Versions Compared

Old Version 10

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version 11

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section

Software 2.20.6, January 2018
Bug-fixes and improvements:

  • IVR in pre-connection mode: device has not yet received the 200OK/SDP (no charge) during the greeting message and must send DTMF

  • Maxwell 3/2/b WebGui - Target number field does accept all characters

  • [Broadsoft] Directories - Switch to enable/disable auto-lookup

  • [Broadsoft] Flexible seating functionality

  • [Broadsoft] Remote Office

  • Possibility to disable the PC Port

  • Same VLAN ID cannot be set for "NET" and "PC" port

  • Incoming call during active Call (Call waiting) shows the "via (Line)" information

  • Possibility to search the Local Phone-book

  • [Maxwell 3 - Function Keys] Target number field accepts special characters

  • Basic support for speaker Jabra 510

  • Accepting SRTP calls with RTP/AVP and crypto

  • Setting same VLAN ID to LAN and PC port prohibited

  • [XML directory] HTTP digest authentication doesn't work

  • Cannot make a consultation/call transfer from Call-list

  • Search for "Name" in the 'advanced search' doesn't work

  • [XML Directories] Maxwell does not return to proper entry

  • [Broadsoft] BLF's disappear after entering Select Services via PhoneUI

  • Problems with searching in XML directories

  • Two accounts with the same number are not distinguished

  • [Call list] No automatic refresh of the Call List on Maxwell after deleting entries on Server

  • [LDAP] Incorrect speech path mode while outgoing call from 'Select number'

  • [Broadsoft] BLF's disappear after entering Select Services via PhoneUI

  • [XML Directory] Incorrect name on calling screen

  • [XSI] Group and Enterprise Directory - randomly empty

  • When on call via receiver the Function key dialing is done via hands-free

  • REFER with triple Supported: event-list

  • Transfer to contact from Call history impossible

  • [SIP] Subscribe timers don't work immediately after change

  • [SIP] BLF subscription isn't changed immediately

  • No IP address after boot

Section

Software 2.19.6, November 2017
Bug-fixes and improvements:

  • SIP timers verification
  • tftp can be used for provisioning
  • Translations are updated
  • Call Park & Retrieve

  • Display improvement for Multiple lines support

  • [FunctionKeys] BLF and Line key are signalling the status for setting "Standard"
  • Display Call lists in web-interface
  • Delete SIP message display on Maxwell via empty SIP message
  • Increase Standby Brigthness of Display
  • Brightness adjustment via MMI and Web-UI
  • [Provisioning] If provisioning.xml is not present, MAC.xml is downloaded
  • No WebUI access after network settings changed
  • BLF - reduce network traffic, without losing subscriptions on server
  • Increase Standby Brigthness of Display
  • Fail-over / fall-back - remove additional DNS query A
  • Disconnect network cable during provisioning is stopping the provisioning process
  • BLF - wrong status indication on second connection
  • Ringtone handling via provisioning
  • Firmware update is proceded, even if provisioning fails
  • BLF - network traffic reduced
  • Subscription to Broadsoft BLF need to be reorganize
  • Synchronize BLF with Expansion module connect status
  • FK "Line" when Call waiting is off does not work properly
  • [WebUI][IE] Certificate details are not displayed
  • Maxwell 3/B with provider Siptize- outgoing calls are not possible because the destination port is not correct
  • Have to press the PTT button twice to take a call
  • Maxwell does not upload configuration to server
  • Missing pop up: File is not supported
  • Impossible ringing from Phone-book
  • [Maxwell 3] French translation issue
  • [WebUI] User password accepts invalid characters
  • [Broadsoft][BLF] SIP Subscribe is sent also for non-default account
  • Phone PIN on WebUI is not working as expected
  • SIP application crash when send BLF SUBSCRIBE in fail-over / fall-back scenario
  • [XSI phone-book] Maxwell doesn't request for a next part of data while scrolling using long press
  • [WebUI][Broadsoft] Missing 'Entry too long' label while enter too long name
  • [LDAP] Additional attribute is not visible if set as callable
  • "Call Completed Elsewhere" no longer working
  • [LDAP] Maxwell does not go to Select Number screen
  • XML directories - missing popup
  • Failed Registration Retry Timer is not used
  • SIP crashes on outgoing calls - resolved
  • [LDAP] Call History request for name lookup when LDAP directory is disabled
  • Maxwell doesn't change + to 000, when use contact from redial list
  • [Broadsoft] No space character between CNIP and CLIP during consultation.
  • [LDAP] Select Line state is not reached after Off Hook

...