65535
SIP.Account.x.STUN.ManualNATIP address
SIP.Account.x.STUN.RefreshTimer0 - 9999
SIP.Account.x.STUN.NATRefreshTimer0 - 9999
SIP.Account.x.ICE0 = Disabled
1 = Enabled
SIP.Account.x.OutboundProxy.Mode

0 = Always
1 = Auto
2 = Never 

SIP.Account.x.OutboundProxy.Address
SIP.Account.x.OutboundProxy.Port1 - 65535

SIP.Account.x.DTMFTransmission
Maxwell B/2/3: x = 0 - 3
Maxwell 4: x = 0 - 5

0 = Audio
1 = RFC 4733
2 = Audio + RFC 4733
3 = SIP info
4 = RFC 4733 + SIP info
5 = Audio + RFC 4733 + SIP info 

IP.Account.x.AutoNegOfDTMFTransmission
Maxwell B/2/3: x = 0 - 3
Maxwell 4: x = 0 - 5

0 = Automatic DTMF transmission disabled
1 = Automatic DTMF transmission enabled

SIP.Account.x.AllowRouteHeaders

0 = Switch off
1 = Switch on 

Display of Caller Information
SIP.Account.x.CLIPSource

0 = FROM
1 = PPI + FROM
2 = PAI + PPI + FROM
3 = RPID +FROM

Parameter nameValue: allowed
Web-interface: Web-interface: Settings - Telephony - Audio
Audio
SIP.VoiceQuality

0 = Optimized for high bandwidth
1 = Optimized for low bandwidth
2 = Own codec preference

Tip

You need to use "2" Own codec preference to set available and active codecs.

SIP.ActiveCodecsThe codecs are sperated with a "," Example <param name="SIP.ActiveCodecs" value="8,9,0" />
0 = uLaw
8 = aLaw
9 = g.722
18 = G.729
109 = iLBC
115 = g.726-32 
SIP.RTP.Duration

20
30 

SIP.G729.AnnexB0 = Do not use Annex B (default)
1 = use Annex B 
Parameter nameValue: allowed
Web-interface: Settings - Telephony - Phone System
Phone System
Telephony.PhoneSystem.Type

0 = Standard (Default)
1 = Gigaset T640/T440
3 = Hybird 120 GE
4 = Starface
5 = Broadsoft (V2.11.x needed)
6 = Teles (2.21.x needed)
11 = Vodafone
13 = Vodia
Peoplefone

Web-interface: Settings - Telephony - Phone System - Broadsoft
BLF
Telephony.PhoneSystem.BLFURLBroadsoft BLF URL
Telephony.PhoneSystem.Broadsoft.BLF.AutomaticFKFilling.Enabled0 = Manual Broadsoft BLF creation
1 = Automatic Broadsoft BLF creation
Telephony.PhoneSystem.Broadsoft.BLF.CallPickupCodeBroadsoft Call Pick up Feature code via blinking BLF key
Broadsoft services
Telephony.PhoneSystem.XSI.ServerXSI Server URL
Telephony.PhoneSystem.XSI.SIPAuthentication0 = XSI username and Password
1 = SIP authentication
Telephony.PhoneSystem.XSI.AuthNameXSI Username
Telephony.PhoneSystem.XSI.AuthPasswordXSI Password
Telephony.PhoneSystem.XSI.SearchAnywhereInName.Enabled0 = Disabled
1 = Enabled
Telephony.PhoneSystem.Broadsoft.Lookup.Incoming0 = Disabled
1 = Enabled
Telephony.PhoneSystem.Broadsoft.Lookup.Outgoing0 = Disabled
1 = Enabled
Personal
Telephony.PhoneSystem.XSI.PersonalDirectory.Enabled0 = Disabled
1 = Enabled
Telephony.PhoneSystem.XSI.PersonalDirectory.NameName of the personal Directory
Group
Telephony.PhoneSystem.XSI.GroupDirectory.Enabled0 = Disabled
1 = Enabled
Telephony.PhoneSystem.XSI.GroupDirectory.NameName of the Group Directory
Group Common
Telephony.PhoneSystem.XSI.GroupCommonDirectory.Enabled0 = Disabled
1 = Enabled
Telephony.PhoneSystem.XSI.GroupCommonDirectory.NameName of the Group Common Directory
Enterprise
Telephony.PhoneSystem.XSI.EnterpriseDirectory.Enabled0 = Disabled
1 = Enabled
Telephony.PhoneSystem.XSI.EnterpriseDirectory.NameName of the Enterprise Directory
Enterprise Common
Telephony.PhoneSystem.XSI.EnterpriseCommonDirectory.Enabled0 = Disabled
1 = Enabled
Telephony.PhoneSystem.XSI.EnterpriseCommonDirectory.NameName of the Enterprise Common Directory
Call log
Telephony.PhoneSystem.XSI.CallLogType0 = Basic Call log
1 = Enhanced Call log
Automatic Call Distribution (ACD)
Telephony.PhoneSystem.Broadsoft.ACD.Enabled

0 = ACD Disabled
1 = ACD Enabled

Telephony.PhoneSystem.Broadsoft.ACD.Status0 = Agent un-available after login
1= Agent available after login
Flexible Seating
Telephony.PhoneSystem.Broadsoft.FlexibleSeating.Enabled0 = Disabled
1 = Enabled		Parameter name
Web-interface: Settings - Telephony - Call Settings
Call Transfer
Telephony.CallTransfer.AutoDetermineAddress

