DX800 enabling Redirect Server

Dependent on the DX800 variant, it can be that the redirect server option is disabled. This can only be enabled via special configuration, for this you need a patch. The patch is based on the variant and contains the following settings to enable redirect server.

DX800 enable redirect

BS_IP_Data1.ucB_HAS_PROVISIONING_CODE=1
BS_IP_Data1.ucB_SHOW_PROVISIONING_CODE_IN_HS=1
BS_IP_Data1.ucB_AUTOPROVISIONING=0
BS_IP_Data1.ucI_AUTOPROVISIONING_STYLE=0
BS_IP_Data1.ucB_AUTO_UPDATE_PROFILE=1
BS_IP_Data3.ucI_ONESHOT_PROVISIONING_MODE_1=1
BS_IP_Data1.aucS_AUTOPROVISIONING_CODE=0x34,0x34,0x34

Via the restore option, you can activate the patch below. If you variant is not listed you need to request this from Gigaset.

Patch for DX800 Dutch variant DX800_Provisioning_Norm_patch.cfg
Patch for DX800 GER variant DX800_Provisioning_Norm_patch_de.cfg

Section

As most of the DX800 parameters are the same like N510, you can also use the online tools for N510 to create config files.

Parameter-Name	possible Values	Web-UI	Where to find / Description


	B_... - boolean expressed as 1/0.


	I_... - integer value in range +/-(2^15 - 1

)

)
	S_... - string value, e.g. “Ala ma kota” (entered without quotation signs).

Service-specific-data


I_TDS_AUTHENTICATION_MODE	0=ROM data / 1=USER data / 2=ROM or USER data / 3=SIP authentication mode	No	This parameter tells where HTTP auth login/password is stored. Value 3 is very usefull option. In this mode HTTP login and password will be get from first SIP account data.
B_TDS_TRANSMIT_MAC_ADDRESS

		No	should mac address of device be included in every request "bTDSTransmitMacAddress = 1".
S_TDS_ISO_3166_1

		Yes	WebUI-Country-code-for-Telephonebook-entry
S_TDS_TXT_AL_HEADER


S_TDS_TXT_NAME


S_AVAILABLE_OTDP

	Yes	WebUI-Available-Telephonbooks-under-Services (default:6B747467656E67736862736500FFFFFF)
S_TDS_MNEMONIC

		Yes	WebUI-Active-Telephonebook-under-Services
S_TDS_SERVICE_URL

		No	URL address of the phonebook server (must be ended with ?)
S_TDS_LOGIN

		No	if phonebook server requires authentication (only HTTP Digest MD5 is supported)
S_TDS_LOGIN_PASS

	No	CRYPTED password (password can be generate by sw-development)
I_TDS_CAPABILITIES

		No	provider capabilities "aucTDSCapabilities". Capabilities byte are combined from following bits: AEIP_OTDP_CAP_PEOPLE_SEARCH = 0x01, <-- white pages AEIP_OTDP_CAP_BUSINESS_SEARCH = 0x02, <-- yellow pages AEIP_OTDP_CAP_REVERSE_LOOKUP = 0x04, <-- search by phone number AEIP_OTDP_CAP_PRIVATE_NETWORK_DIRECTORY = 0x08, <-- 3rd book type - private phonebook AEIP_OTDP_CAP_AUTO_LOOKUP = 0x10, <-- if reverse lookup is active, all incoming calls will be looked inside netdir and caller name will be presented on display AEIP_OTDP_CAP_NICKNAME_FOR_PRIVATE_NETWORK_DIRECTORY = 0x20, <-- private phonebook supports user defined firmware AEIP_OTDP_CAP_ENCRYPT_POSTS = 0x40, <-- private phonebook - all sent data will be encrypted
S_TDS_TXT_MENU

