Page History

Example of ECOTEL VoIP trunk gateway settings 1/2.

Example of ECOTEL VoIP trunk gateway settings 2/2.

Registrar

Use here the SIP-Server / Registrar (received by ECOTEL).

trunk.sip-ecotel.de

Proxy

In individual cases, an entry here can lead to problems, therefore
This field should always remain free. (See Installation & Configuration Guide ECOTEL)

User

Enter here the Username (Benutzername), followed by '@trunk.sip-ecotel.de'. You have to enter the realm behind the username in order to properly register the trunk at the provider.

For example

021155007000@trunk.sip021155007000@sip-ecotel.de

Dial command

The dial command is the command which is used in the asterisk software. The term {number}  means, that the number (e.g. 021155007000) is dialled as entered. If you use a line access code (in most cases '0' is used), you have to add ':1' after "number".

Group

Select here the previously created gateway group.

Update remote party ID or P-Asserted-Identitiy (CLIP)

These settings can be left on the default setting (no - Deactivated)

From Domain

Enter here the Domain/Realm delivered by ECOTEL

trunk.sip-ecotel.de

T38 support

In order to have a better fax-support for fax-machines, connected to the FXS ports activate this option.

All tested scenarios were ok with this parameter activated.

Underneath the configuration parameter you will see a preview of the complete sip.conf file.