Enabled

Disabled

Telephony.CallTransfer.SemiAttendedTransferType

0 = Early attended 

1 = Semi-attended

Telephony.CallTransfer.HoldOnTransfer.Attended

Enabled
Disabled

Telephony.CallTransfer.HoldOnTransfer.Unattended

Enabled
Disabled

Telephony.CallTransfer.DeriveTargetAddresssipurl, sipcontact
Access Code
Telephony.AccessCode.CodeAccess code 
Telephony.AccessCode.EnabledNot used
Telephony.AccessCode.For

0 = Never
1 = For directories
2 = For call lists
3 = For directories and Call lists
4 = Always

Telephony.AccessCode.InternalNumberLengthSet the length for internal numbers 0 - 9
Area Codes
Telephony.AreaCodes.CountryOther,ALB,ARG,AUS,AUT,BHR,BLR,BEL,BOL,BIH,BRA,BGR,CAN,CHL,
CHN,COL,CRI,HRV,CYP,CZE,DNK,ECU,EGY,EST,FIN,FRA,DEU,GRC,HKG,
HUN,ISL,IND,IDN,IRN,IRL,ISR,ITA,JPN,JOR,KWT,LVA,LBN,LIE,LTU,LUX,
MKD,MYS,MEX,MNE,MAR,NAM,NLD,NZL,NOR,PAK,PSE,PAN,PRY,PER,
PHL,POL,PRT,PRI,ROU,RUS,SAU,SRB,SGP,SVK,SVN,ZAF,KOR,ESP,SWE,
CHE,TWN,THA,TUR,ARE,GBR,USA,URY,VEN,VNM
Telephony.AreaCodes.Int.Prefix
Telephony.AreaCodes.Int.Code
Telephony.AreaCodes.Local.Prefix
Telephony.AreaCodes.Local.Code
Tone Selection
Telephony.ToneSchemeINT,AUT,CAN,CZE,DNK,EGY,FIN,FRA,DEU,GRC,NLD,POL,PRT,ROU,
ZAF,RUS,SAU,SVK,ESP,SWE,CHE,ARE,GBR,USA,ITA
Telephony.DialTone.Enabled0 = Disabled
1 = Enabled
Call Waiting
SIP.Account.0-3.CallWaiting0 = Disabled
1 = Enabled
SIP.Account.0-3.CallWaitingSignal

Off
SingleBeep
BeepEvery4
BeepEvery10
BeepEvery20

WebUI.CallSettings.CallWaiting.DisableHide Call waiting in Web-UI
Count Calls / Voicemails
SIP.Account.0-3.CountMissedAcceptedCalls

0 = Missed calls disabled
1 = Missed call enabled (default)

Count Calls / Voicemails
Telephony.Speechpath.CallsViaCallManager

0 = No
1 = Headset
2 = Handsfree

Telephony.Speechpath.IncCallsWithoutCallManager

0 = No
1 = Headset
2 = Handsfree

Telephony.Speechpath.OutCallsViaFunctionKey

1 = Headset
2 = Handsfree

Parameter name

Call Pickup Group
Telephony.CallPickupGroup.Enabled0 = Disabled
1 = Enabled
Telephony.CallPickupGroup.Code
Telephony.CallPickupGroup.Ringtone
Telephony.CallPickupGroup.RingingMode0,1,2
Telephony.CallPickupGroup.SubscribedAccount
Web-interface: Settings - Telephony - Call Divert
All Calls
Telephony.CallDivert.0-3.All.Active0 = Disabled
1 = Enabled
Telephony.CallDivert.0-3.All.VoiceMail0 = Disabled
1 = Enabled
Telephony.CallDivert.0-3.All.Target

Phonenumber where all calls are diverted to.

Telephony.CallDivert.0-3.All.VoiceMail should be set to 0 to use this feature.

When Busy
Telephony.CallDivert.0-3.Busy.Active0 = Disabled
1 = Enabled
Telephony.CallDivert.0-3.Busy.VoiceMail0 = Disabled
1 = Enabled
Telephony.CallDivert.0-3.Busy.Target

Phonenumber where all calls are diverted to when device is busy.

Telephony.CallDivert.0-3.Busy.VoiceMail should be set to 0 to use this feature.

No Answer
Telephony.CallDivert.0-3.NoAnswer.Active0 = Disabled
1 = Enabled
Telephony.CallDivert.0-3.NoAnswer.Delay5,10,15,20,25,30,45,60,90,120 (Default)
Telephony.CallDivert.0-3.NoAnswer.VoiceMail

0 = Disabled
1 = Enabled

Telephony.CallDivert.0-3.NoAnswer.Target

Phonenumber where all not answered calls are diverted to.

Telephony.CallDivert.0-3.Busy.VoiceMail should be set to 0 to use this feature.

WebUI.CallDivert.DisableHide Call Divert from Web-UI
0 = Disabled
1 = Enabled		Parameter name
Web-interface: Settings - Telephony - Do not Disturb
Do not Disturb
Telephony.DnD.Active0 = Disabled
1 = Enabled
Telephony.DnD.List.Active

0 = Disabled
1 = Enabled
Telephony.DnD.List.0-49.Name
Telephony.DnD.List.0-49.Number
Telephony.DnD.AnonymousCallBlock0 = Disabled
1 = Enabled
Parameter nameValue: allowed
WebWeb-interface: Settings - Telephony - Dialing Plans
Dialling Plans
Telephony.DiallingPlans.List.0-19.Number
Telephony.DiallingPlans.List.0-19.UseAreaCode0 = Disabled
1 = Enabled
Telephony.DiallingPlans.List.0-19.Connection
Telephony.DiallingPlans.List.0-19.Comment
Telephony.DiallingPlans.List.0-19.Active0 = Disabled
1 = Enabled
Call Barring
Telephony.CallBarring.List.0-19.Number
Telephony.CallBarring.List.0-19.Comment
Telephony.CallBarring.List.0-19.Blocked0 = Disabled
1 = Enabled
Web-interface: Settings - Telephony - Phone Lock
See: FAQ Maxwell - Locking/unlocking the keypad / Emergency numbersParameter name
Web-interface: Settings - Telephony - Voicemail
Voicemail
SIP.Account.0-3.VoiceMail.Active0 = Disabled
1 = Enabled
SIP.Account.0-3.VoiceMail.MailboxParameter name
Web-interface: Settings - Online Directories - CorporateLDAP
LDAP Directory
NetDir.LDAP.0.DirectoryName
NetDir.LDAP.0.Enable