	No	Handset-Telephonebook-Search-Menue-Header
S_TDS_TXT_HEADER

	No	Handset-Telephonebook-Search-Result-Header
S_TDS_TXT_SEARCH_1

	No	Handset-Telephonebook-Search-note-Line-1
S_TDS_TXT_SEARCH_2

		No	Handset-Telephonebook-Search-note-Line-2
S_TDS_TXT_DEP_MENU

	No	Handset-Yellowpages-Search-Menue-Header
S_TDS_TXT_DEP_HEADER

		No	Handset-Yellowpages-Search-Result-Header
S_TDS_TXT_DEP_SEARCH_1

		No	Handset-Yellowpages-Search-Note-Line-1
S_TDS_TXT_DEP_SEARCH_2

	No	Handset-Yellowpages-Search-Note-Line-2
S_OTDP_AUTH_PASS

No


S_TDS_TXT_PTD_MENU

		No	Handset-Private-Phonebook-Search-Menue-Header
S_TDS_TXT_PTD_HEADER

		No	Handset-Private-Phonebook-Search-Result-Header
S_TDS_TXT_PTD_SEARCH_1

		No	Handset-Private-Phonebook-Search-Note-Line-1
S_TDS_TXT_PTD_SEARCH_2

	No	Handset-Private-Phonebook-Search-Note-Line-2
S_OTDP_AUTH_NAME

No

IP Configuration


B_USE_DHCP	boolean true/false	Yes	Settings --> IP-configuration --> IP address type
I_IP

		Yes	Settings --> IP-configuration --> IP address
I_SUBNET_MASK

	Yes	Settings --> IP-configuration --> Subnet mask
I_DEFAULT_ROUTER

		Yes	Settings --> IP-configuration --> Default gateway
I_DNS_SERVER_1

	Yes	Settings --> IP-configuration --> Preferred DNS server
I_DNS_SERVER_2

	Yes	Settings --> IP-configuration --> Alternate DNS server
B_ACCEPT_FOREIGN_SUBNET	boolean true/false	Yes	Settings --> IP-configuration --> Allow access from other networks
B_HTTP_PROXY_ENABLED

	Yes	Settings --> IP-configuration --> Enable proxy
S_HTTP_PROXY_URL

		Yes	Settings --> IP-configuration --> Proxy server address
I_HTTP_PROXY_PORT

		Yes	Settings --> IP-configuration --> Proxy server port
B_SHOW_QUESTION_MARK_IN_WEB

		Yes	Question mark in the right-upper corner
B_SHOW_SECURITY_ADVICE

	Yes	Security advice after login if password or similar is not changed
I_HTTPLANGUAGE

		Yes	Before login you can change the WebUI-language
// enabled web languages


B_WEB_LANGUAGE_ENABLED_ENG

	Yes	Offered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_GER

		Yes	Offered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_FRE

		Yes	Offered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_ITA

		Yes	Offered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_NDL

	Yes	Offered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_ENGUS

		Yes	Offered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_ARA

		Yes	Offered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_RUS

		Yes	Offered languages for the WebUI (at login!)
B_SIP_USE_STUN_SHC

Advanced VOIP settings
		Yes	Settings --> Telephony --> Connections --> Gigaset.net --> STUN enabled


B_DTMF_TX_MODE_AUTO

		Yes	Settings --> Telephony --> Advanced Settings --> Send settings
I_DTMF_TX_MODE_BITS	(BITS!) 1=audio, 2=RFC 2833, 4=SIP INFO	Yes	Settings --> Telephony --> Advanced Settings --> Send settings
B_USE_R_KEY_FOR_CALL_TRANSFER

		Yes	Settings --> Telephony --> Advanced Settings --> Use R-Key to initiate call transfer with the SIP Refer method
B_CT_AFTER_ON_HOOK

		Yes	Settings --> Telephony --> Advanced Settings --> Transfer Call by On-Hook
B_USE_RANDOM_PORT