0 = Disabled
1 = Enabled 

NetDir.LDAP.0.Lookup

0 = Disabled
1 = Enabled 

It works only if the LDAP directory is enabled.

Access to the LDAP Data Server
NetDir.LDAP.0.Server.Address
NetDir.LDAP.0.Server.Port1 - 65535
NetDir.LDAP.0.BaseDN
NetDir.LDAP.0.Username
NetDir.LDAP.0.Password
NetDir.LDAP.0.ResponseTimeout1 - 10
NetDir.LDAP.0.Security

0 = Off
1 = TLS start
2 = LDAPs

Search in LDAP Data Base
NetDir.LDAP.0.NameFilter
NetDir.LDAP.0.NumberFilter
NetDir.LDAP.0.DisplayFormat
NetDir.LDAP.0.MaxNumberOfSearchResults
NetDir.LDAP.0.FirstName
NetDir.LDAP.0.Surname
NetDir.LDAP.0.PhoneHome
NetDir.LDAP.0.PhoneOffice
NetDir.LDAP.0.PhoneMobile
NetDir.LDAP.0.Email
NetDir.LDAP.0.Fax
NetDir.LDAP.0.Company
NetDir.LDAP.0.Street
NetDir.LDAP.0.City
NetDir.LDAP.0.ZIP
NetDir.LDAP.0.Country
NetDir.LDAP.0.AdditionalAttribute
NetDir.LDAP.0.AdditionalAttributeDialable

Yes

No

Parameter name

Web-interface: Settings - Online Directories - XML
Directory via XML protocol
NetDir.Xml.0.ProviderName
NetDir.Xml.0.ServerAddress
NetDir.Xml.0.Username
NetDir.Xml.0.Password
NetDir.Xml.0.NumberFilterbp
NetDir.Xml.0.LookupIncomming0 = Disabled
1 = Enabled 
NetDir.Xml.0.LookupOutgoing0 = Disabled
1 = Enabled 
Private Online Directory
NetDirNetDir.Xml.0.EnablePrivateDirectory0 = Disabled
1 = Enabled 
NetDir.Xml.0.PrivateDirectoryName
White Pages
NetDir.Xml.0.EnableWhiteDirectory0 = Disabled
1 = Enabled 
NetDir.Xml.0.WhiteDirectoryName
Yellow Pages
NetDir.Xml.0.EnableYellowDirectory0 = Disabled
1 = Enabled 
NetDir.Xml.0.YellowDirectoryName
Web-interface: Settings - Online Services - Doorstation
Door Station
NetSrv.DoorStations.0-19.Name
NetSrv.DoorStations.0-19.SIPID
NetSrv.DoorStations.0-19.DTMFCode
NetSrv.DoorStations.0-19.Username
NetSrv.DoorStations.0-19.Password
NetSrv.DoorStations.0-19.CameraURLThis parameter is ignored by Maxwell 2
NetSrv.DoorStations.0-19.PictureRefreshTime

Time in msec, see below for the allowed values.

500 = 2 fps
200 = 5 fps
100 = 10 fps
67 = 15 fps

This parameter is ignored by Maxwell 2

Web-interface: Settings - Desk Phone - Main Menu
Main Menu
System.MainMenu.Content

Standard (Default)
User defined

Parameter nameValue: allowed
Web-interface: Settings - Desk Phone - Ringtones
Ringtones
SIP.DefaultRingtoneFor values, see list below.
SIP.Account.0-3.Ringtone.External

06_Gigaset.mp3 (or .wav)

Attention: Full-path will be optional from version 2.19.x. Then the filename will be sufficient to set the ringtone. Until version 2.18.4 the full path is still necessary.

Expand
titleList with Ringtones
Name in UI/Web-UI
Filename
From software 2.24.12
0101.wav01.mp3 (or .wav)
02_Memo02_Memo.wav02_Memo.mp3 (or .wav)
03_Vibe03_Vibe.wav03_Vibe.mp3 (or .wav)
04_Listen04_Listen.wav04_Listen.mp3 (or .wav)
05_Down05_Down.wav05_Down.mp3 (or .wav)
06_Gigaset06_Gigaset.wav06_Gigaset.mp3 (or .wav)
07_Egg07_Egg.wav07_Egg.mp3 (or .wav)
08_Peak08_Peak.wav08_Peak.mp3 (or .wav)
09_Step09_Step 3.wav09_Step 3.mp3 (or .wav)
10_P Cut10_P Cut.wav10_P Cut.mp3 (or .wav)
11_Set11_Set.wav11_Set.mp3 (or .wav)
12_Sim12_Sim.wav12_Sim.mp3 (or .wav)
13_Tone one13_Tone one.wav13_Tone one.mp3 (or .wav)
14_Dunken14_Dunken.wav14_Dunken.mp3 (or .wav)
15_Piano15_Piano.wav15_Piano.mp3 (or .wav)
16_Officebuffer16_Officebuffer.wav16_Officebuffer.mp3 (or .wav)
17_Twelve17_Twelve.wav17_Twelve.mp3 (or .wav)
18_Flightzone18_Flightzone.wav18_Flightzone.mp3 (or .wav)
19_Waste19_Waste.wav19_Waste.mp3 (or .wav)
20_Smototh G20_Smooth_G.wav20_Smooth_G.mp3 (or .wav)
21_Green Tea21_Green Tea.wav21_Green Tea.mp3 (or .wav)
22_Evolve 122_Evolve 1.oggEvolve 1.ogg
23_Evolve 223_Evolve 2.oggEvolve 2.ogg
Bellcore 1bellcore_dr1.oggbellcore_dr1.ogg
Bellcore 2bellcore_dr2.oggbellcore_dr2.ogg
Bellcore 3bellcore_dr3.oggbellcore_dr3.ogg
Bellcore 4bellcore_dr4.oggbellcore_dr4.ogg
Bellcore 5bellcore_dr5.oggbellcore_dr5.ogg
SIP.Account.0-3.Ringtone.HeaderExternal<http://www.notused.com>;info=alert-external
SIP.Account.0-3.Ringtone.InternalSee: SIP.Account.0-3.Ringtone.External
SIP.Account.0-3.Ringtone.HeaderInternal<http://www.notused.com>;info=alert-internal
SIP.Account.0-3.Ringtone.GroupSee: SIP.Account.0-3.Ringtone.External
SIP.Account.0-3.Ringtone.HeaderGroup<http://www.notused.com>;info=alert-group
SIP.Account.0-3.Ringtone.DoorstationSee: SIP.Account.0-3.Ringtone.External
SIP.Account.0-3.Ringtone.HeaderDoorstation <http://www.notused.com>;info=alert-door
SIP.Account.0-3.Ringtone.OptionalSee: SIP.Account.0-3.Ringtone.External
SIP.Account.0-3.Ringtone.HeaderOptionalParameter name
Web-interface: Settings - Desk Phone - Display (Depends on phone type if supported)
Display
PhoneUI.Settings.Language

en-us (Default)

Expand
titleComplete list

de-de

fr-fr

es-es

it-it

nl-nl

tr-tr

pt-pt

el-gr

da-dk

sv-se

no-no

cs-cz

pl-pl

sl-sl

ro-ro

ru-ru

PhoneUI.Settings.ScreenSaverTimeout0,10,20 (Default),30,40,50,60
PhoneUI.Settings.ColorScheme.Tree

(Maxwell 3):
0 - White on Black (see main screen then)
1 - White on Blue (see main screen then)
2 - White on Red (see main screen then)
3 - White on Green (see main screen then)

This parameter is ignored by Maxwell 2

PhoneUI.Settings.ColorScheme.Basic

(Maxwell Basic):
4 - White on Black (see main screen then)
5 - Black on White (see main screen then)

PhoneUI.Settings.Backlight1 - 9: 7 (Default)
PhoneUI.Settings.Contrast1 - 9: 5 (Default)
PhoneUI.Settings.BacklightTimeout1 - 120: 5 (Default): Value is in minutes
PhoneUI.Settings.ScreenSaverSelection

0 = Analog clock
1 = Digital clock
2 = Pictures
3 = HTTP source
Maxwell 2 only supports values 0 and 1

PhoneUI.Settings.ScreenSaverHTTPSourceThis parameter is ignored by Maxwell 2
PhoneUI.Settings.SelectedWallpapersOnly Maxwell 4: See FAQ Maxwell - Background picture.
Parameter nameValue: allowed
Web-interface: Settings - Desk Phone - Message Notification
Night Mode
IsNightModeEnabled

0 = Disabled

1= Enabled

NightModeStartTimeStart time in format: HH:MM
NightModeEndTimeEnd time in format: HH:MM
IsNightModeSilencingCalls

0 = Disabled

1= Enabled

Web-interface: Settings - Desk Phone - Message Notification
Visual Call Notification (LED)
Telephony.VoiceMail.VoicemailMessages.Active0 = Disabled
1 = Enabled
Calls.Missed.Notification.Active0 = Disabled
1 = Enabled
SIP Notification
PhoneUI.SIP.ShowSIPMessagesOnDisplay0 = Disabled
1 = Enabled
PhoneUI.SIP.ClearSIPMessageWithBackKey0 = Disabled
1 = Enabled
Parameter nameValue: allowed

Web-interface: Settings - Desk Phone - Keys and LEDs


Programmable Keys
PhoneUI.Keys.ProgrammableKeys.Center.Type

0 = Default
1 = XHTML

PhoneUI.Keys.ProgrammableKeys.CallLog.TypeTelephony.ShowKeysDisplayName0 = DisabledDefault
1 = EnabledXHTML
PhoneUI.Keys.ProgrammableKeys.Directory.Type

1 = LDAP
3 = XML white pages
4 = Local directory
5 = XML yellow pages
6 = XML Private directory
7 = XSI Personal
8 = XSI Group
9 = XSI Group Common
10 =XSI Enterprise 
11 = XSI Enterprise Common
12 = XHTML

PhoneUI.Keys.ProgrammableKeys.Messages.Type

0 = Default
1 = FAC
2 = Action URL
3 = XHTML

PhoneUI.Keys.ProgrammableKeys.Messages.FAC
PhoneUI.Keys.ProgrammableKeys.Messages.ActionURL
PhoneUI.Keys.ProgrammableKeys.DND.Type