		Yes	Settings --> Telephony --> Advanced Settings --> Use random ports
I_SIP_LOCAL_PORT

		Yes	Settings --> Telephony --> Advanced Settings --> SIP port (min)
I_RTP_LOCAL_PORT

	Yes	Settings --> Telephony --> Advanced Settings --> RTP port (min)
I_SIP_LOCAL_PORT_MAX

		Yes	Settings --> Telephony --> Advanced Settings --> SIP port (max)
I_RTP_LOCAL_PORT_MAX

	Yes	Settings --> Telephony --> Advanced Settings --> RTP port (max)
B_VOIP_CALLWAITING_STATUS

Yes


B_CTO_REFER_TO_PREFERRED_CONTACT

		Yes	Settings --> Telephony --> Advanced Settings --> Preferred Refer To
B_CTO_REFER_TO_AUTOMATIC

Audio settings
		Yes	Settings --> Telephony --> Advanced Settings --> Automatic Refer To


B_ONLY_ONE_ACTIVE_VOIP_CALL

	Yes	Settings --> Telephony --> Audio --> Allow 1 VoIP Call only
I_SIP_PREDEFINED_VOCODER

Yes


I_SIP_AVAILABLE_VOCODER

Yes

Number

assignment

assignment
B_AUTOMATIC_FALLBACK_TO_PSTN

		Yes	Settings --> Telephony --> Number Assignment --> Automatic fallback to fixed line
B_ENHANCED_AUTOFALLBACK

		Yes	Settings --> Telephony --> Number Assignment --> Enhanced Auto-Fallback
S_PSTN_NAME

Dialing plans
		Yes	Settings --> Telephony --> Connections --> Fixed Line --> Connection Name or Number


I_DIALING_PLAN_COUNTRY_ID

		Yes	Settings --> Telephony --> Dialling Plans --> Country
S_CITY_CODE

		Yes	Settings --> Telephony --> Dialling Plans --> Local Area Code
B_USE_CITY_CODE

		Yes	Settings --> Telephony --> Dialling Plans --> Predial area code for local calls through VoIP
S_SIP_SHC_DISPLAYNAME

		No	Handset!! --> Call gigaset.net --> Options --> Own details
B_SHC_CALLFORWARDING_STATUS_1

	Yes	Settings --> Telephony --> Call Forwarding --> Gigaset.net
I_SHC_CALLFORWARDING_WHEN_1

		Yes	Settings --> Telephony --> Call Forwarding --> Gigaset.net --> When
S_SHC_CALLFORWARDING_NUMBER_1

	Yes	Settings --> Telephony --> Call Forwarding --> Gigaset.net --> Call number
B_SIP_SHC_ACCOUNT_IS_ACTIVE

E-mail
	No	Enable Gigaset.net account


S_EMAIL_SERVER

		Yes	Settings --> Messaging --> E-Mail --> POP3 Server
S_EMAIL_USERNAME

	Yes	Settings --> Messaging --> E-Mail --> Authentication Name
S_EMAIL_PASS

Info Services
		Yes	Settings --> Messaging --> E-Mail --> Authentication Password
I_EMAIL_POLL_TIME	Value in minutes	Yes	Settings --> Messaging --> E-Mail --> Check for new e-mail


B_SHOW_INFO_SERVICE_SERVER_ADVICE

	Yes	Settings --> Services --> Advice under "Activate Info Services"
B_INFO_SERVICE_ACTIVE

		Yes	Settings --> Services --> Activate Info Services
S_INFO_SERVICE_URL

Management Date &
		No	URL for the Info-Services-Server

Time

Time
S_TIME_NTP_SERVER

		Yes	Settings --> Management --> Date&Time --> Time Server
B_TIME_USE_AUTOMATIC_NTP_SYN

		Yes	Settings --> Management --> Date&Time --> Automatic adjustment of System Time with time server
I_TIME_COUNTRY