0 = Default

1 = FAC

2 = Action URL

= XHTML

PhoneUI.Keys.ProgrammableKeys.DND.FAC.enable
PhoneUI.Keys.ProgrammableKeys.DND.FAC.disable
PhoneUI.Keys.ProgrammableKeys.DND.ActionURL.enable
PhoneUI.Keys.ProgrammableKeys.DND.ActionURL.disable
PhoneUI.Keys.ProgrammableKeys.Hold.Type

0 = Default

1 = DTMF code

2 = Action URL

PhoneUI.Keys.ProgrammableKeys.Hold.DTMFCode
PhoneUI.Keys.ProgrammableKeys.Hold.ActionURL
PhoneUI.Keys.ProgrammableKeys.Conference.Type

0 = Default

1 = DTMF code

2 = Action URL

3= FAC

PhoneUI.Keys.ProgrammableKeys.Conference.DTMFCode
PhoneUI.Keys.ProgrammableKeys.Conference.ActionURL
PhoneUI.Keys.ProgrammableKeys.Conference.FAC
Soft Keys

PhoneUI.Keys.SoftKeys.X.Type

Maxwell B/ 2/ 3 / 4  X=0 Left SoftKey, X=1 Right Softkey

Maxwell 4 X = 2 and X = 3 for the Soft keys in the middle

-1 = No function
3 = Quick Dial
5 = SIP URL
8 = Action URL
9 = SIP INFO
10 = FAC
11 = Call Waiting
12 = Local Directory
13 = Ldap Directory
14 = Xml Public
15 = Xml Yellow
16 = Xml Private
17 = Redial
18 = Select Line
22 = XSI Personal Directory
23 = XSI Group Common Directory
24 = XSI Group Directory
25 = XSI Enterprise Common Directory
26 = XSI Enterprise Directory

PhoneUI.Keys.SoftKeys.X.Action

X = 0 - 3

Only Valid for:

  • SIP INFO

PhoneUI.Keys.SoftKeys.X.Connection

X = 0 - 3

Only Valid for:

  • Quick Dial

PhoneUI.Keys.SoftKeys.X.DisableCode

X = 0 - 3

Only Valid for:

  • FAC

PhoneUI.Keys.SoftKeys.X.DisableName

X = 0 - 3

Only Valid for:
  • SIP INFO
  • FAC

PhoneUI.Keys.SoftKeys.X.EnableCode

X = 0 - 3

Only Valid for:

  • FAC

PhoneUI.Keys.SoftKeys.X.EnableName

X = 0 - 3

Only Valid for:

  • Quick Dial
  • SIP URI
  • Action URL
  • SIP INFO
  • FAC

PhoneUI.Keys.SoftKeys.X.PhoneNumber

X = 0 - 3

Only Valid for:

  • Quick Dial

PhoneUI.Keys.SoftKeys.X.URL

X = 0 - 3

Only Valid for:
  • SIP URI
  • Action URL

SoftKeys.X.Active

X = 0 - 3

0 = When SoftKey is FAC then change to disabled
1 = When SoftKey is FAC then change to enabled

It will only change the key status, the device does not send the FAC.

Parameter nameValue: allowed
Quick Dial Keys
PhoneUI.Keys.QuickDialKeys.X.Type
x = 1,2,3,4 

0 - Default
1 - QuickDial
2 - FAC
3 - ActionURL

PhoneUI.Keys.QuickDialKeys.X.Number
x = 1,2,3,4		0 - Default
1 - QuickDial
2 - FAC
3 - ActionURL

PhoneUI.Keys.QuickDialKeys.X.FAC
x = 1,2,3,4 

0 - Default
1 - QuickDial
2 - FAC
3 - ActionURL
PhoneUI.Keys.QuickDialKeys.X.ActionURL
x = 1,2,3,4		0 - Default
1 - QuickDial
2 - FAC
3 - ActionURL		Value: allowed
Function keys (Only Maxwell 3)
Function Keys - Configuration
Telephony.ShowKeysDisplayName0 = Disabled
1 = Enabled
PhoneUI.Keys.FunctionKeys.Icons0 = Do not show Function key icons
1 = Show Function key icons (Default) 
PhoneUI.Keys.FunctionKeys.Indicator
0 = Thin
1 = Bold 
Function Keys - Idle Screen

PhoneUI.Keys.FunctionKeys.X.Type

Maxwell 2 and 3: X = (Function key) 0 - 7

Expansion module 1 level 1: X = (Function key) 8 - 36
Expansion module 1 level 2: X = (Function key) 37 - 65

Expansion module 2 level 1: X = (Function key) 66 - 94
Expansion module 2 level 2: X = (Function key) 95 - 123

Expansion module 3 level 1: X = (Function key) 124 - 152
Expansion module 3 level 2: X = (Function key) 153 - 181

Maxwell 4: X = (Function key) 0 - 37

Expansion module 1 level 1: X = (Function key) 38 - 66
Expansion module 1 level 2: X = (Function key) 67 - 95

Expansion module 2 level 1: X = (Function key) 96 - 124
Expansion module 2 level 2: X = (Function key) 125 - 153

Expansion module 3 level 1: X = (Function key) 154 - 182
Expansion module 3 level 2: X = (Function key) 183 - 211

-1 (No Function)

0 (Line, not for Expansion module)

1 (Shared Line, not for Expansion module)

2 (Park + Retrieve, not for Expansion module)

3 (Quick Dial)

4 (BLF)

5 (SIP URI)

6 (Call Divert, not for Expansion module)

7 (DTMF)

8 (Action URL)

9 (SIP INFO)

10 (FAC)

PhoneUI.Keys.FunctionKeys.X.DisplayName

Maxwell 2, 3 and 4: X = (Function key) 0 - 7

0-9, a-z, A-Z, *, @ , etc.

PhoneUI.Keys.FunctionKeys.X.Connection

Maxwell 2, 3 and 4: X = (Function key) 0 - 7

SIP account 0 (1) - 3 (4)

Valid for:

  • Line
  • Shared Line
  • Park and Retrieve
  • Quick Dial
  • BLF
  • Call Divert
  • SIP Info

PhoneUI.Keys.FunctionKeys.X.PhoneNumber

Maxwell 2, 3 and 4: X = (Function key) 0 - 7



Valid for:

  • Park and Retrieve
  • Quick Dial
  • BLF
  • Call Divert

PhoneUI.Keys.FunctionKeys.X.CallPickupCode

Maxwell 2, 3 and 4: X = (Function key) 0 - 7

Valid for:

  • BLF

PhoneUI.Keys.FunctionKeys.X.URL

Maxwell 2, 3 and 4: X = (Function key) 0 - 7

Valid for:

  • SIP URI
  • Action URI

PhoneUI.Keys.FunctionKeys.X.CallDivertType

Maxwell 2, 3 and 4: X = (Function key) 0 - 7

Valid for:

  • Call Divert

PhoneUI.Keys.FunctionKeys.X.EnableCode

Maxwell 2, 3 and 4: X = (Function key) 0 - 7

Valid for:

  • DTMF
  • FAC

PhoneUI.Keys.FunctionKeys.X.DisableCode

Maxwell 2, 3 and 4: X = (Function key) 0 - 7

Valid for:

  • FAC

PhoneUI.Keys.FunctionKeys.X.DTMFCode

Maxwell 2, 3 and 4: X = (Function key) 0 - 7

Available in Maxwell 3 and 4
Valid for:

  • DTMF

PhoneUI.Keys.FunctionKeys.X.Action

Maxwell 2, 3 and 4: X = (Function key) 0 - 7

Valid for:

  • SIP INFO

PhoneUI.Keys.FunctionKeys.X.Color

Maxwell 2, 3 and 4: X = (Function key) 0 - 249



"0" -> Red
"1" -> Green
"2" -> Yellow
"3" -> Standard

This parameter is ignored by Maxwell 2 for the main-device keys.

Only expansion module keys can be used with multi-color.

Function keys for expansion module see here
Parameter nameValue: allowed

Web-Web-interface: Settings - Desk Phone - Events
URL Links for Events
System.Events.RegistrationSuccessed
System.Events.RegistrationFailed
System.Events.ConnectionEstablished
System.Events.ConnectionTerminated
System.Events.OffHook
System.Events.OnHook
System.Events.IncomingCall
System.Events.OutgoingCall
Web-interface: Settings - Desk Phone - Local Phonebook See wiki article
Load Phonebook from URL
System.LocalPhonebook.Url
System.LocalPhonebook.UpdateTime08:00
Display
System.LocalPhonebook.Name
PhoneUI.Directory.Local.SearchAnywhere0 = No
1 = Yes
PhoneUI.Directory.Local.NameFirst0 = Surname, Name
1 = Name, Surname		Value: allowed
Web-interface: Settings - Web Configurator
WebUI.AdminPassword
WebUI.UserPassword
WebUI.ShowPassword
WebUI.AllowAccessWeb0 = Allow access from a different subnet
1 = No access from different subnet (Default)		Parameter name
Web-interface: Settings - System - Phone Web Server
HTTP Server

HTTP.ConnectionType

HTTP (Default)
HTTPS
HTTP_HTTPS

HTTP.Port1 - 65535: 80 (Default)
HTTP.SecurePort1 - 65535: 443 (Default)
WebUI.LogoutTimer1 - 60: 10 (Default)Parameter name
Web-interface: Settings - System - Provisioning and Configuration

PhoneUI.Provisioning.ShowInProgressOnDisplay

(Parameter is not in web-interface)

0 = Do not show "Provisioning in Progress" on Display.

1 = Show "Provisioning in Progress" on Display. (Default)

Auto Provisioning
System.Provision.ProvisioningServerhttp://profile.gigaset.net/device/%DVID/ (Default)
Web-interface: Settings - System - Firmware Update
Firmware Update
FirmwareManagment.AutomaticCheckForUpdates

0 = Automatic check for updates is "No"

1 = Automatic check for updates is "Yes"

System.Provision.Period

(Parameter is not in web-interface)

0 (Default) =  Random value between 1:00 and 4:00 am

Minimum time is 600 seconds.
If you configure the time <600 and > 0 then it can be that during manual testing provisioning, the
device will wait until the 600 seconds are passed and with the correct setting this
will not happen. 

Maximum time is 86400 seconds

Parameter nameValue: allowed
Web-interface: Settings - System - Security
System.Security.AcceptAllCertificates

0 = Accept all certificates No (Default)

1 = Accept all certificates Yes

System.Security.HTTPAuthUsername
System.Security.HTTPAuthPasswordParameter name
Web-interface: Settings - System - Date and Time
System.DateAndTime.AutoAdjustTime
(Updated in the 2.22 software or higher)

NTPServiceDisabled = Setting "Local" in web-interface, time is set manually.
NTPServiceEnabled = NTP server via provisioning, if not send then use DHCP option 42
NTPServiceManual = NTP server is entered manually via the web-interface.
NTPServiceDHCP = Use DHCP option 42, if not send then use NTP server via provisioning.