	Yes	Settings --> Management --> Date&Time --> Country
I_TIME_TIMEZONE

		Yes	Settings --> Management --> Date&Time --> Time Zone
B_TIME_USE_AUTOMATIC_DST

	Yes	Settings --> Management --> Date&Time --> Automatically adjust clock to summer-time changes
B_HAS_NTP_SETTINGS

No

Miscellaneous


B_SHOW_VOIP_STATUS_ON_HANDSET

Firmware Update
	Yes	Settings --> Management --> Miscellaneous --> Show VoIP status on handset


S_DATA_SERVER

Provisioning-specific-data
		Yes	URL for the gigaset.net-server


// TR-069


S_DEV_MGMT_SRVR_URL

No


S_DEV_MGMT_SRVR_USER

No


S_DEV_MGMT_SRVR_PW

No

I_DEV_MGMT_SRVR_INF_EN

No


I_DEV_MGMT_SRVR_INF_INTV_O

No


S_DEV_MGMT_SRVR_PARKEY

No

S_DEV_MGMT_SRVR_CONN_USER

No

S_DEV_MGMT_SRVR_CONN_PW

No


S_DEV_MGMT_SRVR_OUI

No


S_DEV_PRODCLASS

No


S_DEV_MGMT_SRVR_SERNUM

No

B_TR069_SEND_TRANSF_COMPL

No


S_TR069_COMMAND_KEY

No


S_TR069_AES_KEY

No


B_BOOTSTRAP_TRIGGER

No

B_TR69_MGMT_ENABLED

No

I_DEV_MGMT_SRVR_INF_INTV

No


B_HAS_PROVISIONING_CODE

No

B_SHOW_PROVISIONING_CODE_IN_HS

No


B_DO_AUTOMATIC_UPDATES

		Yes	General indication if a check for new FW / Profie will occur every night.
B_AUTO_UPDATE_FW

		No	Indication if a new firmware will be stored directly, without user interaction and signalling via MWI (forced update).
B_AUTO_UPDATE_PROFILE

	No	Indication if a new Profile will be stored directly, without user interaction and signalling via MWI (forced update).
I_REMINDER_FW_UPDATE

		No	Value in "x" days! If the value is greater than 0, the customer will get a reminder via MWI again after "x" days.
I_REMINDER_PROFILE_UPDATE

	No	Value in "x" days! If the value is greater than 0, the customer will get a reminder via MWI again after "x" days.
S_USER_FIRMWARE_URL

No

// Auto-Provisioning Codes/Modes


S_AUTOPROVISIONING_CODE

	Yes	Settings --> Telephony --> Account 1 --> Auto Configuration Code
S_AUTOPROVISIONING_CODE_2

		Yes	Settings --> Telephony --> Account 2 --> Auto Configuration Code
S_AUTOPROVISIONING_CODE_3

	Yes	Settings --> Telephony --> Account 3 --> Auto Configuration Code
S_AUTOPROVISIONING_CODE_4

	Yes	Settings --> Telephony --> Account 4 --> Auto Configuration Code
S_AUTOPROVISIONING_CODE_5

		Yes	Settings --> Telephony --> Account 5 --> Auto Configuration Code
S_AUTOPROVISIONING_CODE_6

		Yes	Settings --> Telephony --> Account 6 --> Auto Configuration Code
I_ONESHOT_PROVISIONING_MODE_1

No

I_ONESHOT_PROVISIONING_MODE_2

No

I_ONESHOT_PROVISIONING_MODE_3

No

I_ONESHOT_PROVISIONING_MODE_4

No

I_ONESHOT_PROVISIONING_MODE_5

No


I_ONESHOT_PROVISIONING_MODE_6

No

Page tree

Versions Compared

Old Version 3

New Version Current

Key

DX800 enabling Redirect Server

Page tree

Page History

Versions Compared

Old Version 3

New Version Current

Key

DX800 enabling Redirect Server