System.DateAndTime.TimeServer

pool.ntp.org (Default)
System.DateAndTime.TimeZone

GMT+1.Europe/Amsterdam


Expand
titleComplete list

GMT-11.Pacific/Midway
GMT-10.Pacific/Honolulu
GMT-9.America/Anchorage
GMT-8.America/Los_Angeles
GMT-8.America/Tijuana
GMT-7.America/Phoenix
GMT-7.America/Chihuahua
GMT-7.America/Denver
GMT-6.America/Costa_Rica
GMT-6.America/Chicago
GMT-6.America/Mexico_City
GMT-6.America/Regina
GMT-5.America/Bogota
GMT-5.America/New_York
GMT-4.America/Barbados
GMT-4.America/Halifax
GMT-4.America/Manaus
GMT-3.America/Sao_Paulo
GMT-3.America/Argentina/Buenos_Aires
GMT-3.America/Godthab
GMT-3.America/Montevideo
GMT-3.America/Santiago
GMT-2.Atlantic/South_Georgia
GMT-1.Atlantic/Azores
GMT-1.Atlantic/Cape_Verde
GMT.Africa/Casablanca
GMT.Europe/London
GMT+1.Europe/Amsterdam
GMT+1.Europe/Belgrade
GMT+1.Europe/Brussels
GMT+1.Europe/Sarajevo
GMT+1.Africa/Brazzaville
GMT+1.Africa/Windhoek
GMT+2.Asia/Amman
GMT+2.Europe/Athens
GMT+2.Asia/Beirut
GMT+2.Africa/Cairo
GMT+2.Africa/Harare
GMT+2.Europe/Helsinki
GMT+2.Asia/Jerusalem
GMT+3.Asia/Baghdad
GMT+3.Asia/Kuwait
GMT+3.Europe/Minsk
GMT+3.Europe/Moscow
GMT+3.Africa/Nairobi
GMT+4.Asia/Baku
GMT+4.Asia/Dubai
GMT+4.Asia/Tbilisi
GMT+4.Asia/Yerevan
GMT+5.Asia/Karachi
GMT+5.Asia/Oral
GMT+5.Asia/Yekaterinburg
GMT+6.Asia/Almaty
GMT+7.Asia/Bangkok
GMT+7.Asia/Krasnoyarsk
GMT+8.Asia/Shanghai
GMT+8.Asia/Hong_Kong
GMT+8.Asia/Irkutsk
GMT+8.Asia/Kuala_Lumpur
GMT+8.Australia/Perth
GMT+8.Asia/Taipei
GMT+9.Asia/Seoul
GMT+9.Asia/Tokyo
GMT+9.Asia/Yakutsk
GMT+10.Australia/Brisbane
GMT+10.Pacific/Guam
GMT+10.Australia/Hobart
GMT+10.Asia/Magadan
GMT+10.Australia/Sydney
GMT+10.Asia/Vladivostok
GMT+12.Pacific/Auckland
GMT+12.Pacific/Fiji
GMT+12.Pacific/Majuro
GMT+13.Pacific/Tongatapu

System.DateAndTime.AutoAdjustClockForDST

AutomatedDaylightSavingDisabled

AutomatedDaylightSavingEnabled

System.DateAndTime.TimeFormat

12h

24h (Default)

System.DateAndTime.DateOrder

dd.mm.yyyy (Default)

mm.dd.yyyy

System.DateAndTime.NTPDns

Not in web-interface: Enable/disable PTR queries for NTP

NTPDnsEnabled

NTPDnsDisabled

Parameter nameValue: allowed
Web-interface
WebUI.Language

en-us (Default)

Expand
titleComplete list

de-de

fr-fr

es-es

it-it

nb-no

nl-nl

tr-tr

pt-pt

el-gr

da-dk

sv-se

cs-cz

pl-pl

sl-sl

ro-ro

ru-ru

hu-hu

bg-bg

hr-hr

sr-rs

sq-al

WebUI.ShowPIN

0 = Show PIN No

1 = Show PIN Yes (Default)

PhoneUI.Security.PIN1234 (Default)Parameter name
Device settings not available via web-interface
Phone UI
PhoneUI.Settings.Volume

1 - 10: 5 (Default)

Menu - Settings - Audio - Ringtones -Volume

PhoneUI.Settings.Confirmations

0 (Default)

Menu - Settings - Audio - Advisory Tones - Confirmations

PhoneUI.Settings.KeyClick

0 (Default)

Menu - Settings - Audio - Advisory Tones - Key Click

PhoneUI.Settings.AnonymousCallSilencingMenu - Settings - Audio - Ringtones - Anonymous Call Silencing
PhoneUI.Audio.ReceiverVolume1 - 10: 3 (Default)
PhoneUI.Audio.HeadsetVolume1 - 10: 3 (Default)
PhoneUI.Audio.HandsfreeVolume1 - 10: 3 (Default)
PhoneUI.SelectedServices.Disable

0 = Show Selected Services menu in PhoneUI (Default)
1 = Hide Selected Servicesmenu in PhoneUI

PhoneUI.Keys.FunctionKeys.IconsTelephony.ShowKeysDisplayName0 =
Telephony.ShowKeysDisplayName0 = No
1 = Yes
PhoneUI.Keys.FunctionKeys.Indicator0 = Thin
1 = Bold 
No
1 = Yes
PhoneUI.ActiveRingbacks.Disable0 = Show Active Ringbacks menu item in PhoneUI (Default)
1 = Hide Active Ringbacks menu item in PhoneUI
PhoneUI.Audio.OneMelody.Doorstation
PhoneUI.Audio.OneMelody.External
PhoneUI.Audio.OneMelody.Group
PhoneUI.Audio.OneMelody.Internal
PhoneUI.Audio.OneMelody.Optional
PhoneUI.CallDivert.Disable0 = Show Call Divert menu item in PhoneUI (Default)
1 = Hide Call Divert menu in PhoneUI
PhoneUI.CallWaiting.Disable0 = Show Call Waiting menu item in PhoneUI (Default)
1 = Hide Call Waiting menu in PhoneUI
PhoneUI.Directory.Local.NameFirst
PhoneUI.Menu.Contacts.Visible0 = Hide Contacts menu in PhoneUI
1 = Show Contacts menu in PhoneUI (Default)
PhoneUI.WithholdNumber.Disable0 = Show Withhold Number menu item in PhoneUI (Default)
1 = Hide Withhold Number menu item in PhoneUI
WEB-UI
WebUI.CallSettings.CallWaiting.Disable

0 = Show Call waiting menu in Web-UI (Default)
1 = Hide Call waiting in Web-UI

WebUI.CallDivert.Disable

0 = Show Call Divert menu in Web-UI (Default)
1 = Hide Call Divert menu in Web-UI

Note: It will also enable/disable the function key Call Divert.

Others
PhoneUI.Settings.DistinctiveRinging

1 (Default) = Show all ringtones in MMI and web-interface
0 = Hide the Distinctive ringtones (External, Internal, Group, Doorstation) in MMI and web-interface. Used when provider does not support Distinctive ringtone.

SIP.Checksync.Simple

0 (default) = Device will not reboot automatic after check-sync.
If reboot=true is send then of course device will reboot
1 = Device will reboot automatic after check-sync. (same behavior as reboot=true is send)
If device will receive reboot=false then also reboot will happen.

Timer 1 only provisioning is done: Device will reboot 5 seconds after downloading provisioning file

Timer 2 also firmware update is started: Device will reboot 90 seconds after firmware file is downloaded.

(Device will not allow a reboot during these 90 seconds, it waits until the 90 seconds are passed)

Calls.Missed.Subscribe.Active

0 = inactive - Subscribe for MWI is not send to server, MWI displayed correctly
1 = active (default) - Subscribe for MWI is send to server, MWI displayed correctly

SoftKeys.X.Active

X=0 Left SoftKey, X=1 Right Softkey

0 = When SoftKey is FAC then change to disabled
1 = When SoftKey is FAC then change to enabled
SIP.Account.(0-3).RegistrationServer.ReregisterAlternative0 (Default) = Disabled, SIP re-REGISTER 50% of the negotiated expire timer.
1 = Enabled, SIP re-REGISTER 75% of the negotiated expire timer.
NetDir.LookupCacheValidationTime

adjustable lookup cache validation time

0 = buffer entries
1 = ask every lookup,
2 = refresh after 15min,
3 = refresh after 1h,
4 = refresh after 6h,
5 = refresh after 12h,
6 = refresh after 18h,
7 = refresh after 1day,
8 = refresh after 2days,
9 = refresh after 3days,
10 = refresh after 5days,
11 = refresh after 1week

Parameter nameValue: allowed
Web-interface: Expert - Network - Switch Settings
Switch Settings
NET.SwitchSettings.EnablePortMirroringEnable port mirroring:
0 = Disabled
1 = Enabled
NETWORK.SwitchSettings.LinkSpeedDuplexLanPort

Link speed and duplex mode - LAN Port

Autonegotiation
10 Mbit Half-Duplex
10 Mbit Full-Duplex
100 Mbit Half-Duplex
100 Mbit Full-Duplex
1000 Mbit Full-Duplex

NETWORK.SwitchSettings.LinkSpeedDuplexPcPort

Link speed and duplex mode - PC Port

Autonegotiation
10 Mbit Half-Duplex
10 Mbit Full-Duplex
100 Mbit Half-Duplex
100 Mbit Full-Duplex
1000 Mbit Full-Duplex
Disabled

NET.SwitchSettings.AllowFragmentation

Allow fragmentation of frames
0 = Disabled
1 = Enabled

Web-interface: Expert - Network - DHCP Settings
DHCP Settings
NET.IP.IPv4.DHCP.Options.Disabled43, 66, 114, 120
Web-interface: Expert - Audio - Adjustment
Adjustment
Audio.Adjustment.EnableAec

Enable AEC handset mode
Yes = Enabled
No = Disabled

MIC Level TX
Audio.Adjustment.HandsetModeHandset microphone TX level 0 - 10
Audio.Adjustment.HandsFreeModeHandsfree microphone TX level 0 - 10
Audio.Adjustment.HeadsetModeHeadset microphone TX level 0 - 10
Web-interface: Expert - Debugging - System Logging
Reboot
System.QA.AutomaticReboot.Enabled

0 = Disabled

1 = Enabled

System.QA.AutomaticReboot.Weekdays

Monday = 1

Tuesday = 2

Wednesday = 4

Thursday = 8

Friday = 16

Saturday = 32

Sunday = 64

Example: 

Monday AND Friday AND Sunday = 1 + 16 + 64 = 81

System.QA.AutomaticReboot.TimeTime in the following format HH:MM
example: 15:44
System Logging
System.Syslog.RemoteLogging.EnabledActivate Remote Syslog
0 = Disabled
1 = Enabled
System.Syslog.RemoteLogging.ServerSyslog server IP address
System.Syslog.RemoteLogging.PortSyslog server port (514)
Web-interface: Expert - Debugging -Advanced Settings
System.AllowHTTPOutgoing0 = Disabled
1 = Enabled
SIP.Notify.AcceptInvalidCSeqAccept Invalid CSeq
0 = Disabled
1 = Enabled
System.Security.RemoteControl.Allow0 = Disabled
1 = Enabled
System.Security.RemoteControl.SourceRemote Control Source

System.Provision.Multicast.Allow

SIP.Multicast.Active

Active SIP Multicast
System.General.RemoveUASpecialChars

Remove special characters
0 = Disabled
1 = Enabled